Download or read book Curves and Surfaces written by Jean-Daniel Boissonnat and published by Springer. This book was released on 2012-01-06 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the thoroughly refereed post-conference proceedings of the 7th International Conference on Curves and Surfaces, held in Avignon, in June 2010. The conference had the overall theme: "Representation and Approximation of Curves and Surfaces and Applications". The 39 revised full papers presented together with 9 invited talks were carefully reviewed and selected from 114 talks presented at the conference. The topics addressed by the papers range from mathematical foundations to practical implementation on modern graphics processing units and address a wide area of topics such as computer-aided geometric design, computer graphics and visualisation, computational geometry and topology, geometry processing, image and signal processing, interpolation and smoothing, scattered data processing and learning theory and subdivision, wavelets and multi-resolution methods.

Download or read book Handbook of Splines written by Gheorghe Micula and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a comprehensive introduction to the theory of spline functions, together with some applications to various fields, emphasizing the significance of the relationship between the general theory and its applications. At the same time, the goal of the book is also to provide new ma terial on spline function theory, as well as a fresh look at old results, being written for people interested in research, as well as for those who are interested in applications. The theory of spline functions and their applications is a relatively recent field of applied mathematics. In the last 50 years, spline function theory has undergone a won derful development with many new directions appearing during this time. This book has its origins in the wish to adequately describe this development from the notion of 'spline' introduced by 1. J. Schoenberg (1901-1990) in 1946, to the newest recent theories of 'spline wavelets' or 'spline fractals'. Isolated facts about the functions now called 'splines' can be found in the papers of L. Euler, A. Lebesgue, G. Birkhoff, J.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Analysis and Its Applications written by Svetozar Margenov and published by Springer Science & Business Media. This book was released on 2009-03-09 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 4th International Conference on Numerical Analysis and Its Applications, NAA 2008, held in Lozenetz, Bulgaria in June 2008. The 61 revised full papers presented together with 13 invited papers were carefully selected during two rounds of reviewing and improvement. The papers address all current aspects of numerical analysis and discuss a wide range of problems concerning recent achievements in physics, chemistry, engineering, and economics. A special focus is given to numerical approximation and computational geometry, numerical linear algebra and numerical solution of transcendental equations, numerical methods for differential equations, numerical modeling, and high performance scientific computing.

Download or read book Methods of Shape preserving Spline Approximation written by Boris I. Kvasov and published by World Scientific. This book was released on 2000 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to develop algorithms of shape-preserving spline approximation for curves/surfaces with automatic choice of the tension parameters. The resulting curves/surfaces retain geometric properties of the initial data, such as positivity, monotonicity, convexity, linear and planar sections. The main tools used are generalized tension splines and B-splines. A difference method for constructing tension splines is also developed which permits one to avoid the computation of hyperbolic functions and provides other computational advantages. The algorithms of monotonizing parametrization described improve an adequate representation of the resulting shape-preserving curves/surfaces. Detailed descriptions of algorithms are given, with a strong emphasis on their computer implementation. These algorithms can be applied to solve many problems in computer-aided geometric design.

Download or read book Advanced Topics In Multivariate Approximation Proceedings Of The International Workshop written by Fontanella F and published by World Scientific. This book was released on 1996-11-13 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of 24 refereed carefully edited papers on various topics in multivariate approximation. It represents the proceedings of a workshop organized by the University of Firenze, and held in September 1995 in Montecatini, Italy.The main themes of the volume are multiresolution analysis and wavelets, multidimensional interpolation and smoothing, and computer-aided geometric design. A number of particular topics are included, like subdivision algorithms, constrained approximation and shape-preserving algorithms, thin plate splines, radial basis functions, treatment of scattered data, rational surfaces and offsets, blossoming, grid generation, surface reconstruction, algebraic curves and surfaces, and neural networks.

Download or read book New Developments in Approximation Theory written by Manfred W. Müller and published by Springer. This book was released on 2012-12-06 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of papers by international contributors describing new developments in the fields of univariate and multivariate approximation theory. This research has applications in areas such as computer-aided geometric design, as applied in engineering and medical technology (e.g. computerized tomography).

Download or read book Mathematics and Computing written by Ram N. Mohapatra and published by Springer. This book was released on 2015-06-25 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses recent developments and contemporary research in mathematics, statistics and their applications in computing. All contributing authors are eminent academicians, scientists, researchers and scholars in their respective fields, hailing from around the world. This is the second conference on mathematics and computing organized at Haldia Institute of Technology, India. The conference has emerged as a powerful forum, offering researchers a venue to discuss, interact and collaborate, and stimulating the advancement of mathematics and its applications in computer science. The book will allow aspiring researchers to update their knowledge of cryptography, algebra, frame theory, optimizations, stochastic processes, compressive sensing, functional analysis, complex variables, etc. Educating future consumers, users, producers, developers and researchers in mathematics and computing is a challenging task and essential to the development of modern society. Hence, mathematics and its applications in computing are of vital importance to a broad range of communities, including mathematicians and computing professionals across different educational levels and disciplines. In current research, modeling and simulation, making decisions under uncertainty and pattern recognition have become very common. Professionals across different educational levels and disciplines need exposure to advances in mathematics and computing. In this context, this book presents research papers on applicable areas of current interest. It also includes papers in which experts summarize research findings, such as signal processing and analysis and low-rank-matrix approximation for solving large systems, which will emerge as powerful tools for further research. These new advances and cutting-edge research in the fields of mathematics and their applications to computing are of paramount importance for young researchers.

