Download or read book Materials for Energy Efficiency and Thermal Comfort in Buildings written by Matthew R Hall and published by Elsevier. This book was released on 2010-04-21 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation

Download or read book Thermal Comfort and Energy Efficient Cooling of Nonresidential Buildings written by Doreen E. Kalz and published by Springer Science & Business Media. This book was released on 2014-03-26 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book supports HVAC planners in reducing the cooling energy demand, improving the indoor environment and designing more cost-effective building concepts. High performance buildings have shown that it is possible to go clearly beyond the energy requirements of existing legislation and obtaining good thermal comfort. However, there is still a strong uncertainty in day-to-day practice due to the lack of legislative regulations for mixed-mode buildings which are neither only naturally ventilated nor fully air-conditioned, but use a mix of different low-energy cooling techniques. Based on the findings from monitoring campaigns (long-term measurements in combination with field studies on thermal comfort), simulation studies, and a comprehensive review on existing standards and guidelines, this book acts as a commonly accessible knowledge pool for passive and low-energy cooling techniques.

Download or read book Thermal Comfort and Energy Efficient Cooling of Nonresidential Buildings written by Doreen Kalz and published by . This book was released on 2014-04-30 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Building Control Systems written by John T. Wen and published by Springer. This book was released on 2017-12-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers of this book will be shown how, with the adoption of ubiquituous sensing, extensive data-gathering and forecasting, and building-embedded advanced actuation, intelligent building systems with the ability to respond to occupant preferences in a safe and energy-efficient manner are becoming a reality. The articles collected present a holistic perspective on the state of the art and current research directions in building automation, advanced sensing and control, including: model-based and model-free control design for temperature control; smart lighting systems; smart sensors and actuators (such as smart thermostats, lighting fixtures and HVAC equipment with embedded intelligence); and energy management, including consideration of grid connectivity and distributed intelligence. These articles are both educational for practitioners and graduate students interested in design and implementation, and foundational for researchers interested in understanding the state of the art and the challenges that must be overcome in realizing the potential benefits of smart building systems. This edited volume also includes case studies from implementation of these algorithms/sensing strategies in to-scale building systems. These demonstrate the benefits and pitfalls of using smart sensing and control for enhanced occupant comfort and energy efficiency.

Download or read book Thermal Comfort written by P. O. Fanger and published by . This book was released on 1970 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Thermal Comfort Principles and Practice written by Fergus Nicol and published by Routledge. This book was released on 2012-03-15 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental function of buildings is to provide safe and healthy shelter. For the fortunate they also provide comfort and delight. In the twentieth century comfort became a 'product' produced by machines and run on cheap energy. In a world where fossil fuels are becoming ever scarcer and more expensive, and the climate more extreme, the challenge of designing comfortable buildings today requires a new approach. This timely book is the first in a trilogy from leaders in the field which will provide just that. It explains, in a clear and comprehensible manner, how we stay comfortable by using our bodies, minds, buildings and their systems to adapt to indoor and outdoor conditions which change with the weather and the climate. The book is in two sections. The first introduces the principles on which the theory of adaptive thermal comfort is based. The second explains how to use field studies to measure thermal comfort in practice and to analyze the data gathered. Architects have gradually passed responsibility for building performance to service engineers who are largely trained to see comfort as the ‘product’, designed using simplistic comfort models. The result has contributed to a shift to buildings that use ever more energy. A growing international consensus now calls for low-energy buildings. This means designers must first produce robust, passive structures that provide occupants with many opportunities to make changes to suit their environmental needs. Ventilation using free, natural energy should be preferred and mechanical conditioning only used when the climate demands it. This book outlines the theory of adaptive thermal comfort that is essential to understand and inform such building designs. This book should be required reading for all students, teachers and practitioners of architecture, building engineering and management – for all who have a role in producing, and occupying, twenty-first century adaptive, low-carbon, comfortable buildings.

