Download or read book Theory of Electroelasticity written by Zhen-Bang Kuang and published by Springer Science & Business Media. This book was released on 2013-08-04 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Electroelasticity analyzes the stress, strain, electric field and electric displacement in electroelastic structures such as sensors, actuators and other smart materials and structures. This book also describes new theories such as the physical variational principle and the inertial entropy theory. It differs from the traditional method by using the physical variational principle to derive the governing equations of the piezoelectric material, whereas the Maxwell stress is obtained automatically. By using the inertial entropy theory, the temperature wave equation is obtained very easily. The book is intended for scientists, researchers and engineers in the areas of mechanics, physics, smart material and control engineering as well as mechanical, aeronautical and civil engineering, etc. Zhen-Bang Kuang is a professor at Shanghai Jiao Tong University.
Download or read book Nonlinear Theory of Electroelastic and Magnetoelastic Interactions written by Luis Dorfmann and published by Springer Science & Business Media. This book was released on 2014-02-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified theory on nonlinear electro-magnetomechanical interactions of soft materials capable of large elastic deformations. The authors include an overview of the basic principles of the classic theory of electromagnetism from the fundamental notions of point charges and magnetic dipoles through to distributions of charge and current in a non-deformable continuum, time-dependent electromagnetic fields and Maxwell’s equations. They summarize relevant theories of continuum mechanics, required to account for the deformability of material and present a constitutive framework for the nonlinear magneto-and electroelastic interactions in a highly deformable material. The equations contained in the book formulate and solve a variety of representative boundary-value problems for both nonlinear magnetoelasticity and electroelasticity.
Download or read book An Introduction to the Theory of Piezoelectricity written by Jiashi Yang and published by Springer Science & Business Media. This book was released on 2006-06-14 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on lecture notes for a graduate course that has been offered at University of Nebraska-Lincoln on and off since 1998. The course is intended to provide graduate students with the basic aspects of the continuum modeling of electroelastic interactions in solids. A concise treatment of linear, nonlinear, static and dynamic theories and problems is presented. The emphasis is on formulation and understanding of problems useful in device applications rather than solution techniques of mathematical problems. The mathematics used in the book is minimal. The book is suitable for a one-semester graduate course on electroelasticity. It can also be used as a reference for researchers. I would like to take this opportunity to thank UNL for a Maude Hammond Fling Faculty Research Fellowship in 2003 for the preparation of the first draft of this book. I also wish to thank Ms. Deborah Derrick of the College of Engineering and Technology at UNL for editing assistance with the book, and Professor David Y. Gao of Virginia Polytechnic Institute and State University for recommending this book to Kluwer for publication in the series of Advances in Mechanics and Mathematics. JSY Lincoln, Nebraska 2004 Preface Electroelastic materials exhibit electromechanical coupling. They experience mechanical deformations when placed in an electric field, and become electrically polarized under mechanical loads. Strictly speaking, piezoelectricity refers to linear electromechanical couplings only.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Constitutive Modelling of Solid Continua written by José Merodio and published by Springer Nature. This book was released on 2019-11-14 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of a collection of chapters by recognized experts to provide a comprehensive fundamental theoretical continuum treatment of constitutive laws used for modelling the mechanical and coupled-field properties of various types of solid materials. It covers the main types of solid material behaviour, including isotropic and anisotropic nonlinear elasticity, implicit theories, viscoelasticity, plasticity, electro- and magneto-mechanical interactions, growth, damage, thermomechanics, poroelasticity, composites and homogenization. The volume provides a general framework for research in a wide range of applications involving the deformation of solid materials. It will be of considerable benefit to both established and early career researchers concerned with fundamental theory in solid mechanics and its applications by collecting diverse material in a single volume. The readership ranges from beginning graduate students to senior researchers in academia and industry.
Download or read book The Theory of Piezoelectric Shells and Plates written by Nellya N. Rogacheva and published by CRC Press. This book was released on 2020-09-10 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book devoted to a systematic description of the linear theory of piezoelectric shells and plates theory. The book contains two parts. In the first part, the theories for electroelastic thin-walled elements of arbitrary form with different directions of preliminary polarization are presented in an easy form for practical use. The approximate methods for integrating the equations of piezoelectric shells and plates are developed and applied for solving some engineering problems. In the second part, the theory of piezoelectric shells and plates is substantiated by the asymptotic method. The area of applicability for different kinds of electroelastic shell theories is studied. A new problem concerning the electroelastic phenomena at the edge of a thin-walled element is raised and solved. The Theory of Piezoelectric Shells and Plates will be valuable to researchers working in the field of electroelasticity as well as to electrical and electronic engineers who use thin-walled piezoelements. It is also be helpful for students and post-graduates specializing in mechanics and for scientists concerning asymptotic methods.
