Download or read book The Use of the Otto Atkinson Cycle to Improve the Part Load Fuel Efficiency of Spark Ignition Engines written by D.J. Bowker and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Spark Ignited Otto Atkinson Piston Engine written by Gregory William Eng and published by . This book was released on 1995 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of a Prototype Otto Atkinson Engine and Evaluation of the Part Load Fuel Efficiency written by Peter Jacob Van Binsbergen and published by . This book was released on 1992* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Proceedings of the Fall Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2007 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Spark Ignition Combustion written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Control of Diesel and Natural Gas Engines for Industrial and Rail Transportation Applications written by American Society of Mechanical Engineers. Internal Combustion Engine Division and published by . This book was released on 2003 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Practical Variable Valve Timing Design written by Troy Michael Herndon and published by . This book was released on 1995 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book OPTIMIZATION AND COMPARISON OF OVER EXPANDED AND OTHER HIGH EFFICIENCY FOUR STROKE SPARK IGNITED BOOSTED ENGINES written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Recent fuel economy and emission regulations are the major concern of the research and development of modern internal combustion engine. Such technologies include variable valve timing (VVT), direct injection (DI), turbocharging, downsizing, and over-expanded cycle are used by many manufacturers to improve engine fuel economy or increase power density. Current Atkinson cycle technology in the production engine is mainly realized by an advanced valvetrain system to reduce the effective compression ratio while maintaining the same expansion ratio. Another approach to realize over-expanded cycle engine is to utilize a multi-link cranktrain mechanism. Although the Atkinson cycle was originally patented in the 1880s, the research of the over-expanded cycle engine realized by a multi-link cranktrain design is incomplete. This study focuses on the investigation of over-expanded engine realized by a cranktrain with a multi-link mechanism. The multi-link mechanism of cranktrain was developed and simulated with the constraints of packaging and match the same specification as the baseline engine including compression ratio, bore, and intake/compression stroke. This study also discusses adapting the cam profiles, cam phasing, and spark timing to compensate for the geometric characteristics difference between an Atkinson cycle engine and a conventional engine. The 1-D engine model was developed and calibrated in the commercial engine program, GT-Suite/GT-Power, based on the experimental results from a production four-cylinder spark-ignited engine (not over-expanded). The simulations of multi-link over-expanded engine and high compression engine were realized by substituting the new cranktrain for the baseline cranktrain In this study, the investigation of the multi-link over-expanded engine included a series of operating conditions from light load to high load. The results were compared at the optimized condition between the baseline engine, multi-link over-expand engine, and high compression engine. At the light load condition, it was observed that the net indicated efficiency of the over-expanded engine was slightly improved based on the adjustment method. This study also investigated the operating condition of the baseline engine with knock constrained and exhaust temperature constrained conditions at medium to high load. With the optimization, the over-expanded cycle engine is less constrained than the baseline engine due to the reduced knock propensity and exhaust gas temperature resulting in the further improvement of net indicated efficiency. The study of the multi-link over-expanded cycle engine includes the comparison with the latest production high compression ratio engine, representing state-of-the-art high efficiency engine technologies. The net indicated efficiency of multi-link over-expanded engine is even better than the peak efficiency point of the high compression engine.
Download or read book Practical Limits of Efficiency of Engines written by and published by . This book was released on 1986 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Download or read book I C Engines And Combustion written by and published by Allied Publishers. This book was released on with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
Download or read book Journal of the Institution of Engineers India written by and published by . This book was released on 1998 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Engineering for Gas Turbines and Power written by and published by . This book was released on 2008 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Injection in Spark ignition Otto Cycle Engines written by Texaco, Inc and published by . This book was released on 1943 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
