Download or read book Theory and Design of Wood and Fiber Composite Materials written by Benjamin A. Jayne and published by Syracuse University Press. This book was released on 1972-08-01 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Theory and Design of Wood and Fiber Composite Materials Editor written by Benjamin A. Jayne and published by . This book was released on 1972 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Wood and Natural Fiber Composites written by Douglas D. Stokke and published by John Wiley & Sons. This book was released on 2013-10-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, there has been a shift in research and industrial practice, and products traditionally manufactured primarily from wood are increasingly combined with other nonwood materials of either natural or synthetic origin. Wood and other plant-based fiber is routinely combined with adhesives, polymers, and other "ingredients" to produce composite materials. Introduction to Wood and Natural Fiber Composites draws together widely scattered information concerning fundamental concepts and technical applications, essential to the manufacture of wood and natural fiber composites. The topics addressed include basic information on the chemical and physical composition of wood and other lignocellulosic materials, the behavior of these materials under thermocompression processes, fundamentals of adhesion, specific adhesive systems used to manufacture composite materials, and an overview of the industrial technologies used to manufacture major product categories. The book concludes with a chapter on the burgeoning field of natural fiber-plastic composites. Introduction to Wood and Natural Fiber Composites is a valuable resource for upper-level undergraduate students and graduate students studying forest products and wood science, as well as for practicing professionals working in operational areas of wood- and natural-fiber processing. For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs Topics covered include: Overview of lignocellulosic material, their chemical and physical composition Consolidation behavior of wood and fiber in response to heat and pressure Fundamentals of adhesion Adhesives used to bond wood and lignocellulosic composites Manufacturing technology of major product types Fiber/plastic composites
Download or read book THEORY AND DESIGN OF WOOL FIBER COMPOSITE MATERIALS written by ED JAYNE and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by John Wiley & Sons. This book was released on 2017-09-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and expanded coverage of the latest trends and developments in fiber composite materials, processes, and applications Analysis and Performance of Fiber Composites, Fourth Edition features updated and expanded coverage of all technical aspects of fiber composites, including the latest trends and developments in materials, manufacturing processes, and materials applications, as well as the latest experimental characterization methods. Fiber reinforced composite materials have become a fundamental part of modern product manufacturing. Routinely used in such high-tech fields as electronics, automobiles, aircraft, and space vehicles, they are also essential to everyday staples of modern life, such as containers, piping, and appliances. Little wonder, when one considers their ease of fabrication, outstanding mechanical properties, design versatility, light weight, corrosion and impact resistance, and excellent fatigue strength. This Fourth Edition of the classic reference—the standard text for composite materials courses, worldwide—offers an unrivalled review of such an important class of engineering materials. Still the most comprehensive, up-to-date treatment of the mechanics, materials, performance, analysis, fabrication, and characterization of fiber composite materials available, Analysis and Performance of Fiber Composites, Fourth Edition features: Expanded coverage of materials and manufacturing, with additional information on materials, processes, and material applications Updated and expanded information on experimental characterization methods—including many industry specific tests Discussions of damage identification techniques using nondestructive evaluation (NDE) Coverage of the influence of moisture on performance of polymer matrix composites, stress corrosion of glass fibers and glass reinforced plastics, and damage due to low-velocity impact New end-of-chapter problems and exercises with solutions found on an accompanying website Computer analysis of laminates No other reference provides such exhaustive coverage of fiber composites with such clarity and depth. Analysis and Performance of Fiber Composites, Fourth Edition is, without a doubt, an indispensable resource for practicing engineers, as well as students of mechanics, mechanical engineering, and aerospace engineering.
Download or read book The Theory of Composites written by Graeme W. Milton and published by SIAM. This book was released on 2022-12-07 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites have been studied for more than 150 years, and interest in their properties has been growing. This classic volume provides the foundations for understanding a broad range of composite properties, including electrical, magnetic, electromagnetic, elastic and viscoelastic, piezoelectric, thermal, fluid flow through porous materials, thermoelectric, pyroelectric, magnetoelectric, and conduction in the presence of a magnetic field (Hall effect). Exact solutions of the PDEs in model geometries provide one avenue of understanding composites; other avenues include microstructure-independent exact relations satisfied by effective moduli, for which the general theory is reviewed; approximation formulae for effective moduli; and series expansions for the fields and effective moduli that are the basis of numerical methods for computing these fields and moduli. The range of properties that composites can exhibit can be explored either through the model geometries or through microstructure-independent bounds on the properties. These bounds are obtained through variational principles, analytic methods, and Hilbert space approaches. Most interesting is when the properties of the composite are unlike those of the constituent materials, and there has been an explosion of interest in such composites, now known as metamaterials. The Theory of Composites surveys these aspects, among others, and complements the new body of literature that has emerged since the book was written. It remains relevant today by providing historical background, a compendium of numerous results, and through elucidating many of the tools still used today in the analysis of composite properties. This book is intended for applied mathematicians, physicists, and electrical and mechanical engineers. It will also be of interest to graduate students.
