Download or read book Thermal and Nonthermal Encapsulation Methods written by Magdalini Krokida and published by CRC Press. This book was released on 2017-09-27 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encapsulation is a topic of interest across a wide range of scientific and industrial areas, from pharmaceutics to food and agriculture, for the protection and controlled release of various substances during transportation, storage, and consumption. Since encapsulated materials can be protected from external conditions, encapsulation enhances their stability and maintains their viability. This book offers a comprehensive review of conventional and modern methods for encapsulation. It covers various thermal and nonthermal encapsulation methods applied across a number of industries, including freeze drying, spray drying, spray chilling and spray cooling, electrospinning/electrospraying, osmotic dehydration, extrusion, air-suspension coating, pan coating, and vacuum drying. The book presents basic fundamentals, principles, and applications of each method, enabling the reader to gain extended knowledge. The choice of the most suitable encapsulation technique is based on the raw materials, the required size, and the desirable characteristics of the final products.

Download or read book Encapsulation in Food Processing and Fermentation written by Steva Lević and published by CRC Press. This book was released on 2022-08-18 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food technology has adopted new principles and practices that are rapidly changing the food sector. New foods are now available under more uniform standards and better quality control. Globalised food market offers opportunities for manufacturers to increase production and profit, and at the same time, consumers benefit from the choice of food products like never before. All this is possible only because of the innovations in the food sector. One of such innovations is encapsulation technology, which aims to preserve food quality, enhance the sensorial properties of food and increase the efficiency in food processing. This book discusses the uses of encapsulation technology in food practices and conventional processes and also highlights new directions in food processing. In the introductory chapters’ review of encapsulation technologies, carrier materials and criteria for their selection, analytical methods for characterisation of encapsulated products and some aspects of product design and process optimisation. The most important achievements of encapsulation technology in the food sector are reviewed in the later chapters related to encapsulation of food ingredients, food biocatalysts and examples of usage of encapsulated active ingredients in the dairy and meat industry, beverage production, etc. In addition, the implementation of nanotechnology in the food sector is reviewed, emphasizing the most important materials and technologies for the production of nanoencapsulates. The book is a valuable source of information on encapsulation technology, for academia and industry, especially the food sector, with the aim of enhancing knowledge transfer.

Download or read book Engineering Plant Based Food Systems written by Sangeeta Prakash and published by Academic Press. This book was released on 2022-11-16 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Plant-Based Food Systems provides a comprehensive, in-depth understanding on the technologies used to create quality plant-based foods. This title helps researchers and food processors gain an understanding of the diverse aspects of plant-based foods, with a focus to meet the current consumers' demand of alternatives to animal products. This is a one-stop source that provides maximum information related to plant-based foods to food science researchers, food engineers and food processing/manufacturers. This book will enhance their understanding of plant-based protein sources, their application, product manufacturing, and bioavailability. In recent years, the emphasis on minimizing environmental footprints (climate change, greenhouse gas emissions, deforestation, and loss of biodiversity) and human health issues related to animal source food intakes has shifted the attention of researchers, dietitians and health professionals from animal-based diets to diets rich in plant-based foods (legumes, nuts, seeds). - Explores the plant sources available for extraction of proteins, the various extraction methods and the quality and functionality of the extracted proteins - Describes existing plant-based foods such as beverages, yogurts, spreads, fermented foods and meats - Provides information related to various plant based functional components such as polyphenols, phytosterols, aromatics and essential oils, etc.

