Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book Jet Engines written by Klaus Hünecke and published by Zenith Press. This book was released on 1997 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broaden your knowledge of jet engine technology and its associated subjects. This is a technically comprehensive study of the components that constitute a gas turbine aero-engine and examines each part's design and function in practice. Concentrates on turbojet, turboprop and turbofan designs, and is applicable to civilian and military usage. Contains an overview of the main design types and fundamentals, and looks at air intakes, compressors, turbines and exhaust systems in great detail.
Download or read book Jet Propulsion written by N. A. Cumpsty and published by Cambridge University Press. This book was released on 2003-08-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of Cumpsty's excellent self-contained introduction to the aerodynamic and thermodynamic design of modern civil and military jet engines. Through two engine design projects, first for a new large passenger aircraft, and second for a new fighter aircraft, the text introduces, illustrates and explains the important facets of modern engine design. Individual sections cover aircraft requirements and aerodynamics, principles of gas turbines and jet engines, elementary compressible fluid mechanics, bypass ratio selection, scaling and dimensional analysis, turbine and compressor design and characteristics, design optimization, and off-design performance. The book emphasises principles and ideas, with simplification and approximation used where this helps understanding. This edition has been thoroughly updated and revised, and includes a new appendix on noise control and an expanded treatment of combustion emissions. Suitable for student courses in aircraft propulsion, but also an invaluable reference for engineers in the engine and airframe industry.
Download or read book Theory of Aerospace Propulsion written by Pasquale M. Sforza and published by Butterworth-Heinemann. This book was released on 2016-08-13 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Aerospace Propulsion, Second Edition, teaches engineering students how to utilize the fundamental principles of fluid mechanics and thermodynamics to analyze aircraft engines, understand the common gas turbine aircraft propulsion systems, be able to determine the applicability of each, perform system studies of aircraft engine systems for specified flight conditions and preliminary aerothermal design of turbomachinery components, and conceive, analyze, and optimize competing preliminary designs for conventional and unconventional missions. This updated edition has been fully revised, with new content, new examples and problems, and improved illustrations to better facilitate learning of key concepts. - Includes broader coverage than that found in most other books, including coverage of propellers, nuclear rockets, and space propulsion to allows analysis and design of more types of propulsion systems - Provides in-depth, quantitative treatments of the components of jet propulsion engines, including the tools for evaluation and component matching for optimal system performance - Contains additional worked examples and progressively challenging end-of- chapter exercises that provide practice for analysis, preliminary design, and systems integration
Download or read book The Development of Jet and Turbine Aero Engines written by Bill Gunston and published by Patrick Stephens Limited. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using language understandable to those without an engineering background and avoiding complex mathematical formulae, Bill Gunston explains the differences between gas-turbine, jet, rocket, ramjet and helicopter turbo shaft aero engines and traces their histories from the early days through to today’s complex and powerful units as used in the latest wide-bodied airliners and high performance military jets.
Download or read book Jet Propulsion written by Nicholas Cumpsty and published by Cambridge University Press. This book was released on 2015-07-22 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the design of modern civil and military jet engines using engine design projects.
Download or read book Principles of Turbomachinery in Air Breathing Engines written by Erian A. Baskharone and published by Cambridge University Press. This book was released on 2006-07-31 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for advanced undergraduate and graduate students in mechanical and aerospace engineering taking a course commonly called Principles of Turbomachinery or Aerospace Propulsion. The book begins with a review of basic thermodynamics and fluid mechanics principles to motive their application to aerothermodynamics and real-life design issues. This approach is ideal for the reader who will face practical situations and design decisions in the gas turbine industry. The text is fully supported by over 200 figures, numerous examples, and homework problems.
Download or read book Fundamentals of Jet Propulsion with Applications written by Ronald D. Flack and published by Cambridge University Press. This book was released on 2005-04-25 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory 2005 text on air-breathing jet propulsion focuses on the basic operating principles of jet engines and gas turbines. Previous coursework in fluid mechanics and thermodynamics is elucidated and applied to help the student understand and predict the characteristics of engine components and various types of engines and power gas turbines. Numerous examples help the reader appreciate the methods and differing, representative physical parameters. A capstone chapter integrates the text material into a portion of the book devoted to system matching and analysis so that engine performance can be predicted for both on- and off-design conditions. The book is designed for advanced undergraduate and first-year graduate students in aerospace and mechanical engineering. A basic understanding of fluid dynamics and thermodynamics is presumed. Although aircraft propulsion is the focus, the material can also be used to study ground- and marine-based gas turbines and turbomachinery and some advanced topics in compressors and turbines.
Download or read book Aircraft Propulsion and Gas Turbine Engines written by Ahmed F. El-Sayed and published by CRC Press. This book was released on 2017-07-06 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Propulsion and Gas Turbine Engines, Second Edition builds upon the success of the book’s first edition, with the addition of three major topic areas: Piston Engines with integrated propeller coverage; Pump Technologies; and Rocket Propulsion. The rocket propulsion section extends the text’s coverage so that both Aerospace and Aeronautical topics can be studied and compared. Numerous updates have been made to reflect the latest advances in turbine engines, fuels, and combustion. The text is now divided into three parts, the first two devoted to air breathing engines, and the third covering non-air breathing or rocket engines.
