Download or read book Applied Digital Control written by James R. Leigh and published by Prentice Hall. This book was released on 1985 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Direct Digital Control of Building Systems written by H. Michael Newman and published by John Wiley & Sons. This book was released on 1994 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: It emphasizes throughout the high performance, reliability, and reduced cost of modern digital sensors, control devices, microprocessors, computer memory, and other electronic components.
Download or read book Theory and Application of Digital Control written by A. K. Mahalanabis and published by Elsevier. This book was released on 2014-05-20 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Application of Digital Control contains the proceedings of the IFAC Symposium held at New Delhi, India on January 5-7, 1982. This book particularly presents the texts of the five plenary talks and the 110 papers of the symposium. This book organizes the papers into 109 chapters, with nearly one-third of the papers focus on digital control, particularly, software and hardware of control using microcomputers; computer-aided design; and adaptive control and modeling for digital control. Another set of papers deal with several applications of digital control techniques in solving interesting problems of socio economic systems, electrical power systems, bio systems, and artificial satellites. The reader will benefit hugely from the topics in this book that span several important theoretical and applied areas of the fast-changing topic of digital control.
Download or read book Digital Control Engineering written by M. Sami Fadali and published by Academic Press. This book was released on 2012-08-21 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) Inclusion of Advanced Topics In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems Minimal Mathematics Prerequisites The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more
Download or read book Digital Control Applications Illustrated with MATLAB written by Hemchandra Madhusudan Shertukde and published by CRC Press. This book was released on 2015-02-13 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Control Applications Illustrated with MATLAB covers the modeling, analysis, and design of linear discrete control systems. Illustrating all topics using the micro-computer implementation of digital controllers aided by MATLAB, Simulink, and FEEDBACK
Download or read book Microcontroller Based Applied Digital Control written by Dogan Ibrahim and published by Wiley. This book was released on 2006-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines the theory and the practice of applied digital control This book presents the theory and application of microcontroller based automatic control systems. Microcontrollers are single-chip computers which can be used to control real-time systems. Low-cost, single chip and easy to program, they have traditionally been programmed using the assembly language of the target processor. Recent developments in this field mean that it is now possible to program these devices using high-level languages such as BASIC, PASCAL, or C. As a result, very complex control algorithms can be developed and implemented on the microcontrollers. Presenting a detailed treatment of how microcontrollers can be programmed and used in digital control applications, this book: * Introduces the basic principles of the theory of digital control systems. * Provides several working examples of real working mechanical, electrical and fluid systems. * Covers the implementation of control algorithms using microcontrollers. * Examines the advantages and disadvantages of various realization techniques. * Describes the use of MATLAB in the analysis and design of control systems. * Explains the sampling process, z-transforms, and the time response of discrete-time systems in detail. Practising engineers in industry involved with the design and implementation of computer control systems will find Microcontroller Based Applied Digital Control an invaluable resource. In addition, researchers and students in control engineering and electrical engineering will find this book an excellent research tool.
Download or read book Digital Control Systems written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Download or read book Digital Control Systems theory Hardware Software written by Constantine H. Houpis and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1985 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Digital Control with Microcontrollers written by Cem Unsalan and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMBEDDED DIGITAL CONTROL WITH MICROCONTROLLERS Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control with Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller. The accomplished authors present the included information in three phases. First, they describe how to implement prototype digital control systems via the Python programming language in order to help the reader better understand theoretical digital control concepts. Second, the book offers readers direction on using the C programming language to implement digital control systems on actual microcontrollers. This will allow readers to solve real-life problems involving digital control, robotics, and mechatronics. Finally, readers will learn how to merge the theoretical and practical issues discussed in the book by implementing digital control systems in real-life applications. Throughout the book, the application of digital control systems using the Python programming language ensures the reader can apply the theory contained within. Readers will also benefit from the inclusion of: A thorough introduction to the hardware used in the book, including STM32 Nucleo Development Boards and motor drive expansion boards An exploration of the software used in the book, including Python, MicroPython, and Mbed Practical discussions of digital control basics, including discrete-time signals, discrete-time systems, linear and time-invariant systems, and constant coefficient difference equations An examination of how to represent a continuous-time system in digital form, including analog-to-digital conversion and digital-to-analog conversion Perfect for undergraduate students in electrical engineering, Embedded Digital Control with Microcontrollers will also earn a place in the libraries of professional engineers and hobbyists working on digital control and robotics systems seeking a one-stop reference for digital control systems on microcontrollers.