Download or read book Food Fortification written by Khalid Bashir and published by CRC Press. This book was released on 2024-06-10 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world that is constantly evolving, our understanding of nutrition and its impact on human health has grown exponentially. Food, once merely a source of sustenance, is now recognized as a powerful tool for improving public health and well-being. Organized into four sections, Food Fortification: Trends and Technologies presents a comprehensive exploration of food fortification—from its historical roots to its modern applications. Part I introduces the concept of food fortification as a potential strategy for the control of micronutrient malnutrition and the role of micronutrients in human health, recommended dietary allowance, and source. It also details the deficiency, prevalence, populations under risk, and factors contributing to micronutrient deficiency. Part II summarizes the prevalence, causes, and consequences of vitamin deficiencies. It lays a framework for national and international fortification programs. In addition, it provides information about case studies, the impact of fortification on food textural and sensory properties, as well as challenges with currently used fortification methods. Part III provides technical information on various minerals that can be used to fortify foods, including their chemistry, absorption, metabolism, and biological role. It also reviews their applications in specific food vehicles. Part IV describes the key steps involved in food bioactive fortification. This section also deals with the fortification of multigrain flour and challenges associated with PUFA fortification. It also highlights the important roles of encapsulation on bioavailability, with examples of fortification in dairy, egg, bakery, confectionery, and other products. This book delves into the critical realm of fortifying our food supply to address the complex nutritional challenge and is a tribute to the progress that has been made in food fortification over the past few decades, as well as a call to action for the work that still lies ahead.

Download or read book Nonthermal Processing in Agri Food Bio Sciences written by Anet Režek Jambrak and published by Springer Nature. This book was released on 2022-09-26 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses important questions on the legislation, regulations, sustainability, technology transfer, safety of biomaterials and mechanism of action of nonthermal processing on the molecular level of biomaterials and its impact on health. The chapters take an interdisciplinary approach that is of interest to specialists from engineering, physics, chemistry, agriculture, life sciences and beyond, with a focus on further development of existing and new applications of nonthermal processing and their combination with other methods in the processing of biomaterials, agriculture, biotechnology and the re-use of waste and by-products. Nonthermal Processing in Agri-Food-Bio Sciences: Sustainability and Future Goals aims to boost further developments and applications of nonthermal technologies to develop healthier products, to ensure consumer approval for these innovative technologies and to improve the sustainability of biomaterials production.​ The industrial application of nonthermal processing has led to an increase in innovative value products and the overall improvement of production capacity. Nonthermal processes use less energy and chemicals, reduce processing times, have less environmental impact, produce less waste, and have the potential for industrial scale-up and a return-on-investment in under 5 years. According to The United Nations and the 2030 Agenda for Sustainable Development, 17 goals should be incorporated within development projects, and researchers are starting to use novel techniques to meet them. In covering the fundamental engineering theories underlying nonthermal processing, this book will aid in this mission. The book overviews the advantages and disadvantages of novel technologies, over to sustainability goals to correct steps for the scale-up and return on investment. The book includes the chemistry and physics of nonthermal processing technologies, dedicated to specialists and researchers from a wide range of subject areas. Interdisciplinary scientists and engineers, sustainability experts can use this text to aid in their work in green technologies.

Download or read book Sustainable Agricultural and Food Systems Engineering written by Jose Juan Buenrostro-Figueroa and published by CRC Press. This book was released on 2024-12-13 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing valuable research on the latest topics in sustainable agriculture and food systems engineering, this new volume covers key concepts on sustainable agriculture, food systems engineering for sustainable development, and agroecological transitions as an interdisciplinary field that comprises the concepts of agronomy, economics, and livestock farming sciences. It also reports on important techniques in transforming new concepts involved in both agricultural production and food consumption choices.

Download or read book Food Structure Engineering and Design for Improved Nutrition Health and Well being written by Miguel Angelo Parente Ribei Cerqueira and published by Academic Press. This book was released on 2022-10-18 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Structure Engineering and Design for Improved Nutrition, Health and Wellbeing presents new insights on the development of new healthy foods and the understanding of food structure effect on nutrition, health and wellbeing. Sections cover a) New ingredients, typicity and ethnicity of foods in different cultures and geographic regions; b) New and innovative strategies for food structure development; c) Strategies to address the challenges for healthier food products, such the reduction of sugar, salt and fats; d) Assessment of health effect of foods by in vitro and in vivo tests, and more. Edited by experts in the field, and contributed by scientists of different areas such as nutritionists and food engineers, this title offers a broad overview of the field to the readers, boosting their capability to integrate different aspects of product development. - Brings examples and strategies on how to improve the nutritional value of foods through food engineering and design - Includes a broad vision of food trends and their impact in new product development - Features the newest methodologies and techniques for the analysis of developed food products