Download or read book Heating and Cooling of Buildings written by Jan F. Kreider and published by CRC Press. This book was released on 2009-12-28 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: The art and the science of building systems design evolve continuously as designers, practitioners, and researchers all endeavor to improve the performance of buildings and the comfort and productivity of their occupants. Retaining coverage from the original second edition while updating the information in electronic form, Heating and Cooling of Buildings: Design for Efficiency, Revised Second Edition presents the technical basis for designing the lighting and mechanical systems of buildings. Along with numerous homework problems, the revised second edition offers a full chapter on economic analysis and optimization, new heating and cooling load procedures and databases, and simplified procedures for ground coupled heat transfer calculations. The accompanying CD-ROM contains an updated version of the Heating and Cooling of Buildings (HCB) software program as well as electronic appendices that include over 1,000 tables in HTML format that can be searched by major categories, a table list, or an index of topics. Ancillary information is available on the book’s website www.hcbcentral.com From materials to computers, this edition explores the latest technologies exerting a profound effect on the design and operation of buildings. Emphasizing design optimization and critical thinking, the book continues to be the ultimate resource for understanding energy use in buildings.

Download or read book Heating and Cooling of Buildings written by T. Agami Reddy and published by CRC Press. This book was released on 2016-09-01 with total page 1281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and Cooling of Buildings: Principles and Practice of Energy Efficient Design, Third Edition is structured to provide a rigorous and comprehensive technical foundation and coverage to all the various elements inherent in the design of energy efficient and green buildings. Along with numerous new and revised examples, design case studies, and homework problems, the third edition includes the HCB software along with its extensive website material, which contains a wealth of data to support design analysis and planning. Based around current codes and standards, the Third Edition explores the latest technologies that are central to design and operation of today’s buildings. It serves as an up-to-date technical resource for future designers, practitioners, and researchers wishing to acquire a firm scientific foundation for improving the design and performance of buildings and the comfort of their occupants. For engineering and architecture students in undergraduate/graduate classes, this comprehensive textbook:

Download or read book Building Services Design for Energy Efficient Buildings written by Paul Tymkow and published by Routledge. This book was released on 2013-07-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role and influence of building services engineers is undergoing rapid change and is pivotal to achieving low-carbon buildings. However, textbooks in the field have largely focused on the detailed technicalities of HVAC systems, often with little wider context. This book addresses that need by embracing a contemporary understanding of energy efficiency imperatives, together with a strategic approach to the key design issues impacting upon carbon performance, in a concise manner. The key conceptual design issues for planning the principal systems that influence energy efficiency are examined in detail. In addition, the following issues are addressed in turn: Background issues for sustainability and the design process Developing a strategic approach to energy-efficient design How to undertake load assessments System comparison and selection Space planning for services Post-occupancy evaluation of completed building services In order to deliver sustainable buildings, a new perspective is needed amongst building and services engineering designers, from the outset of the conceptual design stage and throughout the whole design process. In this book, students and practitioners alike will find the ideal introduction to this new approach.

Download or read book Passive Cooling of Buildings written by D. Asimakopoulos and published by Routledge. This book was released on 2013-10-31 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy use in buildings in the EU represents about 40% of the total annual energy consumption. With greater awareness of the need to reduce energy consumption comes a growth of interest in passive cooling, particularly as an alternative to air-conditioning. This book describes the fundamentals of passive cooling together with the principles and formulae necessary for its successful implementation. The material is comprised largely of information and results compiled under the SAVE European Research Programme.

Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-06-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.

Download or read book Solar Energy in Buildings written by Dorota Chwieduk and published by Elsevier. This book was released on 2014-06-19 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Energy in Buildings presents solar radiation fundamentals and their applications in buildings, supported by theoretical analysis and results of original simulation studies in solar energy availability, collection, and conversion for both active and passive use. In-depth coverage of energy balance and heat transfer in building envelopes is supported by the inclusion of calculations and case studies, while contextualizing within an integrated design approach. - Explains the best uses of cutting-edge advances such as concentrated solar thermal, thermoelectric and polymetric materials - Covers active and passive solar collection and conversion systems - Provides energy balance calculations and case studies deriving from real installations connect theory and practice

Download or read book Urban Overheating Progress on Mitigation Science and Engineering Applications written by Michele Zinzi and published by MDPI. This book was released on 2019-04-04 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of global warming and urban sprawl is the origin of the most hazardous climate change effect detected at urban level: Urban Heat Island, representing the urban overheating respect to the countryside surrounding the city. This book includes 18 papers representing the state of the art of detection, assessment mitigation and adaption to urban overheating. Advanced methods, strategies and technologies are here analyzed including relevant issues as: the role of urban materials and fabrics on urban climate and their potential mitigation, the impact of greenery and vegetation to reduce urban temperatures and improve the thermal comfort, the role the urban geometry in the air temperature rise, the use of satellite and ground data to assess and quantify the urban overheating and develop mitigation solutions, calculation methods and application to predict and assess mitigation scenarios. The outcomes of the book are thus relevant for a wide multidisciplinary audience, including: environmental scientists and engineers, architect and urban planners, policy makers and students.