Download or read book Digital Control Using Digital Signal Processing written by Farzad Nekoogar and published by Prentice Hall PTR. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces digital control systems and demonstrates how to analyze and design these systems. It shows how to use DSPs to implement controllers designed with both classical frequency domain techniques and modem state variable methods. Computer-aided analysis and design tools, like MATLAB, are used throughout, and the basic mathematics of digital control systems are presented early, so users have the grounding they need to solve real-world problems. Classical design techniques for compensators are explained, as is the use of DSPs to implement compensator transfer functions. The book closes with a detailed look at modern state space techniques like pole placement state estimation; the optimal linear quadratic regulator; and a brief discussion of fuzzy logic design.
Download or read book Applied Digital Control written by J. R. Leigh and published by Courier Dover Publications. This book was released on 2006-06-23 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential core text, this volume develops theoretical foundations and explains how control systems work in real industrial situations. Several case histories assist students in visualizing applications. 1992 edition.
Download or read book Applications of Optimal Control Theory to Computer Controller Design written by William S. Widnall and published by MIT Press (MA). This book was released on 1968 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real Time Digital Control Applications written by A. Alonso-Concheiro and published by Elsevier. This book was released on 2014-05-23 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.
Download or read book Digital Control written by Richard J. Vaccaro and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is aimed at senior-level engineering students and can also used by graduate students and practising engineers whose experience has been limited to continuous-time theory and want to see how discrete-time systems are designed and/or have only seen classical design tools and want to learn modern state-space design. The increasing use of digital technology in control and signal processing increases the importance of analysis and synthesis tools for discrete-time sytems. The appropriate tool for studying state-space models of discrete-time systems is linear algebra. Although most students take a course in linear algebra, they are not usually exposed to advanced engineering applications in such a course. The material found in this text equips students to analyze and design discrete-time (digital) systems and shows how linear algebra and state-space system theory are used to design digital control systems.
Download or read book Digital Control Systems written by Benjamin C. Kuo and published by Oxford University Press on Demand. This book was released on 1995-06 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years significant progress has been made in the analysis and design of discrete-data and digital control systems. These systems have gained popularity and importance in industry due in part to the advances made in digital computers for controls and, more recently, in microprocessors and digital signal processors. An introductory text for a senior or graduate course on digital control systems, this text covers the theory and applications of digital control systems, assuming a knowledge of matrix algebra, differential equations, Laplace transforms and the basic principles of continuous-data control systems. Many subjects are new to the Second Edition, most importantly design topics such as disturbance rejection, sensitivity considerations, and zero-ripple deadbeat-response design. In addition, Kuo includes separate discussions on controllability, observability, and stability, expands the discussions of sampling period selection, emphasizes computer-aided solutions, and provides a new and simpler approach to the Nyquist criterion of stability. Each chapter begins with keywords and topics that provide students with an overview of the key topics to be covered. Illustrative examples, many derived from practical systems, are included throughout the text. Numerous exercise problems end each chapter.
Download or read book Applied Control Theory for Embedded Systems written by Tim Wescott and published by Elsevier. This book was released on 2011-03-31 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the majority of embedded control problems can be solved without resorting to heavy math and complicated control theory. However, existing texts on the subject are highly mathematical and theoretical and do not offer practical examples for embedded designers. This book is different;it presents mathematical background with sufficient rigor for an engineering text, but it concentrates on providing practical application examples that can be used to design working systems, without needing to fully understand the math and high-level theory operating behind the scenes. The author, an engineer with many years of experience in the application of control system theory to embedded designs, offers a concise presentation of the basics of control theory as it pertains to an embedded environment. Practical, down-to-earth guide teaches engineers to apply practical control theorems without needing to employ rigorous math Covers the latest concepts in control systems with embedded digital controllers
Download or read book Digital Power Electronics and Applications written by Fang Lin Luo and published by Elsevier. This book was released on 2010-07-20 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to describe the theory of Digital Power Electronics and its applications. The authors apply digital control theory to power electronics in a manner thoroughly different from the traditional, analog control scheme. In order to apply digital control theory to power electronics, the authors define a number of new parameters, including the energy factor, pumping energy, stored energy, time constant, and damping time constant. These parameters differ from traditional parameters such as the power factor, power transfer efficiency, ripple factor, and total harmonic distortion. These new parameters result in the definition of new mathematical modeling: • A zero-order-hold (ZOH) is used to simulate all AC/DC rectifiers. • A first-order-hold (FOH) is used to simulate all DC/AC inverters. • A second-order-hold (SOH) is used to simulate all DC/DC converters. • A first-order-hold (FOH) is used to simulate all AC/AC (AC/DC/AC) converters. Presents most up-to-date methods of analysis and control algorithms for developing power electronic converters and power switching circuits Provides an invaluable reference for engineers designing power converters, commercial power supplies, control systems for motor drives, active filters, etc. Presents methods of analysis not available in other books
