Download or read book Theoretical and Experimental Investigations on Sintering Kinetics of Silica Nanoparticles written by Hans Joachim Schmid and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Science and Technology of Sintering written by Biljana D. Stojanovic and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled Advanced Science and Technology of Sintering, contains the edited Proceedings of the Ninth World Round Table Conference on Sintering (IX WRTCS), held in Belgrade, Yugoslavia, September 1-4 1998. The gathering was one in a series of World Round Table Conferences on Sintering organised every four years by the Serbian Academy of Sciences and Arts (SASA) and the International Institute for the Science of Sintering (IISS). The World Round Table Conferences on Sintering have been traditionally held in Yugoslavia. The first meeting was organised in Herceg Novi in 1969 and since then they have regularly gathered the scientific elite in the science of sintering. It is not by chance that, at these conferences, G. C. Kuczynski, G. V. Samsonov, R. Coble, Ya. E. Geguzin and other great names in this branch of science presented their latest results making great qualitative leaps in the its development. Belgrade hosted this conference for the first time. It was chosen as a reminder that 30 years ago it was the place where the International Team for Sintering was formed, further growing into the International Institute for the Science of Sintering. The IX WRTCS lasted four days. It included 156 participants from 17 countries who presented the results of their theoretical and experimental research in 130 papers in the form of plenary lectures, oral presentations and poster sections.
Download or read book Gas phase Synthesis of Silica Nanoparticles Reaction Kinetics Synthesis and Characterization written by Ali Abdali and published by Cuvillier Verlag. This book was released on 2014-04-25 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gas-phase kinetics of the decomposition of tetraethoxysilane (TEOS) and hexamethyldisiloxane (HMDSO) and the formation and growth of silica nanoparticles were studied. The kinetics study was carried out in shock-heated gases with species measurements by high-repetition-rate time-of-flight mass spectrometry. The mass spectra indicate the formation of Si(OH)4 from the decomposition of TEOS while during HMDSO decomposition several Silicon-containing species were found, such as Si atoms, SiO and SiCH3. The ignition-delay time of the precursors in oxygen-containing bath gases was studied by observing the OH* emission signal behind the reflected shock wave. The ignition delay times of TEOS and HMDSO are strongly temperature dependent and the Arrhenius parameters were determined. Silica-particle formation and growth from TEOS and HMDSO were investigated in a hybrid microwave-plasma hot-wall reactor and a low-pressure premixed H2/O2/Ar flame reactor by in-situ and ex-situ measurements. Particle sizes distributions were determined by particle mass spectrometry and the spatial gas-phase temperature distribution was measured with multi-line NO-LIF thermometry. The present research work provides data and new understanding of TEOS and HMDSO decomposition kinetics and particle formation and growth of silica nanoparticles in the gas-phase. These data can be used as input for computational fluid dynamics simulations and hence for the design of reactors for the gas-phase synthesis of highly specific nanoparticles.
Download or read book Sintering written by Ricardo Castro and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering process studies have re-emerged strongly in the past decade due to extensive discussions about the stabilization of nanoparticles and nanostructures, and the development of controlled nanograined bulk materials. This book presents the state-of-art in experiments and theory of novel sintering processes, traditional sintering and grain growth. The scope ranges from powder metallurgy to ceramic and composites processing. The challenges of conventional and novel sintering and grain growth in nanopowders and nanostructures are addressed, being useful for students as well as professionals interested in sintering at the nanoscale.
Download or read book Sintering Technology written by Randall M. German and published by CRC Press. This book was released on 2020-09-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the sintering conference held at the Pennsylvania State University, USA, this text presents advances in the application of sintering to the most important industrial materials. It offers results on both solid-state and microphase sintering as well as microstructure evolution, and introduces new applications, processes, materials and solutions to technical problems.
Download or read book Sintering Key Papers written by S. Somiya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th International Symposium on the Science and Technology of Sintering was held on 4-6 November 1987 in Tokyo. Among the many technical sessions was one entitled 'Session for Sintering-Case Study'. Over 200 participants heard these invited talks. Although some papers were over 20 years old, it is necessary to understand the authors' way of thinking. Since the end of the Second World War, many excellent papers related to sintering have appeared in many different academic journals. Some of these papers are still of value, and are still being read by today's students. The questions we have to ask are: Why does the scholar think this way? Why did the scholar perform his experiments? What is the mechanism of sintering? What is the liquid phase of sintering? What is the behavior of sintering additives? What is the history and development of sintering theory? This book includes these sort of historical papers and also new original papers on sintering, all of which are very important to our understanding of the subject. Several papers have been added for this English edition, which is thus more comprehensive than its Japanese counterpart. These papers were spread out in many different sources and the benefits of collecting them together in book form is obvious.
Download or read book Melt Chemistry Relaxation and Solidification Kinetics of Glasses written by Hong Li and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will summarize the most recent development in experimentation, computation, and theory on chemistry of glass forming melt, including melt structure modeling and melt structure and characterizations. This volume provides a timely update on the advances in glass basic science research and development.
