Download or read book Buckling and Post Buckling Structures written by B. G. Falzon and published by Imperial College Press. This book was released on 2008 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth treatment of the study of the stability of engineering structures. Contributions from internationally recognized leaders in the field ensure a wide coverage of engineering disciplines in which structural stability is of importance, in particular the analytical and numerical modelling of structural stability applied to aeronautical, civil, marine and offshore structures. The results from a number of comprehensive experimental test programs are also presented, thus enhancing our understanding of stability phenomena as well as validating the analytical and computational solution schemes presented. A variety of structural materials are investigated with special emphasis on carbon-fibre composites, which are being increasingly utilized in weight-critical structures. Instabilities at the meso- and micro-scales are also discussed. This book will be particularly relevant to professional engineers, graduate students and researchers interested in structural stability.
Download or read book Buckling and Post Buckling written by Johann Arbocz and published by Springer. This book was released on 2014-03-12 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four lectures presented in this volume discuss recent ideas such as bifurcation, catastrophe and singular theory in elastic post-buckling but avoid advanced mathematics. The influence of imperfections and boundary conditions on the maximal load of stiffened shells of revolution is studied by numerical methods. Experimental methods to test compressed structures are presented and will serve as a useful guide for engineers and physicists. Also of practical importance is the thorough discussion of the state of the art in plastic buckling of plates and shells under the influence of the constitutive laws. The lectures are intended for postgraduate students, but at the same time they should serve as a review for researchers and engineers in solid mechanics.
Download or read book Buckling and Postbuckling of Beams Plates and Shells written by M. Reza Eslami and published by Springer. This book was released on 2017-11-03 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters treating the stability of all major areas of the flexural theory. It covers the stability of structures under mechanical and thermal loads and all areas of structural, loading and material types. The structural element may be assumed to be made of a homogeneous/isotropic material, or of a functionally graded material. Structures may experience the bifurcation phenomenon, or they may follow the postbuckling path. This volume explains all these aspects in detail. The book is self-contained and the necessary mathematical concepts and numerical methods are presented in such a way that the reader may easily follow the topics based on these basic tools. It is intended for people working or interested in areas of structural stability under mechanical and/or thermal loads. Some basic knowledge in classical mechanics and theory of elasticity is required.
Download or read book Advances in Applied Mechanics written by and published by Academic Press. This book was released on 1975-01-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Applied Mechanics
Download or read book Handbook of Thin Plate Buckling and Postbuckling written by Frederick Bloom and published by CRC Press. This book was released on 2000-12-21 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stop searching through the endless amount of literature to find the most recent information on plate buckling. The authors of Handbook of Thin Plate Buckling and Post Buckling have already done the work for you. Detailed and clearly written, the book contains a comprehensive, up-to-date treatment of the buckling and postbuckling behavior of perfect and imperfect thin plates. The authors study, in detail and with specific solved examples, the essential factors that influence critical buckling loads, initial mode shapes, and postbuckling behavior for thin plates. Through their analysis of rectangular, circular, and annular plates, they present valuable information, some of which has never before been published in book form. Such topics include hygrothermal buckling, viscoelastic and plastic buckling, and buckling of various thickness plates. With this important collection, the Handbook of Thin Plate Buckling and Post Buckling provides you with a one-stop source of current research findings.
Download or read book Static and Dynamic Buckling of Thin Walled Plate Structures written by Tomasz Kubiak and published by Springer Science & Business Media. This book was released on 2013-06-28 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph deals with buckling and postbuckling behavior of thin plates and thin-walled structures with flat wall subjected to static and dynamic load. The investigations are carried out in elastic range. The basic assumption here is the thin plate theory. This method is used to determination the buckling load and postbuckling analysis of thin-walled structures subjected to static and dynamic load. The book introduces two methods for static and dynamic buckling investigation which allow for a wider understanding of the phenomenon. Two different methods also can allow uncoupling of the phenomena occurring at the same time and attempt to estimate their impact on the final result. A general mathematical model, adopted in proposed analytical-numerical method, enables the consideration of all types of stability loss i.e.local, global and interactive forms of buckling. The applied numerical-numerical method includes adjacent of walls, shear-lag phenomenon and a deplanation of cross-sections.
