Download or read book Theoretical and Experimental Investigation of Condensation on Amphiphilic Nanostructured Surfaces written by David Milton Anderson and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Condensation of water vapor is an everyday phenomenon which plays an important role in power generation schemes, desalination applications and high-heat flux cooling of power electronic devices. Continuous dropwise condensation is a desirable mode of condensation in which small, highly-spherical droplets regularly form and shed off the surface before a thick liquid is formed, thereby minimizing the thermal resistance to heat transfer across the condensate layer. While difficult to induce and sustain, dropwise condensation has been shown to achieve heat and mass transfer coefficients over an order of magnitude higher than its filmwise counterpart. Superhydrophobic surfaces have been extensively studied to promote dropwise condensation with mixed results; often surfaces that are superhydrophobic to deposited droplets formed in the gas phase above the surface do not retain this behavior with condensed droplets nucleated and grown on the surface. Recently, nanostructured superhydrophobic surfaces have been developed that are robust to vapor condensation; however, these surfaces still are not ideal for condensation heat transfer due to the high thermal resistance of the vapor layer trapped underneath the droplets and the reduced footprint of direct contact between the highly-spherical droplets and the underlying substrate. This work has two main objectives. First, a comprehensive free energy based thermodynamic model is developed to better understand why traditional superhydrophobic surfaces often lose their properties when exposed to condensed droplets. The model is first validated using data from the existing literature and then extended to analyze the suitability of amphiphilic (e.g. part hydrophobic and part hydrophilic) nanostructured surfaces for condensation applications. Secondly, one of the promising amphiphilic surfaces identified by the thermodynamic model is fabricated and tested to observe condensation dynamic behavior. Two complementary visualization techniques, environmental scanning electron microscopy (ESEM) and optical (light) microscopy, are used to probe the condensation behavior and compare the performance to that of a traditional superhydrophobic surface. Observations from the condensation experiments are used to propose a new mechanism of coalescence that governs the temporal droplet size distribution on the amphiphilic nanostructured surface and continually generates fresh sites for the droplet nucleation and growth cycle that is most efficient at heat transfer.
Download or read book Theoretical and Experimental Investigation of Condensation Heat Transfer Enhancement on an Inclined Surface Coated with a Highly Conductive Porous Substrate written by Merid Aboye and published by . This book was released on 1992 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Investigation of Condensation on Mechanically Treated and Superhydrophobic coated Surfaces written by Nataliia Fedorova and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condensation on Superhydrophobic Copper Oxide Nanostructures written by Nicholas Gang Dou and published by . This book was released on 2012 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condensation is an important process in many power generation and water desalination technologies. Superhydrophobic nanostructured surfaces have unique condensation properties that may enhance heat transfer through a mechanism driven by surface tension. The increased droplet removal rate and reduced size of departing droplets facilitates improvements over traditional filmwise and dropwise condensation. This work investigates copper oxide nanostructures as a potential substrate for superhydrophobic condensation. We first explored and refined a procedure for creating and functionalizing oxide nanostructures on copper surfaces. The condensation behavior of these samples was characterized using an optical microscope and an environmental scanning electron microscope by quantifying the distribution of nucleation sites and droplet growth behavior. Using the knowledge gained from these studies, an experimental test bed was designed and fabricated to measure macro-scale condensation heat transfer for flat and tubular sample geometries. Preliminary results validate previous theoretical and experimental studies of filinwise condensation and demonstrate heat transfer enhancement with dropwise condensation. The copper oxide nanostructures exhibited jumping, which shows the effectiveness of the synthesis procedure.
