Download or read book Theory of Block Polymer Self Assembly written by Benjamin R. Magruder and published by American Chemical Society. This book was released on 2024-03-13 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This primer introduces the theory of self-assembly of block polymers, most notably self-consistent field theory (SCFT). Block polymer self-assembly is a fascinating and highly interdisciplinary topic. This primer can be read at several levels, depending on what readers want to get out of it. Readers who want an overview of self-assembly in block polymer and what SCFT says about the process can read Chapters 1-3 and skip to Chapter 7 to see the open questions. If the reader is further interested in the output of SCFT calculations but not how those outputs are generated, they should read Chapter 6 as well. But if the reader wants to learn how to do the SCFT calculations themselves, Chapters 4 and 5 offer an accessible introduction to the theory and numerical methods, providing an excellent entry point into the literature. This primer includes data that the authors have computed using SCFT. All calculations use the open-source software package Polymer Self-Consistent Field (PSCF), developed by David Morse at the University of Minnesota. Take breaks from reading to watch ten “Insider Q&A” videos included throughout, which offer additional insight from experts in the field, such as An-Chang Shi, Chinedum O. Osuji, Frank S. Bates, Christopher M. Bates, Glenn H. Fredrickson, and Lisa Hall. Furthermore, this primer includes multiple features to aid and enhance readers’ learning. “That’s a Wrap” summarizes key concepts at the end of each chapter, while “Read These Next” suggests references that may interest further reading. A pop-up glossary ensures readers have definitions as needed throughout the primer.

Download or read book Theoretical Studies of Equilibrium Structure Andlinear Response in Diblock Copolymer Melts written by Amit Ranjan and published by . This book was released on 2007 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Block Copolymers written by Nikos Hadjichristidis and published by John Wiley & Sons. This book was released on 2003-04-28 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers may be classified as either homopolymers, consisting of one single repeating unit, or copolymers, consisting of two or more distinct repeating units. Block copolymers contain long contiguous blocks of two or more repeating units in the same polymer chain. Covering one of the hottest topics in polymer chemistry, Block Copolymers provides a coherent overview of the synthetic routes, physical properties, and applications of block copolymers. This pioneering text provides not only a guideline for developing synthetic strategies for creating block copolymers with defined characteristics, but also a key to the relationship between the physical properties of block copolymers and the structure and dynamics of materials. Covering features of the chemistry and physics of block copolymers that are not found in comparable texts, Block Copolymers illustrates the structure-activity relationship of block copolymers and offers suggestions for the design of specific applications. Divided into five sections-Block Copolymers includes chapters on: * Block Copolymers by Chemical Modification of Precursor Polymers * Nonlinear Block Copolymers * Adsorption of Block Copolymers at Solid-Liquid Interfaces * Theory of Block Copolymer Segregation * Phase Transformation Kinetics * Block Copolymer Morphology * Block Copolymer Dynamics Polymer chemists, physicists, chemical engineers, and materials scientists, as well as graduate students in polymer science, will find Block Copolymers to be an invaluable text.

Download or read book Double Gyroid Structured Functional Materials written by Maik Rudolf Johann Scherer and published by Springer Science & Business Media. This book was released on 2013-06-25 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new high-tech applications and devices has created a seemingly insatiable demand for novel functional materials with enhanced and tailored properties. Such materials can be achieved by three-dimensional structuring on the nanoscale, giving rise to a significant enhancement of particular functional characteristics which stems from the ability to access both surface/interface and bulk properties. The highly ordered, bicontinuous double-gyroid morphology is a fascinating and particularly suitable 3D nanostructure for this purpose due to its highly accessible surface area, connectivity, narrow pore diameter distribution and superb structural stability. The presented study encompasses a wide range of modern nanotechnology techniques in a highly versatile bottom-up nanopatterning strategy that splits the fabrication process into two successive steps: the preparation of mesoporous double-gyroid templates utilizing diblock copolymer self-assembly, and their replication with a functional material employing electrochemical deposition and atomic layer deposition. The double-gyroid structured materials discussed include metals, metal oxides, and conjugated polymers, which are applied and characterized in high-performance devices, such as electrochromic displays, supercapacitors, chemical sensors and photovoltaics. This publication addresses a wide range of readers, from researchers and specialists who are professionally active in the field, to more general readers interested in chemistry, nanoscience and physics.