Download or read book Ramjet Engines written by Mikhail Makarovich Bondari͡u︡k and published by . This book was released on 1969 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Theory of Turbulent Jets written by Genrikh Naumovich Abramovich and published by Mit Press. This book was released on 1963 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author's first monograph on turbulent jets, in 1936, dealt solely with a free submerged jet. Since that time, the theory of the turbulent jet has been developed in many published works both in the USSR and abroad: it has been enriched with a large amount of experimental material and has been applied in many new fields of engineering. In the last 10 years very substantial progress has been made, and it has now become possible to go beyond the free submerged jet and to solve the problem of a jet in a stream of fluid, to take into account the interaction between the jet and solid walls, to ascertain the relationship between the contour of the jet and the ratio of its density to the density of the surrounding medium, and to establish the characteristic features of a supersonic jet. This monograph contains the results of further research by the author and his colleagues, as well as a critical reappraisal of the more important theoretical and experimental data published by other investigators. The first section deals with the theory of a turbulent jet of incompressible fluid. It gives a systematic analysis of numerous experimental data on velocity profiles, temperature, and the impurity concentration, as well as the outlines of the turbulent mixing lone. The second section sets forth the theory of turbulent gas jets, including strongly preheated and supersonic jets. The theory of free turbulence in a gas, suitable in principle for any degree of compressibility, is revised, and the equations are derived for motion and heat exchange in the boundary layer of a jet at very high temperature. The third section solves several problems of the spreading of jets in finite and semifinite space, and the fourth section describes various applications of the theory of jets, many of which are reported for the first time or have been significantly revised.
Download or read book Fundamentals of Gas Turbines written by William W. Bathie and published by John Wiley & Sons. This book was released on 1996 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the fundamentals of the gas turbine engine, including cycles, components, component matching, and environmental considerations.
Download or read book Gas Turbine Theory written by G.F.C. Rogers and published by Pearson Higher Ed. This book was released on 2017-06-07 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the First Edition of this book was written in 1951, the gas turbine was just becoming established as a powerplant for military aircraft. It took another decade before the gas turbine was introduced to civil aircraft, and this market developed so rapidly that the passenger liner was rendered obsolete. Other markets like naval propulsion, pipeline compression and electrical power applications grew steadily. In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. The addition of a chapter devoted to the mechanical design of gas turbines greatly enhances the scope of the book. Descriptions of engine developments and current markets make this book useful to both students and practising engineers.
Download or read book Aircraft Propulsion written by Saeed Farokhi and published by John Wiley & Sons. This book was released on 2014-04-01 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: New edition of the successful textbook updated to include new material on UAVs, design guidelines in aircraft engine component systems and additional end of chapter problems Aircraft Propulsion, Second Edition follows the successful first edition textbook with comprehensive treatment of the subjects in airbreathing propulsion, from the basic principles to more advanced treatments in engine components and system integration. This new edition has been extensively updated to include a number of new and important topics. A chapter is now included on General Aviation and Uninhabited Aerial Vehicle (UAV) Propulsion Systems that includes a discussion on electric and hybrid propulsion. Propeller theory is added to the presentation of turboprop engines. A new section in cycle analysis treats Ultra-High Bypass (UHB) and Geared Turbofan engines. New material on drop-in biofuels and design for sustainability is added to refl ect the FAA’s 2025 Vision. In addition, the design guidelines in aircraft engine components are expanded to make the book user friendly for engine designers. Extensive review material and derivations are included to help the reader navigate through the subject with ease. Key features: General Aviation and UAV Propulsion Systems are presented in a new chapter Discusses Ultra-High Bypass and Geared Turbofan engines Presents alternative drop-in jet fuels Expands on engine components' design guidelines The end-of-chapter problem sets have been increased by nearly 50% and solutions are available on a companion website Presents a new section on engine performance testing and instrumentation Includes a new 10-Minute Quiz appendix (with 45 quizzes) that can be used as a continuous assessment and improvement tool in teaching/learning propulsion principles and concepts Includes a new appendix on Rules of Thumb and Trends in aircraft propulsion Aircraft Propulsion, Second Edition is a must-have textbook for graduate and undergraduate students, and is also an excellent source of information for researchers and practitioners in the aerospace and power industry.
Download or read book Jet Engine Mechanic AFSC 42652 Jet engine theory and maintenance information written by Ray M. Paddock and published by . This book was released on 1985 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Flight written by Richard von Mises and published by Courier Corporation. This book was released on 2012-04-27 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mises' classic avoids the formidable mathematical structure of fluid dynamics, while conveying — by often unorthodox methods — a full understanding of the physical phenomena and mathematical concepts of aeronautical engineering.
Download or read book Aircraft Propulsion Systems Technology and Design written by Gordon C. Oates and published by AIAA. This book was released on 1989 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
