Download or read book Multiple valued Switching Theory written by Jon C. Muzio and published by CRC Press. This book was released on 1986 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essentially self-contained presentation of all the relevant techniques of multiple-valued analysis, this book will be of great value to undergraduates or postgraduate students of computer logic and design and all who need to master this subject. The entire range of techniques built up throughout the book is applied to a number of case studies, with emphasis placed firmly on the achievement of switching circuits to accomplish required tasks.
Download or read book Modern Uses of Multiple Valued Logic written by M. Dunn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of invited papers from the 1975 International Sym posium on Multiple-valued Logic. Also included is an extensive bib liography of works in the field of multiple-valued logic prior to 1975 - this supplements and extends an earlier bibliography of works prior to 1965, by Nicholas Rescher in his book Many-Valued Logic, McGraw-Hill, 1969. There are a number of possible reasons for interest in the present volume. First, the range of various uses covered in this collection of papers may be taken as indicative of a breadth which occurs in the field of multiple-valued logic as a whole - the papers here can do no more than cover a small sample: question-answering systems, analysis of computer hazards, algebraic structures relating to multiple-valued logic, algebra of computer programs, fuzzy sets. Second, a large part of the interest in such uses and applications has occurred in the last twenty, even ten years. It would be too much to expect this to be reflected in Rescher's 1969 book. Third, in the 1970's a series of annual symposia have been held on multiple-valued logic, which have brought much of this into a sharp focus. * The 1971 and 1972 symposia were held at the SUNY at Buffalo, the 1973 symposium at the Uni versity of Toronto, and the 1974 symposium at West Virginia Uni versity. Papers from these symposia are included in the bibliography which may be found in an appendix of this book.
Download or read book Multiple Valued Logic Design written by G Epstein and published by Routledge. This book was released on 2017-09-29 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiple-Valued Logic Design: An Introduction explains the theory and applications of this increasingly important subject. Written in a clear and understandable style, the author develops the material in a skillful way. Without using a huge mathematical apparatus, he introduces the subject in a general form that includes the well-known binary logic as a special case. The book is further enhanced by more 200 explanatory diagrams and circuits, hardware and software applications with supporting PASCAL programming, and comprehensive exercises with even-numbered answers for every chapter. Requiring introductory knowledge in Boolean algebra, 2-valued logic, or 2-valued switching theory, Multiple-Valued Logic Design: An Introduction is an ideal book for courses not only in logic design, but also in switching theory, nonclassical logic, and computer arithmetic. Computer scientists, mathematicians, and electronic engineers can also use the book as a basis for research into multiple-valued logic design.
Download or read book Computer Aided Systems Theory EUROCAST 2011 written by Roberto Moreno-Díaz and published by Springer Science & Business Media. This book was released on 2012-01-26 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume proceedings, LNCS 6927 and LNCS 6928, constitute the papers presented at the 13th International Conference on Computer Aided Systems Theory, EUROCAST 2011, held in February 2011 in Las Palmas de Gran Canaria, Spain. The total of 160 papers presented were carefully reviewed and selected for inclusion in the books. The contributions are organized in topical sections on concepts and formal tools; software applications; computation and simulation in modelling biological systems; intelligent information processing; heurist problem solving; computer aided systems optimization; model-based system design, simulation, and verification; computer vision and image processing; modelling and control of mechatronic systems; biomimetic software systems; computer-based methods for clinical and academic medicine; modeling and design of complex digital systems; mobile and autonomous transportation systems; traffic behaviour, modelling and optimization; mobile computing platforms and technologies; and engineering systems applications.
Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1995 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.