Download or read book Advances in Food and Nutrition Research written by Fidel Toldra and published by Academic Press. This book was released on 2022-06-02 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Food and Nutrition Research, Volume 100 provides the latest advances on emerging bioactive compounds with putative health benefits and their controlled release and application in foods and nutraceuticals, as well as up-to-date information on recent developments in food technology, including 3D printing, safety of raw materials and viruses in foods, and new low energy food processing. - Contains contributions that have been carefully selected based on their vast experience and expertise on the subject - Includes updated, in-depth and critical discussions of available information, giving the reader a unique opportunity to learn - Encompasses a broad view of the topics at hand

Download or read book Thermal and Nonthermal Encapsulation Methods written by Magdalini Krokida and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 6: Osmotic Dehydration and Combined Processes for Tissue Modification and Selective Ingredient Impregnation and Encapsulation -- 6.1 Introduction -- 6.2 Modeling of Mass Transfer -- 6.2.1 Example of Calculations for Osmotic Dehydration -- 6.3 Parameters Affecting the Osmotic Dehydration Process -- 6.4 Osmotic Dehydration Effect on Quality and Nutritional Properties -- 6.5 Developments in Osmotic Dehydration -- 6.5.1 Alternative Agents in the Osmotic Solutions -- 6.5.1.1 Alternative Carbohydrates as Osmotic Agents -- 6.5.2 Novel Hybrid Methods of Osmotic Dehydration: Application of Novel Treatments Combined with OD -- 6.5.3 Incorporation by Coatings and Emulsions -- 6.6 Conclusions -- References -- Chapter 7: Other Technologies for Encapsulation (Air Suspension Coating, Pan Coating, and Vacuum Drying) -- 7.1 Introduction -- 7.2 Air Suspension Coating (Fluidized Bed) -- 7.2.1 Air Suspension Coating Configurations -- 7.2.2 Process Variables -- 7.3 Pan Coating -- 7.3.1 Standard Pan System -- 7.3.2 Perforated Pan System -- 7.3.3 Process Variables -- 7.4 Vacuum Drying -- 7.4.1 Vacuum Dryers -- 7.4.1.1 Tumble and Agitated Vacuum Dryers -- 7.4.2 Process Variables -- References -- Chapter 8: Industry-Relevant Encapsulation Technologies for Food and Functional Food Production -- 8.1 Introduction -- 8.2 Spraying-Based Technologies -- 8.2.1 Spray Drying -- 8.2.2 Spray Cooling -- 8.2.3 Spray Coating -- 8.3 Dripping-Based Technologies -- 8.3.1 Electrostatic Extrusion -- 8.3.2 Extrusion with Coaxial Airflow, Vibrating Jet/Nozzle, Jet Cutting, and Spinning Disk Atomization -- 8.4 Emulsion-Based Technologies -- 8.5 Conclusion -- Acknowledgment -- References -- Index

Download or read book Heat and Mass Transfer in Drying of Porous Media written by Peng Xu and published by CRC Press. This book was released on 2019-07-16 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and Mass Transfer in Drying of Porous Media offers a comprehensive review of heat and mass transfer phenomena and mechanisms in drying of porous materials. It covers pore-scale and macro-scale models, includes various drying technologies, and discusses the drying dynamics of fibrous porous material, colloidal porous media and size-distributed particle system. Providing guidelines for mathematical modeling and design as well as optimization of drying of porous material, this reference offers useful information for researchers and students as well as engineers in drying technology, food processes, applied energy, mechanical, and chemical engineering.