Download or read book The Passivhaus Designer s Manual written by Christina Hopfe and published by Routledge. This book was released on 2015-10-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passivhaus is the fastest growing energy performance standard in the world, with almost 50,000 buildings realised to date. Applicable to both domestic and non-domestic building types, the strength of Passivhaus lies in the simplicity of the concept. As European and global energy directives move ever closer towards Zero (fossil) Energy standards, Passivhaus provides a robust ‘fabric first’ approach from which to make the next step. The Passivhaus Designers Manual is the most comprehensive technical guide available to those wishing to design and build Passivhaus and Zero Energy Buildings. As a technical reference for architects, engineers and construction professionals The Passivhaus Designers Manual provides: State of the art guidance for anyone designing or working on a Passivhaus project; In depth information on building services, including high performance ventilation systems and ultra-low energy heating and cooling systems; Holistic design guidance encompassing: daylight design, ecological materials, thermal comfort, indoor air quality and economics; Practical advice on procurement methods, project management and quality assurance; Renewable energy systems suitable for Passivhaus and Zero Energy Buildings; Practical case studies from the UK, USA, and Germany amongst others; Detailed worked examples to show you how it’s done and what to look out for; Expert advice from 20 world renowned Passivhaus designers, architects, building physicists and engineers. Lavishly illustrated with nearly 200 full colour illustrations, and presented by two highly experienced specialists, this is your one-stop shop for comprehensive practical information on Passivhaus and Zero Energy buildings.

Download or read book Building Services Design for Energy Efficient Buildings written by Paul Tymkow and published by Taylor & Francis. This book was released on 2020-07-12 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role and influence of building services engineers are undergoing rapid change and are pivotal to achieving low-carbon buildings. However, textbooks in the field have tended to remain fairly traditional with a detailed focus on the technicalities of heating, ventilation and air conditioning (HVAC) systems, often with little wider context. This book addresses that need by embracing a contemporary understanding of the urgent challenge to address climate change, together with practical approaches to energy efficiency and carbon mitigation for mechanical and electrical systems, in a concise manner. The essential conceptual design issues for planning the principal building services systems that influence energy efficiency are examined in detail. These are HVAC and electrical systems. In addition, the following issues are addressed: background issues on climate change, whole-life performance and design collaboration generic strategies for energy efficient, low-carbon design health and wellbeing and post occupancy evaluation building ventilation air conditioning and HVAC system selection thermal energy generation and distribution systems low-energy approaches for thermal control electrical systems, data collection, controls and monitoring building thermal load assessment building electric power load assessment space planning and design integration with other disciplines. In order to deliver buildings that help mitigate climate change impacts, a new perspective is required for building services engineers, from the initial conceptual design and throughout the design collaboration with other disciplines. This book provides a contemporary introduction and guide to this new approach, for students and practitioners alike.

Download or read book The Limits of Thermal Comfort written by and published by . This book was released on 2013 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Urban Microclimate Modelling for Comfort and Energy Studies written by Massimo Palme and published by Springer Nature. This book was released on 2021-04-08 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​​This book discusses urban microclimate and heat-related risks in urban areas, brought on by the combination of global climate change effects and local modification of climate determined by extensive urbanization such as the ‘Urban heat island’ phenomenon. This matter is relevant to almost all urbanized areas in the world, where the increase of urban population and air temperature is expected to endanger both the overall health of the population and the energy supply for the functioning of urban systems. The book details the inter-relationship between urban morphology, microclimate and building energy performance and presents a multidisciplinary approach that brings together Urban Climatology, Engineering and Architectural knowledge to support the development of reliable models and tools for research and practice. This book is a useful tool for architects and building energy modelers, urban planners and geographers who need a practical guide to realize basic urban microclimate simulation for use in both academic research and planning practice.