Download or read book Block Copolymer Nanocomposites written by Galder Kortaberria and published by CRC Press. This book was released on 2016-10-14 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the synthesis and characterization of nanocomposites based on block copolymers. Because of the self-assembly capability of block copolymers for the generation of nanostructures, besides their ability to nanostructure thermosetting matrices such as epoxy and polyester, binary or ternary nanocomposites can be prepared with different nanofillers such as nanoparticles and carbon nanotubes. The book starts with a review on nanocomposites based on block copolymers and nanoparticles synthesized with the use of surfactants, followed by a review on nanocomposites with metallic nanoparticles with polymer brushes and those with carbon nanotubes. A chapter is devoted to binary systems based on block copolymers and nanoparticles synthesized by sol-gel. A review on nanocomposites based on thermosetting matrices nanostructured with block copolymers (amphiphilic or chemically modified) is also presented for both epoxy and polyester resins. The work on ternary systems based on thermosetting matrices, block copolymers, and nanoparticles is presented next. The book concludes with a discussion on nanocomposites based on epoxy and block copolymers with azobenzene groups for optical purposes.

Download or read book Developments in Block Copolymer Science and Technology written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2004-07-16 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on recent advances in research on block copolymers, covering chemistry (synthesis), physics (phase behaviors, rheology, modeling), and applications (melts and solutions). Written by a team of internationally respected scientists from industry and academia, this text compiles and reviews the expanse of research that has taken place over the last five years into one accessible resource. Ian Hamley is the world-leading scientist in the field of block copolymer research Presents the recent advances in the area, covering chemistry, physics and applications. Provides a broad coverage from synthesis to fundamental physics through to applications Examines the potential of block copolymers in nanotechnology as self-assembling soft materials

Download or read book Amphiphilic Block Copolymers written by P. Alexandridis and published by Elsevier. This book was released on 2000-10-18 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the belief of the editors of this book that the recognition of block copolymers as being amphiphilic molecules and sharing common features with other well-studied amphiphiles will prove beneficial to both the surfactant and the polymer communities. An aim of this book is to bridge the two communities and cross-fertilise the different fields. To this end, leading researchers in the field of amphiphilic block copolymer self-assembly, some having a background in surfactant chemistry, and others with polymer physics roots, have agreed to join forces and contribute to this book.The book consists of four entities. The first part discusses theoretical considerations behind the block copolymer self-assembly in solution and in the melt. The second part provides case studies of self-assembly in different classes of block copolymers (e.g., polyethers, polyelectrolytes) and in different environments (e.g., in water, in non-aqueous solvents, or in the absence of solvents). The third part presents experimental tools, ranging from static (e.g., small angle neutron scattering) to dynamic (e.g., rheology), which can prove valuable in the characterization of block copolymer self-assemblies. The fourth part offers a sampling of current applications of block copolymers in, e.g., formulations, pharmaceutics, and separations, applications which are based on the unique self-assembly properties of block copolymers.

Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)

Download or read book Supramolecular Polymers written by Alberto Ciferri and published by CRC Press. This book was released on 2000-05-04 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Focuses on detailed analysis of the formation and properties of linear, planar, and three-dimensional polymer assemblies stabilized by superamolecular interactions, includes examples of covalently bonded polymers exhibiting novel supra-molecular effects. Clarifies the theoretical basis for the self-assembly of structures."

Download or read book Constitutional Dynamic Chemistry written by Mihail Barboiu and published by Springer Science & Business Media. This book was released on 2012-03-24 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutional Dynamic Chemistry: Bridge from Supramolecular Chemistry to Adaptive Chemistry, by Jean-Marie Lehn Multistate and Phase Change Selection in Constitutional Multivalent Systems, by Mihail Barboiu Dynamic Systemic Resolution, by Morakot Sakulsombat, Yan Zhang and Olof Ramström Dynamic Combinatorial Self-Replicating Systems, by Emilie Moulin and Nicolas Giuseppone DCC in the Development of Nucleic Acid Targeted and Nucleic Acid Inspired Structures, by Benjamin L. Miller Dynamic Nanoplatforms in Biosensor and Membrane Constitutional Systems, by Eugene Mahon, Teodor Aastrup und Mihail Barboiu Dynamic Assembly of Block-Copolymers, by D. Quémener, A. Deratani und S. Lecommandoux Dynamic Chemistry of Anion Recognition, by Radu Custelcean Supramolecular Naphthalenediimide Nanotubes, by Nandhini Ponnuswamy, Artur R. Stefankiewicz, Jeremy K. M. Sanders und G. Dan Pantoş Synthetic Molecular Machines and Polymer/Monomer Size Switches that Operate Through Dynamic and Non-Dynamic Covalent Changes, by Adrian-Mihail Stadler und Juan Ramírez Reversible Covalent Chemistries Compatible with the Principles of Constitutional Dynamic Chemistry: New Reactions to Create More Diversity, by Kamel Meguellati und Sylvain Ladame.