Download or read book Bioactive Compounds written by Leila Queiroz Zepka and published by BoD – Books on Demand. This book was released on 2021-09-29 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioactive Compounds - Biosynthesis, Characterization, and Applications is an authoritative compilation of chapters on bioactive compounds with proven activities. It provides valuable information about biosynthesized active compounds that can be used for the further development of products in various industries. Chapters cover such topics as biosynthesis, characterization, separation, and purification, and applications of bioactive molecules. It describes and discusses bioresources of animal, vegetal, and microbial origin as potential sources of flavonoids, polysaccharides, sterols, polyphenols, amino acids, and others. This book provides insight into future developments in the field and, as such, is an essential resource for academicians, industrial researchers, and practitioners in biomolecules with biological activity. Key features: • Describes several classes of bioactive compounds and their associated activities • Highlights potential contributions of bioactive compounds as alternatives in the prevention and/or treatment of diseases • Contains information relevant to the development and use of new products

Download or read book Encapsulation Technologies for Active Food Ingredients and Food Processing written by N.J. Zuidam and published by Springer Science & Business Media. This book was released on 2009-10-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consumers prefer food products that are tasty, healthy, and convenient. Encapsulation is an important way to meet these demands by delivering food ingredients at the right time and right place. For example, encapsulates may allow flavor retention, mask bad tasting or bad smelling components, stabilize food ingredients, and increase their bioavailability. Encapsulation may also be used to immobilize cells or enzymes in the production of food materials or products, such as fermentation or metabolite production. This book provides a detailed overview of the encapsulation technologies available for use in food products, food processing, and food production. The book aims to inform those who work in academia or R&D about both the delivery of food compounds via encapsulation and food processing using immobilized cells or enzymes. The structure of the book is according to the use of encapsulates for a specific application. Emphasis is placed on strategy, since encapsulation technologies may change. Most chapters include application possibilities of the encapsulation technologies in specific food products or processes. The first part of the book reviews general technologies, food-grade materials, and characterization methods for encapsulates. The second part discusses encapsulates of active ingredients (e.g., aroma, fish oil, minerals, vitamins, peptides, proteins, probiotics) for specific food applications. The last part describes immobilization technologies of cells and enzymes for use within food fermentation processes (e.g., beer, wine, dairy, meat), and food production (e.g., sugar conversion, production of organic acids or amino acids, hydrolysis of triglycerides). Edited by two leading experts in the field, Encapsulation Technologies for Food Active Ingredients and Food Processing will be a valuable reference source for those working in the academia or food industry. The editors work in both industry or academia, and they have brought together in this book contributions from both fields.

Download or read book Non Thermal Technologies for the Food Industry written by C. Anandharamakrishnan and published by CRC Press. This book was released on 2024-02-29 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Depending on the mechanisms involved in non-thermal technologies (such as ozonization, irradiation, ultrasound processing, plasma processing, and advanced oxidative processes), interaction with food molecules differs, which might lead to desirable reactions. Non-Thermal Technologies for the Food Industry: Advances and Regulations explores the possibility of using non-thermal technologies for various purposes such as shelf-life extension, reduced energy consumption, adhesion, and safety improvement. Further, it reviews the present status of these technologies, international regulations, and sustainability aspects in food processing including global case studies. Features: Provides a comprehensive overview of all the non-thermal processing technologies that have potential for use within food manufacturing Covers novel disinfectant technologies and packaging methods for non-thermal processing Includes electro-spraying and electrospinning; low-temperature drying techniques, cold plasma techniques, hydrodynamic cavitation, oscillating magnetic field processing, and so forth Focus on topics such as the valorization of agri-food wastes and by-products and sustainability Reviews ClO2 in combined/hybrid technologies for food processing This book is aimed at researchers and graduate students in food and food process engineering.