Download or read book Material Inhomogeneities in Elasticity written by G.A. Maugin and published by CRC Press. This book was released on 2020-09-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self contained, this book presents a thorough introduction to the complementary notions of physical forces and material (or configurational) forces. All the required elements of continuum mechanics, deformation theory and differential geometry are also covered. This book will be a great help to many, whilst revealing to others a rather new facet of continuum mechanics in general, and elasticity in particular. An organized exposition of continuum mechanics on the material manifold is given which allows for the consideration of material inhomogeneities in their most appropriate framework. In such a frame the nonlinear elasticity of anisotropic inhomogenous materials appears to be a true field theory. Extensions to the cases of electroelasticity and magnetelasticity are then straightforward. In addition, this original approach provides systematic computational means for the evaluation of characteristic parameters which are useful in various branches of applied mechanics and mathematical physics. This is the case for path-independent integrals and energy-release rates in brittle fracture, the influence of electromagnetic fields on fracture criteria (such as in ceramics), the notion of momentum of electromagnetic fields in matter in optics, and the perturbation of solitons propagating in elastic dispersive systems.
Download or read book Mathematical Methods in Electro Magneto Elasticity written by Demosthenis I. Bardzokas and published by Springer Science & Business Media. This book was released on 2007-05-19 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of Coupled Fields is a discipline at the edge of modern research connecting Continuum Mechanics with Solid State Physics. This book fills many gaps in the theoretical literature which arise due to the complexity of the problem. A vast number of problems are considered so that the reader can get a clear quantitative and qualitative understanding of the phenomena taking place.
Download or read book Nonlinear Waves in Elastic Crystals written by Gérard A. Maugin and published by . This book was released on 1999 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mathematical modelling of changing structures in materials is of increasing importance to industry where applications of the theory are found in subjects as diverse as aerospace and medicine. This book deals with aspects of the nonlinear dynamics of deformable ordered solids (known as elastic crystals) where the nonlinear effects combine or compete with each other. Physical and mathematical models are discused and computational aspects are also included. Different models are considered - on discrete as well as continuum scales - applying heat, electricity, or magnetism to the crystal structure and these are analysed using the equations of rational mechanics. Students are introduced to the important equations of nonlinear science that describe shock waves, solitons and chaos and also the non-exactly integrable systems or partial differential equations. A large number of problems and examples are included, many taken from recent research and involving both one-dimensional and two-dimensional problems as well as some coupled degress of freedom.
Download or read book Fracture Mechanics of Piezoelectric Solids with Interface Cracks written by Volodymyr Govorukha and published by Springer. This book was released on 2017-03-14 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive study of cracks situated at the interface of two piezoelectric materials. It discusses different electric boundary conditions along the crack faces, in particular the cases of electrically permeable, impermeable, partially permeable, and conducting cracks. The book also elaborates on a new technique for the determination of electromechanical fields at the tips of interface cracks in finite sized piezoceramic bodies of arbitrary shape under different load types. It solves scientific problems of solid mechanics in connection with the investigation of electromechanical fields in piezoceramic bodies with interface cracks, and develops calculation models and solution methods for plane fracture mechanical problems for piecewise homogeneous piezoceramic bodies with cracks at the interfaces. It discusses the “open” crack model, which leads to a physically unrealistic oscillating singularity at the crack tips, and the contact zone model for in-plane straight interface cracks between two dissimilar piezoelectric materials. It also investigates the model of a crack with electro-mechanical pre-fracture zones. The formulated problems are reduced to problems of linear relationship, which correspond to different crack models, and their exact analytical solutions are found. The book presents in detail the expressions for stress and electric displacement intensity factors, as well as for the energy release rate. The influence of the electric permittivity of the crack, the mechanical load and the electric field upon the electro-elastic state, as well as the main fracture mechanical parameters, are analyzed and clearly illustrated. This book addresses postgraduate students, university teachers and researchers dealing with the problems of fracture mechanics of piezoelectric materials, as well as engineers who are active in the analysis of strength and durability of piezoelectric constructions.
Download or read book Mechanics of Electromagnetic Solids written by J.S. Yang and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of electromagnetic materials and structures has been developing rapidly with extensive applications in, e. g. , electronics industry, nuclear engineering, and smart materials and structures. Researchers in this interdisciplinary field are with diverse background and motivation. The Symposium on the Mechanics of Electromagnetic Materials and Structures of the Fourth International Conference on Nonlinear Mechanics in Shanghai, China in August 13-16, 2002 provided an opportunity for an intimate gathering of researchers and exchange of ideas. This volume contains papers based on most of the presentations at the symposium, and articles from a few invited contributors. These papers reflect some of the recent activities in the mechanics of electromagnetic materials and structures. The first twelve papers are in the order in which they were listed in the program of the conference. These are followed by six invited papers in alphabetical order of the last names of the first authors. We would like to extend our sincere thanks to Professor David Y. Gao of Virginia Tech for suggesting the symposium, and to the authors for their time and effort invested in preparing their manuscripts. We are also grateful to Professor Daining Fang of Tsinghua University for co-chairing the symposium with J. S. Yang. Our special thanks belong to Kluwer for preparing this book for publication. J. S. Yang G. A. Maugin PIEZOELECTRIC VIBRATORY GYROSCOPES J. S.