Download or read book Sintering and Related Phenomena written by George Czeslaw Kuczynski and published by . This book was released on 1973 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photonic Sintering of Silver Nanoparticles Comparison of Experiment and Theory written by Jeff West and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sintering Fundamentals written by G.S. Upadhyaya and published by Trans Tech Publications Ltd. This book was released on 2009-06-11 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This book comprises state-of-theart reviews written by acknowledged experts who are active in sintering science. It includes seven invited reviews by authors hailing from five countries: J-M.Chaix (France) discusses quantitative aspects of the microstructures and modeling of sintering; with the technical aspects of image-analysis - including that of nanostructured materials - adding extra value. Z.S. Nikolic (Serbia) provides a theoretical review of the simulation of liquid-phase sintering, particularly under microgravity conditions, and extensively and critically reviews the results reported in the sintering literature. A.L. Lisovsky (Ukraine) opens up the vista of deconsolidation of polycrystalline skeletons in sintered composite materials, and deals with systems having more than one refractory solid phase, and with nanodispersed composite materials. G.S. Upadhyaya ( India) reviews the Samsonov model for the electronic mechanism of sintering, and its relevance; pointing out that, although the model is a qualitative one, it has great utility as a predictive tool and that various case-studies drawn from real multi-phase material systems are a testimony to the value of Samsonovs model.
Download or read book Chemical Engineering Progress written by and published by . This book was released on 2007 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energetic Materials written by Manoj K. Shukla and published by Springer. This book was released on 2017-10-09 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive account of energetic materials, including their synthesis, computational modeling, applications, associated degradation mechanisms, environmental consequences and fate and transport. This multi-author contributed volume describes how armed forces around the world are moving their attention from legacy explosive compounds, which are heat and shock sensitive (thus posing greater challenges in terms of handling and storage), to the insensitive munitions compounds/formulations such as insensitive munitions explosive (IMX) and the Picatinny Arsenal Explosive (PAX) series of compounds. The description of energetic materials focuses on explosives, pyrotechnic compositions, and propellants. The contributors go on to explain how modern generation energetic compounds must be insensitive to shock and heat but at the same time yield more energy upon explosion. Nanoinspired and/or co-crystallized energetic materials offer another route to generate next-generation energetic materials, and this authoritative book bridges a large gap in the literature by providing a comprehensive analysis of these compounds. Additionally, it includes a valuable overview of energetic materials, a detailed discussion of recent advances on future energetic compounds, nanotechnology in energetic materials, environmental contamination and toxicity, assessment of munitions lethality, the application quantitative structure–activity relationship (QSAR) in design of energetics and the fate and transport of munition compounds in the environment.
Download or read book Sintering written by Volodymyr Shatokha and published by IntechOpen. This book was released on 2012-03-23 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is addressed to a large and multidisciplinary audience of researchers and students dealing with or interested in sintering. Though commonly known as a method for production of objects from fines or powders, sintering is a very complex physicochemical phenomenon. It is complex because it involves a number of phenomena exhibiting themselves in various heterogeneous material systems, in a wide temperature range, and in different physical states. It is multidisciplinary research area because understanding of sintering requires a broad knowledge - from solid state physics and fluid dynamics to thermodynamics and kinetics of chemical reactions. Finally, sintering is not only a phenomenon. As a material processing method, sintering embraces the wide group of technologies used to obtain such different products as for example iron ore agglomerate and luminescent powders. As a matter of fact, this publication is a rare opportunity to connect the researchers involved in different domains of sintering in a single book.
Download or read book Sol Gel Science written by C. Jeffrey Brinker and published by Academic Press. This book was released on 2013-10-22 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing presents the physical and chemical principles of the sol-gel process. The book emphasizes the science behind sol-gel processing with a chapter devoted to applications. The first chapter introduces basic terminology, provides a brief historical sketch, and identifies some excellent texts for background reading. Chapters 2 and 3 discuss the mechanisms of hydrolysis and condensation for nonsilicate and silicate systems. Chapter 4 deals with stabilization and gelation of sols. Chapter 5 reviews theories of gelation and examines the predicted and observed changes in the properties of a sol in the vicinity of the gel point. Chapter 6 describes the changes in structure and properties that occur during aging of a gel in its pore liquor (or some other liquid). The discussion of drying is divided into two parts, with the theory concentrated in Chapter 7 and the phenomenology in Chapter 8. The structure of dried gels is explored in Chapter 9. Chapter 10 shows the possibility of using the gel as a substrate for chemical reactions or of modifying the bulk composition of the resulting ceramic by performing a surface reaction (such as nitridation) on the gel. Chapter 11 reviews the theory and practice of sintering, describing the mechanisms that govern densification of amorphous and crystalline materials, and showing the advantages of avoiding crystallization before sintering is complete. The properties of gel-derived and conventional ceramics are discussed in Chapter 12. The preparation of films is such an important aspect of sol-gel technology that the fundamentals of film formation are treated at length in Chapter 13. Films and other applications are briefly reviewed in Chapter 14. Materials scientists and researchers in the field of sol-gel processing will find the book invaluable.
Download or read book Sintering written by Ricardo Castro and published by Springer. This book was released on 2012-09-14 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering process studies have re-emerged strongly in the past decade due to extensive discussions about the stabilization of nanoparticles and nanostructures, and the development of controlled nanograined bulk materials. This book presents the state-of-art in experiments and theory of novel sintering processes, traditional sintering and grain growth. The scope ranges from powder metallurgy to ceramic and composites processing. The challenges of conventional and novel sintering and grain growth in nanopowders and nanostructures are addressed, being useful for students as well as professionals interested in sintering at the nanoscale.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2000 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloidal Silica written by Horacio E. Bergna and published by CRC Press. This book was released on 2005-12-19 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the apparent simplicity of silica's composition and structure, scientists are still investigating fundamental questions regarding the formation, constitution, and behavior of colloidal silica systems. Colloidal Silica: Fundamentals and Applications introduces new information on colloid science related to silica chemistry as well