Download or read book Buckling of Structures written by B. Budiansky and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the written texts of the papers presented at a Symposium on Buckling of Structures held at Harvard University in June 1974. This symposium, one of several on various topics sponsored annually by the International Union of Theoretical and Applied Me chanics (IUTAM), was organized by a Scientific Committee consisting of B. Budiansky (Chairman), A. H. Chilver, W. T. Koiter, and A. S. Vol' mir. Participation was by invitation of the Scientific Committee, and specific lecturers were invited to speak in the areas of experimental research, buckling and post-buckling calculations, post-buckling mode interaction, plasticity and creep effects, dynamic buckling, stochastic problems, and design. A total of 29 lectures were delivered, including a general opening lecture by Professor Koiter, and there were 93 reg istered participants from 16 different countries. Financial support for the symposium was provided by IUTAM, in the form of partial travel support for a number of participants, and also by the National Science Foundation, the National Aeronautics and Space Administration, and the Air Force Office of Scientific Re search, for additional travel support and administrative expenses. Meeting facilities and services were efficiently provided by the Science Center of Harvard University, and administrative support was gen erously provided by the Division of Engineering and Applied Physics of Harvard University. The scientific chairman enjoyed the invaluable assistance of his colleagues Professors J. W. Hutchinson and J. L.
Download or read book Stability of Structures written by Z. P. Ba?ant and published by World Scientific. This book was released on 2010 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial element of structural and continuum mechanics, stability theory has limitless applications in civil, mechanical, aerospace, naval and nuclear engineering. This text of unparalleled scope presents a comprehensive exposition of the principles and applications of stability analysis. It has been proven as a text for introductory courses and various advanced courses for graduate students. It is also prized as an exhaustive reference for engineers and researchers. The authors' focus on understanding of the basic principles rather than excessive detailed solutions, and their treatment of each subject proceed from simple examples to general concepts and rigorous formulations. All the results are derived using as simple mathematics as possible. Numerous examples are given and 700 exercise problems help in attaining a firm grasp of this central aspect of solid mechanics. The book is an unabridged republication of the 1991 edition by Oxford University Press and the 2003 edition by Dover, updated with 18 pages of end notes.
Download or read book Proceedings of the IUTAM Symposium on Finite Elasticity written by Donald E. Carlson and published by Springer. This book was released on 2011-12-08 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although finite elasticity theory has its roots in the nineteenth century, its development was largely neglected until the end of the Second World War. Since then it has attracted a substantial amount of attention and considerable progress has been made both in our understanding of the basis of the subject and in its applications. It occurred to me about three years ago that finite elasticity had reached a level of development at which an international symposium on the subject was overdue. Accordingly, with strong encouragement from Professor P. M. Naghdi and numerous other colleagues, I submitted to the International Union of Theoretical and Applied Mechanics a proposal for their support of such a symposium to be held at Lehigh University during the period August 10-15, 1980. The proposal received enthusiastic support from the International Union and an international scientific committee under my chairmanship, consisting of Professors G. Fichera (Rome), W. T. Koiter (Delft), L. I. Sedov (Moscow), and A. J. M. Spencer (Nottingham), was assigned responsibility for the scientific program. In constructing the program we aimed at as broad a coverage as possible of the many aspects of the subject on which significant progress is currently being made. These range from theoretical studies of existence and uniqueness of solutions of the governing equations of finite elasticity theory to experimental studies of its application to such problems as tear resistance and friction in vulcanized rubbers.
Download or read book Computerized buckling analysis of shells written by D. Bushnell and published by Springer Science & Business Media. This book was released on 1985-09-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the work performed by Lockheed Palo Alto Research Labora tory, Palo Alto, California 94304. The work was sponsored by Air Force Office of Scientific Research, Bolling AFB, Washington, D. C. under Grant F49620-77-C-0l22 and by the Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Wright-Patterson AFB, Ohio under Contract F3361S-76-C-31OS. The work was completed under Task 2307Nl, "Basic Research in Behavior of Metallic and Composite Components of Airframe Structures". The work was admini stered by Lt. Col. J. D. Morgan (AFOSR) and Dr. N. S. Khot (AFWAL/FIBRA). The contract work was performed between October 1977 and December 1980. The technical report was released by the Author in December 1981. Preface Many structures are assembled from parts which are thin. For example, a stiffened plate or cylindrical panel is composed of a sheet the thickness of which is small com pared to its length, breadth, and stiffener- spacing, and stiffeners the thickness of which is small compared to their _ heights and lengths. These assembled structures, loaded in compression, can buckle overall, that is sheet and stiffeners can collapse together in a general instability mode; the sheet can buckle locally between stiffeners; the stiffeners can cripple; and a variety of complex buckling interactions can occur involving local and overall deformations of both sheet and stiffeners. More complex, built-up structures can buckle in more complex and subtle ways.