Download or read book Hygro Thermo Magneto Electro Elastic Theory of Anisotropic Doubly Curved Shells written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2023-10-13 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present in depth several Higher-order Shear Deformation Theories (HSDTs) by means of a unified approach for studying the Hygro-Thermo-Magneto-Electro- Elastic Theory of Anisotropic Doubly-Curved Shells. In particular, a general coupled multifield theory regarding anisotropic shell structures is provided. The three-dimensional multifield problem is reduced in a two-dimensional one following the principles of the Equivalent Single Layer (ESL) approach and the Equivalent Layer-Wise (ELW) approach, setting a proper configuration model. According to the adopted configuration assumptions, several Higher-order Shear Deformation Theories (HSDTs) are obtained. Furthermore, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. The approach presented in this volume is completely general and represents a valid tool to investigate the physical behavior of many arbitrarily shaped structures. An isogeometric mapping procedure is also illustrated to this aim. Special attention is given also to advanced and innovative constituents, such as Carbon Nanotubes (CNTs), Variable Angle Tow (VAT) composites and Functionally Graded Materials (FGMs). In addition, several numerical applications are used to support the theoretical models. Accurate, efficient and reliable numerical techniques able to approximate both derivatives and integrals are considered, which are respectively the Differential Quadrature (DQ) and Integral Quadrature (IQ) methods. The Theory of Composite Thin Shells is derived in a simple and intuitive manner from the theory of thick and moderately thick shells (First-order Shear Deformation Theory or Reissner- Mindlin Theory). In particular, the Kirchhoff-Love Theory and the Membrane Theory for composite shells are shown. Furthermore, the Theory of Composite Arches and Beams is also exposed. In particular, the equations of the Timoshenko Theory and the Euler-Bernoulli Theory are directly deducted from the equations of singly-curved shells of translation and of plates.
Download or read book Stochastic Elasticity written by L. Angela Mihai and published by Springer Nature. This book was released on 2022-09-01 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic elasticity is a fast developing field that combines nonlinear elasticity and stochastic theories in order to significantly improve model predictions by accounting for uncertainties in the mechanical responses of materials. However, in contrast to the tremendous development of computational methods for large-scale problems, which have been proposed and implemented extensively in recent years, at the fundamental level, there is very little understanding of the uncertainties in the behaviour of elastic materials under large strains. Based on the idea that every large-scale problem starts as a small-scale data problem, this book combines fundamental aspects of finite (large-strain) elasticity and probability theories, which are prerequisites for the quantification of uncertainties in the elastic responses of soft materials. The problems treated in this book are drawn from the analytical continuum mechanics literature and incorporate random variables as basic concepts along with mechanical stresses and strains. Such problems are interesting in their own right but they are also meant to inspire further thinking about how stochastic extensions can be formulated before they can be applied to more complex physical systems.
Download or read book Generalized Models and Non classical Approaches in Complex Materials 1 written by Holm Altenbach and published by Springer. This book was released on 2018-03-24 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of 2 special volumes dedicated to the memory of Gérard Maugin. Including 40 papers that reflect his vast field of scientific activity, the contributions discuss non-standard methods (generalized model) to demonstrate the wide range of subjects that were covered by this exceptional scientific leader. The topics range from micromechanical basics to engineering applications, focusing on new models and applications of well-known models to new problems. They include micro–macro aspects, computational endeavors, options for identifying constitutive equations, and old problems with incorrect or non-satisfying solutions based on the classical continua assumptions.
Download or read book Recent Developments in the Theory of Shells written by Holm Altenbach and published by Springer Nature. This book was released on 2019-09-25 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commemorates the 80th birthday of Prof. W. Pietraszkiewicz, a prominent specialist in the field of general shell theory. Reflecting Prof. Pietraszkiewicz’s focus, the respective papers address a range of current problems in the theory of shells. In addition, they present other structural mechanics problems involving dimension-reduced models. Lastly, several applications are discussed, including material models for such dimension-reduced structures.
Download or read book Selected Problems in the Elastodynamics of Piezoceramic Bodies written by Alexander Ya. Grigorenko and published by Springer Nature. This book was released on 2021-05-31 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various dynamic processes in non-uniform piezoceramic cylindrical and spherical bodies based on numerical methods. It discusses different variants of nonhomogeneous structural polarized piezoceramic materials in the shape of cylinders and spheres, and highlights the validation of the reliability of the results obtained by numerical calculations. The content is based on an outlined theory and methods of three-dimensional electroelasticity problems.
Download or read book Proceedings of the Eighth International Symposium on Continuum Models and Discrete Systems written by and published by World Scientific. This book was released on 1996 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