Download or read book Spline Functions Basic Theory written by Larry Schumaker and published by Cambridge University Press. This book was released on 2007-08-16 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic work continues to offer a comprehensive treatment of the theory of univariate and tensor-product splines. It will be of interest to researchers and students working in applied analysis, numerical analysis, computer science, and engineering. The material covered provides the reader with the necessary tools for understanding the many applications of splines in such diverse areas as approximation theory, computer-aided geometric design, curve and surface design and fitting, image processing, numerical solution of differential equations, and increasingly in business and the biosciences. This new edition includes a supplement outlining some of the major advances in the theory since 1981, and some 250 new references. It can be used as the main or supplementary text for courses in splines, approximation theory or numerical analysis.

Download or read book Computation of Curves and Surfaces written by Wolfgang Dahmen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assembled here is a collection of articles presented at a NATO ADVANCED STU DY INSTITUTE held at Puerto de la Cruz, Tenerife, Spain during the period of July 10th to 21st, 1989. In addition to the editors of these proceedings Professor Larry L. Schumaker from Vanderbilt University, Nashville, Tennessee, served as a member of the international organizing committee. The contents of the contribu tions fall within the heading of COMPUTATION OF CURVES AND SURFACES and therefore address mathematical and computational issues pertaining to the dis play, modeling, interrogation and representation of complex geometrical objects in various scientific and technical environments. As is the intent of the NATO ASI program the meeting was two weeks in length and the body of the scientific activities was organized around prominent experts. Each of them presented lectures on his current research activity. We were fortunate to have sixteen distinguished invited speakers representing nine NATO countries: W. Bohm (Federal Republic of Germany), C. de Boor (USA), C.K. Chui (USA), W. Dahmen (Federal Republic of Germany), F. Fontanella (Italy), M. Gasca (Spain), R. Goldman (Canada), T.N.T. Goodman (UK), J.A. Gregory (UK), C. Hoffman (USA), J. Hoschek (Federal Republic of Germany), A. Le Mehaute (France), T. Lyche (Norway), C.A. Micchelli (USA), 1.1. Schumaker (USA), C. Traas (The Netherlands). The audience consisted of both young researchers as well as established scientists from twelve NATO countries and several non-NATO countries.

Download or read book Mathematical Reviews written by and published by . This book was released on 2005 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multivariate Approximation From Cagd To Wavelets Proceedings Of The International Workshop written by Kurt Jetter and published by World Scientific. This book was released on 1993-11-30 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Fast Algorithms for Simultaneous Polynomial Approximation (G Baszenski & M Tasche)α-Spline of Smoothing for Correlated Errors in Dimension Two (M Bozzini & L Lenarduzzi)New Developments in the Theory of Radial Basis Function Interpolation (M D Buhmann)Realization of Neural Networks with One Hidden Layer (C K Chui & X Li)A General Method for Constrained Curves with Boundary Conditions (P Costantini)Sign-Regular and Totally Positive Matrices: An Algorithmic Approach (M Gasca & J M Peña)Some Results on Blossoming and Multivariate B-Splines (R Gormaz & P-J Laurent)Riesz Bounds in Scattered Data Interpolation and L2-Approximation (K Jetter)On Multivariate Hermite Polynomial Interpolation (A Le Méhauté)Quantitative Approximation Results for Sigma-Pi-Type Neural Network Operators (B Lenze)Local Interpolation Schemes — From Curves to Surfaces (D Levin)Some Results on Approximation by Smoothing Dm-Splines (M C L de Silanes) Readership: Applied mathematicians.

Download or read book Cam Design and Manufacturing Handbook written by Robert L. Norton and published by Industrial Press Inc.. This book was released on 2002 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable resource brings together up-to-date CAM design technology, correct design and manufacturing procedures, and recent CAM research results in one volume that is indispensable to the design and manufacturing of CAM-follower systems. Includes a 90-day trial demonstration copy of the Professional Version of Dynacam for Windows V.7.0.

Download or read book Interactive Curve Modeling written by Muhammad Sarfraz and published by Springer Science & Business Media. This book was released on 2007-10-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers Curve Modeling with solutions to real life problems relating to Computer Graphics, Vision, Image Processing, Geometric Modeling and CAD/CAM. Chapters deal with basic concepts, curve design techniques and their use to various applications and a wide range of problems with their automated solutions through computers. The book provides an invaluable resource which focuses on interdisciplinary methods and affiliates up-to-date methodologies. It aims to stimulate provide a source where the reader can find the latest developments in the field including a variety of techniques, applications, and systems necessary for solving real life problems.

Download or read book CAD CAM Theory and Practice written by Ibrahim Zeid and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1991 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides coverage of the theory and practice of CAD/CAM for higher level courses in the subject. It is independent of any particular CAD/CAM system, covering CAD/CAM principles and tools in generic and basic forms. Balancing theory and practice, the book's emphasis on design and engineering applications provides students with examples of the use of CAD/CAM concepts. Each chapter contains a set of problems.

Download or read book Contouring written by Debbie Watson and published by Elsevier. This book was released on 2013-10-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is the key to computer contouring, exploring in detail the practice and principles using a personal computer. Contouring allows a three dimensional view in two dimensions and is a fundamental technique to represent spatial data. All aspects of this type of representation are covered including data preparation, selecting contour intervals, interpolation and griding, computing volumes and output and display. Formulated for both the novice and the experienced user, this book initially conducts the reader through a step by step explanation of PC software and its application to personal data, and then presents the rationale and concepts for contouring using the computer. Accompanying the book is a set of BASIC programs, in ASCII format, on an MS-DOS 360KB floppy disk. These programs implement eighteen interpolation methods, five gradient estimation techniques, and seven types of display, and are designed to be adapted or combined to suit a wide range of possible objectives concerning either the comparative study of contouring methodology or the practical production of contour displays.