Download or read book Thermal Coatings for Titanium Aluminum Alloys written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-23 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium aluminides and titanium alloys are candidate materials for use in hot structure and heat-shield components of hypersonic vehicles because of their good strength-to-weight characteristics at elevated temperature. However, in order to utilize their maximum temperature capability, they must be coated to resist oxidation and to have a high total remittance. Also, surface catalysis for recombination of dissociated species in the aerodynamic boundary layer must be minimized. Very thin chemical vapor deposition (CVD) coatings are attractive candidates for this application because of durability and very light weight. To demonstrate this concept, coatings of boron-silicon and aluminum-boron-silicon compositions were applied to the titanium-aluminides alpha2 (Ti-14Al-21Nb), super-alpha2 (Ti-14Al-23-Nb-2V), and gamma (Ti-33Al-6Nb-1Ta) and to the titanium alloy beta-21S (Ti-15Mo-3Al-3Nb-0.2Si). Coated specimens of each alloy were subjected to a set of simulated hypersonic vehicle environmental tests to determine their properties of oxidation resistance, surface catalysis, radiative emittance, and thermal shock resistance. Surface catalysis results should be viewed as relative performance only of the several coating-alloy combinations tested under the specific environmental conditions of the LaRC Hypersonic Materials Environmental Test System (HYMETS) arc-plasma-heated hypersonic wind tunnel. Tests were also conducted to evaluate the hydrogen transport properties of the coatings and any effects of the coating processing itself on fatigue life of the base alloys. Results are presented for three types of coatings, which are as follows: (1) a single layer boron silicon coating, (2) a single layer aluminum-boron-silicon coating, and (3) a multilayer coating consisting of an aluminum-boron-silicon sublayer with a boron-silicon outer layer. Cunnington, George R. and Clark, Ronald K. and Robinson, John C. Langley Research Center ALUMINIDES; ENVIRONMENTAL TESTS; HYPERSONIC VEHI...
Download or read book Thermal Coatings for Titanium aluminum Alloys written by George R. Cunnington and published by . This book was released on 1993 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Sputter Deposition written by Diederik Depla and published by Springer Science & Business Media. This book was released on 2008-06-24 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.
Download or read book ASM Ready Reference written by Fran Cverna and published by ASM International. This book was released on 2002-01-01 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quick and easy to use source for qualified thermal properties of metals and alloys. The data tables are arranged by material hierarchy, with summary tables sorted by property value. Values are given for a range of high and low temperatures. Short technical discussions at the beginning of each chapter are designed to refresh the reader's understanding of the properties and units covered in that section
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Titanium and Titanium Alloys written by and published by . This book was released on 1974 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Aluminium Alloys for Thermal Spray Applications to Steel Substrates written by Sampan Seth and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties. Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications. With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1961-10 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Properties of Titanium and Titanium Alloys written by J. W. Holladay and published by . This book was released on 1958 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book U S Government Research Reports written by and published by . This book was released on 1962 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Cold Spray Coatings written by Pasquale Cavaliere and published by Springer. This book was released on 2017-11-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material coatings and Finishes heat Treat Protective titanium Alloys written by D. S. PRATT and published by . This book was released on 1959 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten materials were examined as protective coatings for Ti alloys during heat treatment. Butyl titanate performed the best of the 10 materials. A 10 mil sprayed coating of butyl titanate prevented surface contamination on Ti-6A1-4V from exceeding 0.5 mil. Sheet material with 0.5 mil contamination was successfully bent over a die having a radius 4 times the metal thickness. Knoop hardness uniformly averaged 333! 12 overA 9.8 MIL DISTANCE IN FROM THE EDGE OF THE TEST PIECE. (Author).
Download or read book World Aluminum Abstracts written by and published by . This book was released on 1973 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