Download or read book Handbook of Food Powders written by Bhesh Bhandari and published by Elsevier. This book was released on 2023-11-11 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Food Powders: Chemistry and Technology, Second Edition covers current developments in food powder technology, such as Microbial decontamination of food powders, Gas and oil encapsulated powders, and Plant-based protein powders among other important topics. Sections introduce processing and handling technologies for food powders, focus on powder properties, including surface composition, rehydration and techniques to analyze the particle size of food powders, and highlight specialty food powders such as dairy powders, fruit and vegetable powders and coating foods with powders. Edited by a team of international experts in the field, this book continues to be the only quality reference on food powder technology available for the audiences of professionals in the food powder production and handling industries. It is also ideal for development and quality control professionals in the food industry who use powders in foods, and for researchers, scientists and academics interested in the field. - Introduces six new chapters that incorporate the current developments in food powder technology - Examines powder properties, including surface composition, shelf life and techniques used to examine particle size - Focuses on specialty powders such as dairy, infant formulas, powdered egg, fruit and vegetable, and culinary and specialty products

Download or read book 3D Printing of Foods written by C. Anandharamakrishnan and published by John Wiley & Sons. This book was released on 2022-03-28 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing of Foods “p>Explore the fascinating realm of 3D food printing and its applications In 3D Printing of Foods, a team of distinguished researchers delivers a comprehensive and eye-opening exploration of the rapidly developing field of 3D food printing. In the book, the authors offer readers an examination of “food printability,” the foundation of 3D food printing. They discuss the enormous research gap in the subject that remains to be addressed and envisage a robust discipline in which food processing techniques, combined with 3D food printing, gives rise to a range of synergistic applications. In addition to treatments of safety challenges and research requirements, the book tackles food industry market trends and consumer preferences, as well as the globalization of printed foods and consumer perception of 3D printed foods. 3D Printing of Foods also explores the integration of electrohydrodynamic processes and encapsulation with 3D food printing. Readers will also find: Thorough introductions to 3D printing technology, 3D printing approaches, and food components and their printability In-depth examinations of the factors affecting the printability of foods, printability and techniques, and natively printable foods Practical discussions of pre-processing of non-printable foods and alternative ingredients used in food printing Comprehensive explorations of 4D printing technology and the applications of 3D food printing technology Perfect for 3D printing professionals and enthusiasts, as well as food scientists, 3D Printing of Foods is an indispensable resource for anyone interested in a one-stop resource addressing this cutting-edge technology with nearly limitless potential.

Download or read book Non Thermal Plasma Techniques for Pollution Control written by Bernie M. Penetrante and published by Springer. This book was released on 1993-12-20 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acid rain, global warming, ozone depletion, and smog are preeminent environmental problems facing the world today. Non-thermal plasma techniques offer an innovative approach to the solution of some of these problems. There are many types of non-thermal plasma devices that have been developed for environmental applications. The potential of these devices for the destruction of pollutants or toxic molecules has already been demonstrated in many contexts, such as nitrogen oxides (NOX) and sulfur dioxide (SO2) in flue gases, heavy metals and volatile organic compounds (VOCs) in industrial effluents, and chemical agents such as nerve gases. This book contains a comprehensive account of the latest developments in non-thermal plasma devices and their applications to the disposal of a wide variety of gaseous pollutants.

Download or read book Plant Antioxidants and Health written by Halina Maria Ekiert and published by Springer. This book was released on 2022-06-26 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive reference guide to plant-derived antioxidants, their beneficial effects, mechanisms of action, and role in disease prevention and improving general health (anti-ageing effect). The content is divided into three main parts, the first of which covers various antioxidants (such as polyphenols, carotenoids, tocopherols, tocotrienols, glutathione, ascorbic acid), their origins, plant biochemistry and industrial utilization. In turn, the book’s second, main part focuses on antioxidants’ beneficial health effects, explains biochemical fundamentals such as the free radical theory and oxidative stress, and discusses antioxidants’ role in e.g. cancer, cardiovascular diseases, inflammation, degenerative diseases and ageing. The third part reviews general laboratory methods for antioxidant screening, preservation and determination. Written by an international team of experts, this highly interdisciplinary book will benefit a broad range of health professionals and researchers working in biochemistry, biotechnology, nutrition, plant science and food chemistry. It offers an indispensable, up-to-date guide for anyone interested in antioxidants and the role of a plant-based diet in disease prevention and control