Download or read book Interfaces in Composites written by and published by ASTM International. This book was released on 1969 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical Studies of the Mechanics of the Fiber Matrix Interface in Composites written by L. B. Greszczuk and published by . This book was released on 1969 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper treats the development of pertinent theories that establish the properties of the fiber-matrix interface needed to achieve efficient composites and the development of a test technique to measure these properties. An equation is derived that relates the externally applied load to the failure mode, fiber tensile strength, and interface shear strength. This equation makes it possible to establish the interface strength that is required to obtain overall composite failure instead of interface failure. The effect of interface on the bending stiffness and Young's modulus of filamentary composites is investigated. A technique, based on shear-lag theory, that will measure the properties of the interface is presented. This technique involves pullout tests on fibers that are imbedded in a matrix. An approximate solution also is presented for the shear-stress distribution around a discontinuous fiber that is surrounded by six continuous fibers. The seven fibers are a part of a composite of infinite extent that is subjected to a remotely applied tensile stress. It is shown that there is a significant variation in the shear-stress distribution along the fiber length as well as around its circumference.
Download or read book Engineered Interfaces in Fiber Reinforced Composites written by Jang-Kyo Kim and published by Elsevier. This book was released on 1998-10-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces. The book contains eight chapters of discussions on microstructure-property relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intralaminar strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stability during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.
Download or read book Fracture Mechanics written by Fazil Erdogan and published by ASTM International. This book was released on 1995 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Load Transfer at the Fiber matrix Interface written by Christos C. Chamis and published by . This book was released on 1972 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods for measuring and predicting interface bond stresses and interface bond strength are described. Geometric and material variables which influence interface stress and interface bond strength are identified. The dependence of composite fracture surface characteristics on bond strength is illustrated. Parameters for selecting constituents to yield specified interface bond strength are recommended.
Download or read book Micromechanics of Fiber Matrix Interface and Fracture of Advanced Composites with Engineered Interfaces written by J-K Kim and published by . This book was released on 1995 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental method is presented to achieve high strength and high fracture toughness of polymer matrix composites by means of an organic interlayer between fiber and matrix. Extensive mechanical tests and chemical/morphological analyses are performed with a special emphasis being placed on the fiber-matrix interface to characterize the interfacial bonding and the corresponding failure mechanisms taking place in the composite during fracture. To support the observed experimental results, also presented is a parametric theoretical study based on thermo-mechanics and finite element analyses of the single fiber cylindrical composite model whereby important roles of the interlayer are evaluated in controlling the stress transfer, debonding process and the generation of thermal residual stresses. In light of the foregoing study, three concepts of engineered interface are proposed and their practical implications discussed. They include weak interface-bond layer, microductile/compliant layer and compensating layer.
Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers
Download or read book Fiber Matrix and Interface Properties written by Christopher J. Spragg and published by ASTM International. This book was released on 1996 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing fiber-matrix adhesion and its characterization in composite materials, reports results from applying the most commonly used test methods, such as fragmentation, pull-out, and indentation, to high-performance composites and their constituents. The 13 papers were presented at a symposium i
Download or read book Interfaces in Polymer Matrix Composites written by Edwin P. Plueddemann and published by Elsevier. This book was released on 2016-06-03 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials, Volume 6: Interfaces in Polymer Matrix Composites covers the interface region as deduced from extensive practical studies of composite properties and from scientific studies of surfaces and surface modifiers. The book starts by providing a historical background on the studies and theories of the interface. The text then discusses the mechanics of load transfer at the interface; the surface chemistry of moisture-induced composite failure; and radioisotope studies of coupling agents at the interface. The use of silane coupling agents in particulate mineral filled composites; the mechanism of adhesion through silane coupling agents; as well as the high-modulus fibers and the fiber-resin interface in resin composites are also considered. Materials scientists, materials engineers, and design engineers will find the book invaluable.