Download or read book Introduction to Design and Analysis with Advanced Composite Materials written by Stephen R. Swanson and published by . This book was released on 1997 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamentals while presenting more advanced topics, this introductory text, by presenting basic analytic and design principles, offers the knowledge required to effectively design structures, using advanced composite materials. It examines material forms, properties and manufacturing techniques.
Download or read book Composite Architecture written by Quang Truong and published by Birkhäuser. This book was released on 2021-01-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Daniel Gay and published by CRC Press. This book was released on 2014-07-29 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered to have contributed greatly to the pre-sizing of composite structures, Composite Materials: Design and Applications is a popular reference book for designers of heavily loaded composite parts. Fully updated to mirror the exponential growth and development of composites, this English-language Third Edition: Contains all-new coverage of nanocomposites and biocomposites Reflects the latest manufacturing processes and applications in the aerospace, automotive, naval, wind turbine, and sporting goods industries Provides a design method to define composite multilayered plates under loading, along with all numerical information needed for implementation Proposes original study of composite beams of any section shapes and thick-laminated composite plates, leading to technical formulations that are not found in the literature Features numerous examples of the pre-sizing of composite parts, processed from industrial cases and reworked to highlight key information Includes test cases for the validation of computer software using finite elements Consisting of three main parts, plus a fourth on applications, Composite Materials: Design and Applications, Third Edition features a technical level that rises in difficulty as the text progresses, yet each part still can be explored independently. While the heart of the book, devoted to the methodical pre-design of structural parts, retains its original character, the contents have been significantly rewritten, restructured, and expanded to better illustrate the types of challenges encountered in modern engineering practice.
Download or read book Design and Manufacture of Fibre Reinforced Composites written by Wayne Hall and published by Springer Nature. This book was released on 2021-08-05 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to the design and manufacture of fibre-reinforced composites. The mechanical properties of unidirectional composites are considered in a structural design context. The use of woven and random fibres is also addressed. The accuracy of design estimates for unidirectional composites is benchmarked against test data, and the relevance of a factor of safety (FoS) is established. The importance of prototype testing is emphasised. This book illustrates how to make a fibre-reinforced composite. Wet layup, vacuum bagging and prepreg moulding are covered in detail. Some guidance on mould design and construction is also provided. Finally, an introduction to the manufacture of composite tubes is presented. Wherever possible, design and make examples are used to illustrate the content. Tutorial questions and problems are included at the end of each chapter. The reader is encouraged to use these questions and problems to assess their own level of understanding of the content.
Download or read book Wood Polymer Composites written by K O Niska and published by Elsevier. This book was released on 2008-05-29 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-polymer composites (WPC) are materials in which wood is impregnated with monomers that are then polymerised in the wood to tailor the material for special applications. The resulting properties of these materials, from lightness and enhanced mechanical properties to greater sustainability, has meant a growing number of applications in such areas as building, construction and automotive engineering. This important book reviews the manufacture of wood-polymer composites, how their properties can be assessed and improved and their range of uses.After an introductory chapter, the book reviews key aspects of manufacture, including raw materials, manufacturing technologies and interactions between wood and synthetic polymers. Building on this foundation, the following group of chapters discusses mechanical and other properties such as durability, creep behaviour and processing performance. The book concludes by looking at orientated wood-polymer composites, wood-polymer composite foams, at ways of assessing performance and at the range of current and future applications.With its distinguished editors and international team of contributors, Wood-polymer composites is a valuable reference for all those using and studying these important materials. Provides a comprehensive survey of major new developments in wood-polymer composites Reviews the key aspects of manufacture, including raw materials and manufacturing technologies Discusses properties such as durability, creep behaviour and processing performance
Download or read book Sandwich Structural Composites written by Wenguang Ma and published by CRC Press. This book was released on 2021-12-15 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sandwich Structural Composites: Theory and Practice offers a comprehensive coverage of sandwich structural composites. It describes the structure, properties, characterization, and testing of raw materials. In addition, it discusses design and process methods, applications and damage assessments of sandwich structural composites. The book: Offers a review of current sandwich composite lamination processes and manufacturing methods Introduces raw materials, including core materials, skin reinforcements, resin substrates and adhesives Discusses sandwich structure characterization, finite element analysis of the structures, and product design and optimization Describes benefits other than structural, including acoustic, thermal, and fire Details applications in various industries, including aerospace, wind energy, marine ships, recreational boats and vehicles, sport equipment, building construction, and extreme temperature applications The book will be of benefit to industrial practitioners, researchers, academic faculty, and advanced students in materials and mechanical engineering and related disciplines looking to advance their understanding of these increasingly important materials.