Download or read book Development and Characterization of Micro nano Structured Surfaces for Enhanced Condensation written by Nenad Miljkovic and published by . This book was released on 2013 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/nanostructures have long been recognized to have potential for heat transfer enhancement in phase-change processes by achieving extreme wetting properties, which is of great importance in a wide range of applications including thermal management, building environment control, water harvesting, desalination, and industrial power generation. This thesis focuses on the fundamental understanding of water vapor condensation on superhydrophobic surfaces, as well as the demonstration of such surfaces for enhanced condensation heat transfer performance. We first studied droplet-surface interactions during condensation on superhydrophobic surfaces to understand the emergent droplet wetting morphology. We demonstrated the importance of considering local energy barriers to understand the condensed droplet morphologies and showed nucleation-mediated droplet-droplet interactions can overcome these barriers to develop wetting states not predicted by global thermodynamic analysis. To minimize these droplet-droplet interactions and ensure the formation of favorable morphologies for enhanced condensation heat transfer, we show that the structure length scale needs to be minimized while ensuring the local energy barriers satisfy the morphology dependent criteria. This mechanistic understanding offers insight into the role of surface-structure length scale and provides a quantitative basis for designing surfaces optimized for condensation in engineered systems. Using our understanding of emergent droplet wetting morphology, we experimentally and numerically investigated the morphology dependent individual droplet growth rates. By taking advantage of well-controlled functionalized silicon nanopillars, the growth and shedding behavior of both suspended and partially wetting droplets on the same surface during condensation was observed. Environmental scanning electron microscopy was used to demonstrate that initial droplet growth rates of partially wetting droplets were 6 times larger than that of suspended droplets. A droplet growth model was developed to explain the experimental results and showed that partially wetting droplets had 4-6 times higher heat transfer rates than that of suspended droplets. Based on these findings, the overall performance enhancement created by surface nanostructuring was examined in comparison to a flat hydrophobic surface. These nanostructured surfaces had 56% heat flux enhancement for partially wetting droplet morphologies, and 71% heat flux degradation for suspended morphologies in comparison to flat hydrophobic surfaces. This study provides fundamental insights into the previously unidentified role of droplet wetting morphology on growth rate, as well as the need to design nanostructured surfaces with tailored droplet morphologies to achieve enhanced heat and mass transfer during dropwise condensation. To create a unified model for condensation capable of predicting the surface heat transfer for a variety of surface length scales, geometries, and condensation conditions, we incorporated the emergent droplet wetting morphology, individual droplet heat transfer, and size distribution. The model results showed a specific range of characteristic length scales (0.5 - 2 ptm) allowing for the formation of coalescence-induced jumping droplets with a 190% overall surface heat flux enhancement over conventional flat dropwise condensing surfaces. This work provided a unified model for dropwise condensation on micro/nanostructured superhydrophobic surfaces and offered guidelines for the selection of ideal structured surfaces to maximize heat transfer. Using the insights gained from the developed model and optimization, a scalable synthesis technique was developed to produce functionalized oxide nanostructures on copper surfaces capable of sustaining superhydrophobic condensation. Nanostructured copper oxide (CuO) films were formed via chemical oxidation in an alkaline solution resulting in dense arrays of sharp CuO nanostructures with characteristic heights and widths of -1 pm and -300 nm, respectively. Condensation on these surfaces was characterized using optical microscopy and environmental scanning electron microscopy to quantify the distribution of nucleation sites and elucidate the growth behavior of individual droplets with characteristic radii of -1 to 10 pm at supersaturations
Download or read book Experimental Investigation Into Condensation on Heterogeneous Surface written by Ramana Saketh Vanga and published by . This book was released on 2014 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energy systems operated by a thermal energy resource such as geothermal power plants and solar thermal power systems are demanding improvement in their condensation performance. While their energy resources are naturally obtained at almost no cost, heat rejecting components are relatively expensive to maintain and operate. In this research, a heterogeneous condensing surface is proposed to enhance the condensation heat transfer coefficient in vapor-to-liquid heat exchangers. Parallel stripes with hydrophobic feature and ones without it alternate on its surface. The effect of surface wettability variation that is generated by the heterogeneous surface on the dropwise condensation heat transfer of saturated steam on the flat plate copper surface is experimentally investigated. A vertical flat plate condenser is constructed to evaluate the performance of the heterogeneous condensing surface in comparison with a plain copper sample and a homogeneous hydrophobic-treated copper sample. Experimental results show that condensation heat transfer of steam on the homogeneous hydrophobic-treated sample is superior to that of the plain copper surface despite the fact that both the surfaces stably promote dropwise condensation. At the subcooling temperature of 3°C, the difference in the heat transfer coefficients between the plain copper sample and the hydrophobic-treated copper sample is almost twofold. The heat transfer coefficients for the heterogeneous surface at smaller subcooling temperatures, when its stripes situate horizontally, are as high as the heat transfer coefficients for the homogeneous hydrophobic-treated surface. The enhancement for the horizontal heterogeneous sample over the plain copper sample is approximately 100%. The heat transfer coefficient for the heterogeneous sample with its stripes being vertical at 4°C subcooling is 25% greater than that of the plain copper sample. Higher heat transfer coefficients are observed at smaller subcooling temperatures for all the samples. The results and observations of this project suggest that the heterogeneous surface has the potential to enhance the heat transfer coefficients.
Download or read book Experimental Investigation of Condensation Heat Transfer in Microchannels written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 21st Century Surface Science written by Phuong Pham and published by BoD – Books on Demand. This book was released on 2020-11-26 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface sciences elucidate the physical and chemical aspects of the surfaces and interfaces of materials. Of great interest in this field are nanomaterials, which have recently experienced breakthroughs in synthesis and application. As such, this book presents some recent representative achievements in the field of surface science, including synthesis techniques, surface modifications, nanoparticle-based smart coatings, wettability of different surfaces, physics/chemistry characterizations, and growth kinetics of thin films. In addition, the book illustrates some of the important applications related to silicon, CVD graphene, graphene oxide, transition metal dichalcogenides, carbon nanotubes, carbon nanoparticles, transparent conducting oxide, and metal oxides.
Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.