Download or read book Mechanics of Geomaterial Interfaces written by A.P.S. Selvadurai and published by Elsevier. This book was released on 1995-01-30 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of geomaterial interfaces recognizes the important influences of the interface behaviour on the performance of interfaces involving cementaceous materials such as concrete and steel, ice-structure interfaces, concrete-rock interfaces and interfaces encountered in soil reinforcement. During the past two decades, the subject of geomaterial interfaces has attracted the concerted attention of scientists and engineers both in geomechanics and applied mechanics. These efforts have been largely due to the observation that the conventional idealizations of the behaviour of interfaces between materials by frictionless contact, bonded contact, Coulomb friction or finite friction tend to omit many interesting and important influences of special relevance to geomaterials. The significant manner in which non-linear effects, dilatancy, contact degradation, hardening and softening, etc., can influence the behaviour of the interface is borne out by experimental evidence. As a result, in many instances, the response of the interface can be the governing criterion in the performance of a geomechanics problem. The primary objective of this volume is to provide a documentation of recent advances in the area of geomaterial interfaces. The volume consists of subject groupings which cover ice-structure, soil-structure and steel-concrete interfaces, mechanics of rock and concrete joints and interfaces in discrete systems.
Download or read book Numerical Analysis and Modelling of Composite Materials written by J.W. Bull and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are increasingly used in many applications because they offer the engineer a range of advantages over traditional materials. They are often used in situations where a specified level of performance is required, but where the cost of testing the materials under the extremes of those specifications is very high. In order to solve this problem, engineers are turning to computer Modelling to evaluate the materials under the range of conditions they are likely to encounter. Many of these analyses are carried out in isolation, and yet the evaluation of a range of composites can be carried out using the same basic principles. In this new book the editor has brought together an international panel of authors, each of whom is working on the analysis and Modelling of composite materials. The overage of the book is deliberately wide; to illustrate that similar principles and methods can be used to model and evaluate a wide range of materials. It is also hoped that, by bringing together this range of topics, the insight gained in the study of one composite can be recognized and utilized in the study of others. Professional engineers involved in the specification and testing of composite material structures will find this book an invaluable resource in the course of their work. It will also be of interest to those industrial and academic engineers involved in the design, development, manufacture and applications of composite materials.
Download or read book Damage and Interfacial Debonding in Composites written by D.H. Allen and published by Elsevier. This book was released on 1996-07-18 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading authorities in the field of damage and micromechanics of composites, this book deals mainly with the damage impaired in composites due to different types of loading. It examines the different types of damage in composites in the fiber, matrix, debonding and delamination. It also reviews the theoretical characterization of damage, its experimental determination as well as the numerical simulation of damage.
Download or read book Mechanics of Composite Materials and Structures written by Carlos A. Mota Soares and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compact presentation of the foundations, current state of the art, recent developments and research directions of all essential techniques related to the mechanics of composite materials and structures. Special emphasis is placed on classic and recently developed theories of composite laminated beams, plates and shells, micromechanics, impact and damage analysis, mechanics of textile structural composites, high strain rate testing and non-destructive testing of composite materials and structures. Topics of growing importance are addressed, such as: numerical methods and optimisation, identification and damage monitoring. The latest results are presented on the art of modelling smart composites, optimal design with advanced materials, and industrial applications. Each section of the book is written by internationally recognised experts who have dedicated most of their research work to a particular field. Readership: Postgraduate students, researchers and engineers in the field of composites. Undergraduate students will benefit from the treatment of the foundations of the mechanics of composite materials and structures.
Download or read book Composites Science Technology and Engineering written by Frank R. Jones and published by Cambridge University Press. This book was released on 2022-04-21 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand critical principles of composites with this interdisciplinary text. Covering such topics as design of durable structures, choice of fibre, matrix, manufacturing process and mechanics, it is an essential guide for scientists and engineers wishing to discover the benefits of composite materials for designing strong and durable structures.
Download or read book Interfaces in Metal Matrix Composites written by Arthur G. Metcalfe and published by Elsevier. This book was released on 2016-06-15 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces in Metal Matrix Composites, Volume 1 presents the position of the science of interfaces, as well as the necessary background for the effort in progress to apply these materials. The book discusses the mechanical and physical aspects of the interface; the effect of the interface on longitudinal tensile properties; and the effect of the filament-matrix interface on off-axis tensile strength. The text also describes the role of the interface on elastic-plastic composite behavior; the effect of interface on fracture; and the interfaces in oxide reinforced metals and in directionally solidified eutectics. The effect of impurity on reinforcement-matrix compatibility is also considered. Metallurgical engineers and people involved in the study of materials science will find the book invaluable.
Download or read book 20th Annual Conference on Composites Advanced Ceramics Materials and Structures B Volume 17 Issue 4 written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