Download or read book Natural Fiber Textile Composite Engineering written by Magdi El Messiry and published by CRC Press. This book was released on 2017-07-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Fiber Textile Composite Engineering sheds light on the area of the natural fiber textile composites with new research on their applications, the material used, the methods of preparation, the different types of polymers, the selection of raw materials, the elements of design the natural fiber textile polymer composites for a particular end use, their manufacturing techniques, and finally their life cycle assessments (LCA). The volume also addresses the important issue in the materials science of how to utilize natural fibers as an enhancement to composite materials. Natural fiber-reinforced polymer composites have been proven to provide a combination of superior mechanical property, dielectric property, and environmental advantages such as renewability and biodegradability. Natural fibers, some from agricultural waste products, can replace existing metallic and plastic parts and help to alleviate the environmental problem of increasing amounts of agriculture residual. The book is divided into four sections, covering: applications of natural fiber polymer composites design of natural fiber polymer composites composite manufacturing techniques and agriculture waste manufacturing composite material testing methods The first section of the book deals with the application of textile composites in the industry and the properties of the natural fibers, providing an understanding of the history of natural fiber composites as well as an analysis of the different properties of different natural fibers. The second section goes on to explain the textile composites, their classification, different composite manufacturing techniques, and the different pretreatment methods for the natural fibers to be used in composite formation. It also analyzes the composite material design under different types of loading and the mechanism of failure of the natural fiber composite. The effect of the fiber volume fraction of different textile structures is explained. The third section of the book, on composite manufacturing techniques and agriculture waste manufacturing, concerns the natural fiber composite manufacturing techniques, agricultural waste, and the methods of their preparation to be used successfully in the composite, either in the form of fibers particles or nanoparticles. The book then considers the testing methods of the different composite components as well as the final composite materials, giving the principle of the testing standards, either distractive or nondestructive. This book attempts to fill the gap between the role of the textile engineer and the role of the designer of composites from natural fibers. It provides important information on the application of textile composites for textile engineers, materials engineers, and researchers in the area of composite materials.
Download or read book Microstructural Design of Fiber Composites written by Tsu-Wei Chou and published by Cambridge University Press. This book was released on 2005-09-15 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the issue of designing the microstructure of fiber composite materials in order to obtain optimum performance. Besides the systematic treatment of conventional continuous and discontinuous fiber composites, the book also presents the state-of-the-art of the development of textile structural composites as well as the nonlinear elastic finite deformation theory of flexible composites. The author's experience during twenty years of research and teaching on composite materials is reflected in the broad spectrum of topics covered, including laminated composites, statistical strength theories of continuous fiber composites, short fiber composites, hybrid composites, two- and three-dimensional textile structural composites and flexible composites. This book provides the first comprehensive analysis and modeling of the thermo-mechanical behavior of fiber composites with these distinct microstructures. Overall, the inter-relationships among the processing, microstructures and properties of these materials are emphasized throughout the book. The book is intended as a text for graduate or advanced undergraduate students, but will also be an excellent reference for all materials scientists and engineers who are researching or working with these materials.
Download or read book Concurrent Conceptual Design and Materials Selection of Natural Fiber Composite Products written by Muhd Ridzuan Mansor and published by Springer. This book was released on 2017-10-25 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers topics related to developing natural-fiber composite products during the conceptual design stage in the product development process. It describes the concurrent engineering methods and tools applied in natural-fiber composite product development and discusses the major conceptual design activities, such as geometrical conceptual design development and selection, materials selection and manufacturing process selection. The book also includes case studies with illustrations on the related conceptual design aspects of developing natural-fiber composite products to provide designers with practical guidance on applying the selected tool for their project.
Download or read book Wood and Fiber written by and published by . This book was released on 1972 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