Download or read book Nucleation of Water written by Ari Laaksonen and published by Elsevier. This book was released on 2021-11-25 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nucleation of Water: From Fundamental Science to Atmospheric and Additional Applications provides a comprehensive accounting of the current state-of-the-art regarding the nucleation of water. It covers vapor-liquid, liquid-vapor, liquid-ice and vapor-ice transitions and describes basic kinetic and thermodynamic concepts in a manner understandable to researchers working on specific applications. The main focus of the book lies in atmospheric phenomena, but it also describes engineering and biological applications. Bubble nucleation, although not of major atmospheric relevance, is included for completeness. This book presents a single, go-to resource that will help readers understand the breadth and depth of nucleation, both in theory and in real-world examples. - Offers a single, comprehensive work on water nucleation, including cutting- edge research on ice, cloud and bubble nucleation - Written primarily for atmospheric scientists, but it also presents the theories in such a way that researchers in other disciplines will find it useful - Written by one of the world's foremost experts on ice nucleation
Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.
Download or read book Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications written by Srabanti Ghosh and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely overview of fundamental and advanced topics of conjugated polymer nanostructures Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications is a comprehensive reference on conjugated polymers for energy applications. Distinguished academic and editor Srabanti Ghosh offers readers a broad overview of the synthesis, characterization, and energy-related applications of nanostructures based on conjugated polymers. The book includes novel approaches and presents an interdisciplinary perspective rooted in the interfacing of polymer and synthetic chemistry, materials science, organic chemistry, and analytical chemistry. This book provides complete descriptions of conjugated polymer nanostructures and polymer-based hybrid materials for energy conversion, water splitting, and the degradation of organic pollutants. Photovoltaics, solar cells, and energy storage devices such as supercapacitors, lithium ion battery electrodes, and their associated technologies are discussed, as well. Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications covers both the fundamental topics and the most recent advances in this rapidly developing area, including: The design and characterization of conjugated polymer nanostructures, including the template-free and chemical synthesis of polymer nanostructures Conjugated polymer nanostructures for solar energy conversion and environmental protection, including the use of conjugated polymer-based nanocomposites as photocatalysts Conjugated polymer nanostructures for energy storage, including the use of nanocomposites as electrode materials The presentation of different and novel methods of utilizing conjugated polymer nanostructures for energy applications Perfect for materials scientists, polymer chemists, and physical chemists, Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications also belongs on the bookshelves of organic chemists and any other practicing researchers, academics, or professionals whose work touches on these highly versatile and useful structures.
Download or read book Intermolecular and Surface Forces written by Jacob N. Israelachvili and published by Academic Press. This book was released on 2011-07-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermolecular and Surface Forces describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. - Starts from the basics and builds up to more complex systems - Covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels - Multidisciplinary approach: bringing together and unifying phenomena from different fields - This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)
Download or read book Handbook of Phase Change written by S.G. Kandlikar and published by Routledge. This book was released on 2019-01-22 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa
Download or read book Fundamentals of Heat and Mass Transfer written by T. L. Bergman and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 2249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Heat and Mass Transfer, 7th Edition is the gold standard of heat transfer pedagogy for more than 30 years, with a commitment to continuous improvement by four authors having more than 150 years of combined experience in heat transfer education, research and practice. Using a rigorous and systematic problem-solving methodology pioneered by this text, it is abundantly filled with examples and problems that reveal the richness and beauty of the discipline. This edition maintains its foundation in the four central learning objectives for students and also makes heat and mass transfer more approachable with an additional emphasis on the fundamental concepts, as well as highlighting the relevance of those ideas with exciting applications to the most critical issues of today and the coming decades: energy and the environment. An updated version of Interactive Heat Transfer (IHT) software makes it even easier to efficiently and accurately solve problems.
Download or read book Nanobiosensors written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-09-28 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanobiosensors: Nanotechnology in the Agri-Food Industry, Volume 8, provides the latest information on the increasing demand for robust, rapid, inexpensive, and safe alternative technologies that monitor, test, and detect harmful or potentially dangerous foods. Due to their high sensitivity and selectivity, nanobiosensors have attracted attention for their use in monitoring not only biological contaminants in food, but also potential chemical and physical hazards. This book offers a broad overview regarding the current progress made in the field of nanosensors, including cutting-edge technological progress and the impact of these devices on the food industry. Special attention is given to the detection of microbial contaminants and harmful metabolotes, such as toxins and hormones, which have a great impact on both humans and animal health and feed. - Includes the most up-to-date information on nanoparticles based biosensors and quantum dots for biological detection - Provides application methods and techniques for research analysis for bacteriological detection and food testing - Presents studies using analytical tools to improve food safety and quality analysis
Download or read book Handbook of Surface Plasmon Resonance written by Richard B. M. Schasfoort and published by Royal Society of Chemistry. This book was released on 2017-05-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface plasmon resonance (SPR) plays a dominant role in real-time interaction sensing of biomolecular binding events, this book provides a total system description including optics, fluidics and sensor surfaces for a wide researcher audience.