Download or read book Soft Matter Characterization written by Redouane Borsali and published by Springer Science & Business Media. This book was released on 2008-07-28 with total page 1490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2-volume set includes extensive discussions of scattering techniques (light, neutron and X-ray) and related fluctuation and grating techniques that are at the forefront of this field. Most of the scattering techniques are Fourier space techniques. Recent advances have seen the development of powerful direct imaging methods such as atomic force microscopy and scanning probe microscopy. In addition, techniques that can be used to manipulate soft matter on the nanometer scale are also in rapid development. These include the scanning probe microscopy technique mentioned above as well as optical and magnetic tweezers.

Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding

Download or read book Block Copolymers I written by Volker Abetz and published by Springer Science & Business Media. This book was released on 2005-12-02 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 N. Hadjichristidis, M. Pitsikalis, H. Iatrou: Synthesis of Block Copolymers.- 2 V. Abetz: Phase Behaviour and Morphologies of Block Copolymers.-

Download or read book Introduction to Polymers Third Edition written by Robert J. Young and published by CRC Press. This book was released on 2011-06-27 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated, Introduction to Polymers, Third Edition presents the science underpinning the synthesis, characterization and properties of polymers. The material has been completely reorganized and expanded to include important new topics and provide a coherent platform for teaching and learning the fundamental aspects of contemporary polymer science. New to the Third Edition Part I This first part covers newer developments in polymer synthesis, including ‘living’ radical polymerization, catalytic chain transfer and free-radical ring-opening polymerization, along with strategies for the synthesis of conducting polymers, dendrimers, hyperbranched polymers and block copolymers. Polymerization mechanisms have been made more explicit by showing electron movements. Part II In this part, the authors have added new topics on diffusion, solution behaviour of polyelectrolytes and field-flow fractionation methods. They also greatly expand coverage of spectroscopy, including UV visible, Raman, infrared, NMR and mass spectroscopy. In addition, the Flory–Huggins theory for polymer solutions and their phase separation is treated more rigorously. Part III A completely new, major topic in this section is multicomponent polymer systems. The book also incorporates new material on macromolecular dynamics and reptation, liquid crystalline polymers and thermal analysis. Many of the diagrams and micrographs have been updated to more clearly highlight features of polymer morphology. Part IV The last part of the book contains major new sections on polymer composites, such as nanocomposites, and electrical properties of polymers. Other new topics include effects of chain entanglements, swelling of elastomers, polymer fibres, impact behaviour and ductile fracture. Coverage of rubber-toughening of brittle plastics has also been revised and expanded. While this edition adds many new concepts, the philosophy of the book remains unchanged. Largely self-contained, the text fully derives most equations and cross-references topics between chapters where appropriate. Each chapter not only includes a list of further reading to help readers expand their knowledge of the subject but also provides problem sets to test understanding, particularly of numerical aspects.

Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.

Download or read book Journal of Rheology written by and published by . This book was released on 1999 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CRC Handbook of Thermodynamic Data of Polymer Solutions Three Volume Set written by Christian Wohlfarth and published by CRC Press. This book was released on 2018-10-03 with total page 1688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing valuable insight on physical behavior of polymer solutions, intermolecular interactions, and the molecular nature of mixtures, each volume in this one-of-a-kind handbook brings together reliable, easy-to-use entries, references, tables, examples, and appendices on experimental data from hundreds of primary journal articles, dissertations, and other published papers. This three-volume set presents hundreds of data sets including VLE/gas solubility isotherms, LLE and HPPE for polymer systems in supercritical fluids, as well as volumetric, enthalpic, and virial coefficient data sets, essential for handling industrial and laboratory processes involving all types of polymer systems.