Download or read book Buckling of Shells written by Ekkehard Ramm and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin shells are very popular structures in many different branches of engineering. There are the domes, water and cooling towers, the contain ments in civil engineering, the pressure vessels and pipes in mechanical and nuclear engineering, storage tanks and platform components in marine and offshore engineering, the car bodies in the automobile industry, planes, rockets and space structures in aeronautical engineering, to mention only a few examples of the broad spectrum of application. In addition there is the large applied mechanics group involved in all the computational and experimental work in this area. Thin shells are in a way optimal structures. They play the role of·the "primadonnas" among all kinds of structures. Their performance can be extraordinary, but they can also be very sensitive. The susceptibility to buckling is a typical example. David Bushnell says in his recent review paper entitled "Buckling of Shells - Pitfall for DeSigners": "To the layman buckling is a mysterious, perhaps even awe inspiring phenomenon that transforms objects originally imbued with symmetrical beauty into junk".
Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 2223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials).
Download or read book Phenomenological and Mathematical Modelling of Structural Instabilities written by Marcello Pignataro and published by Springer Science & Business Media. This book was released on 2007-07-15 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of structural instability plays a role of primary importance in the field of applied mechanics. Despite the remarkable progresses made in the recent past years, the structural instability remains one of the most challenging topics in applied - chanics. Many problems have bee:: solved in the last decades but still many others remain to be solved satisfactorily. The increasing number of papers published in jo- nals and conferences organized by ECCS, SSRC, IUTAM, and EUROMECH strongly indicates the interest of scientists and engineers in the subject. A careful examination of these publications shows that they tend to fall into one of the two categories. The first is that of practical design direction in which methods for analyzing specific stability problems related to some specific structural typologies are developed. The research works are restricted to determining the critical load, considering that it is sufficient to know the limits of stability range. These studies are invaluable since their aim is to provide solutions to practical problems, to supply the designer with data useful for design and prepare norms, specifications and codes. The second direction is that of theoretical studies, aiming at a mathematical modeling of the instability problems, for a better understanding of the phenomena. In these studies, special emphasis is placed on the behavior of structures after the loss of stability in the post-critical range. This approach is less familiar to designers as its results have not yet become part of current structural design practice.
Download or read book Structural Stability Theory and Practice written by Sukhvarsh Jerath and published by John Wiley & Sons. This book was released on 2020-12-08 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the theory of structural stability and its applications in crucial areas in engineering Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shells combines necessary information on structural stability into a single, comprehensive resource suitable for practicing engineers and students alike. Written in both US and SI units, this invaluable guide is perfect for readers within and outside of the US. Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shell offers: Detailed and patiently developed mathematical derivations and thorough explanations Energy methods that are incorporated throughout the chapters Connections between theory, design specifications and solutions The latest codes and standards from the American Institute of Steel Construction (AISC), Canadian Standards Association (CSA), Australian Standards (SAA), Structural Stability Research Council (SSRC), and Eurocode 3 Solved and unsolved practice-oriented problems in every chapter, with a solutions manual for unsolved problems included for instructors Ideal for practicing professionals in civil, mechanical, and aerospace engineering, as well as upper-level undergraduates and graduate students in structural engineering courses, Structural Stability Theory and Practice: Buckling of Columns, Beams, Plates, and Shell provides readers with detailed mathematical derivations along with thorough explanations and practical examples.
Download or read book Buckling and Postbuckling of Composite Plates written by G.J. Turvey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed by leading authorities in the field from around the world, this text provides a comprehensive insight into buckling and postbuckling. Basic theory, methods of buckling analysis and their application, the effect of external variables such as temperature and humidity on the buckling response and buckling tests are all covered.
Download or read book Nonlinear Problems of Elasticity written by Stuart Antman and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientists of the seventeenth and eighteenth centuries, led by Jas. Bernoulli and Euler, created a coherent theory of the mechanics of strings and rods undergoing planar deformations. They introduced the basic con cepts of strain, both extensional and flexural, of contact force with its com ponents of tension and shear force, and of contact couple. They extended Newton's Law of Motion for a mass point to a law valid for any deformable body. Euler formulated its independent and much subtler complement, the Angular Momentum Principle. (Euler also gave effective variational characterizations of the governing equations. ) These scientists breathed life into the theory by proposing, formulating, and solving the problems of the suspension bridge, the catenary, the velaria, the elastica, and the small transverse vibrations of an elastic string. (The level of difficulty of some of these problems is such that even today their descriptions are sel dom vouchsafed to undergraduates. The realization that such profound and beautiful results could be deduced by mathematical reasoning from fundamental physical principles furnished a significant contribution to the intellectual climate of the Age of Reason. ) At first, those who solved these problems did not distinguish between linear and nonlinear equations, and so were not intimidated by the latter. By the middle of the nineteenth century, Cauchy had constructed the basic framework of three-dimensional continuum mechanics on the founda tions built by his eighteenth-century predecessors.
Download or read book Handbook of Structural Stability written by George Gerard and published by . This book was released on 1959 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