Download or read book Spectral Logic and Its Applications for the Design of Digital Devices written by Mark G. Karpovsky and published by John Wiley & Sons. This book was released on 2008-07-14 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectral techniques facilitate the design and testing of today's increasingly complex digital devices There is heightened interest in spectral techniques for the design of digital devices dictated by ever increasing demands on technology that often cannot be met by classical approaches. Spectral methods provide a uniform and consistent theoretic environment for recent achievements in this area, which appear divergent in many other approaches. Spectral Logic and Its Applications for the Design of Digital Devices gives readers a foundation for further exploration of abstract harmonic analysis over finite groups in the analysis, design, and testing of digital devices. After an introduction, this book provides the essential mathematical background for discussing spectral methods. It then delves into spectral logic and its applications, covering: * Walsh, Haar, arithmetic transform, Reed-Muller transform for binary-valued functions and Vilenkin-Chrestenson transform, generalized Haar, and other related transforms for multiple-valued functions * Polynomial expressions and decision diagram representations for switching and multiple-value functions * Spectral analysis of Boolean functions * Spectral synthesis and optimization of combinational and sequential devices * Spectral methods in analysis and synthesis of reliable devices * Spectral techniques for testing computer hardware This is the authoritative reference for computer science and engineering professionals and researchers with an interest in spectral methods of representing discrete functions and related applications in the design and testing of digital devices. It is also an excellent text for graduate students in courses covering spectral logic and its applications.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Peterson s Annual Guides to Graduate Study written by Peterson's Guides, inc and published by Peterson Nelnet Company. This book was released on 1976 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Logic Design of NanoICS written by Svetlana N. Yanushkevich and published by CRC Press. This book was released on 2017-12-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's engineers will confront the challenge of a new computing paradigm, relying on micro- and nanoscale devices. Logic Design of NanoICs builds a foundation for logic in nanodimensions and guides you in the design and analysis of nanoICs using CAD. The authors present data structures developed toward applications rather than a purely theoretical treatment. Requiring only basic logic and circuits background, Logic Design of NanoICs draws connections between traditional approaches to design and modern design in nanodimensions. The book begins with an introduction to the directions and basic methodology of logic design at the nanoscale, then proceeds to nanotechnologies and CAD, graphical representation of switching functions and networks, word-level and linear word-level data structures, 3-D topologies based on hypercubes, multilevel circuit design, and fault-tolerant computation in hypercube-like structures. The authors propose design solutions and techniques, going beyond the underlying technology to provide more applied knowledge. This design-oriented reference is written for engineers interested in developing the next generation of integrated circuitry, illustrating the discussion with approximately 250 figures and tables, 100 equations, 250 practical examples, and 100 problems. Each chapter concludes with a summary, references, and a suggested reading section.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault tolerant Computing Symposium written by and published by . This book was released on 1987 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Evolution of Fault Tolerant Computing written by A. Avizienis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the editors of this book, as well as for many other researchers in the area of fault-tolerant computing, Dr. William Caswell Carter is one of the key figures in the formation and development of this important field. We felt that the IFIP Working Group 10.4 at Baden, Austria, in June 1986, which coincided with an important step in Bill's career, was an appropriate occasion to honor Bill's contributions and achievements by organizing a one day "Symposium on the Evolution of Fault-Tolerant Computing" in the honor of William C. Carter. The Symposium, held on June 30, 1986, brought together a group of eminent scientists from all over the world to discuss the evolu tion, the state of the art, and the future perspectives of the field of fault-tolerant computing. Historic developments in academia and industry were presented by individuals who themselves have actively been involved in bringing them about. The Symposium proved to be a unique historic event and these Proceedings, which contain the final versions of the papers presented at Baden, are an authentic reference document.
Download or read book Fault Diagnosis and Fault Tolerance written by Tinghuai Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid growth of integration scale of VLSI chips and the present need for reliable computers in space exploration, fault diagnosis and fault toleran ce have become more important than before, and hence reveal a lot of interest ing topics which attract many researchers to make a great number of contribu tions to this field. In recent years, many new and significant results have been achieved. A quick scan over the proceedings of the conferences on fault tolerant computing and design automation as well as on testing will convince the reader of that. But unfortunately these achievements have not been entire ly reflected in the textbooks, so that there seems to be a gap for the new researcher who already has the basic knowledge and wants to begin research in this area. As a remedy for this deficiency, this book is intended for begin ners, especially graduate students, as a textbook which will lead them to the frontier of some branches of the fault-tolerant computing field. The first chapter introduces the four-valued logic B4 and its applica tions. In 1966 Roth first proposed this four-valued logic as a technique to generate tests for logical circuits, but this work did not concern the mathe matical basis of B4 itself.
Download or read book Journal of the Institution of Electronics and Telecommunication Engineers written by Institution of Electronics and Telecommunication Engineers (India) and published by . This book was released on 1980 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiple valued Logic in VLSI Design written by Jon T. Butler and published by . This book was released on 1991 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Computing written by Andrzej Pelc and published by Springer Science & Business Media. This book was released on 2007-09-07 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Symposium on Distributed Computing, DISC 2007, held in Lemesos, Cyprus, in September 2007. The 32 revised full papers, selected from 100 submissions, are presented together with abstracts of 3 invited papers and 9 brief announcements of ongoing works; all of them were carefully selected for inclusion in the book. The papers cover all current issues in distributed computing - theory, design, analysis, implementation, and application of distributed systems and networks - ranging from foundational and theoretical topics to algorithms and systems issues and to applications in various fields. This volume concludes with a section devoted to the 20th anniversary of the DISC conferences that took place during DISC 2006, held in Stockholm, Sweden, in September 2006
Download or read book Mathematical Reviews written by and published by . This book was released on 1994 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
