Download or read book The Use of Exhaust Gas Recirculation to Optimize Fuel Economy and Minimize Emission in Engines Operating on E85 Fuel written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes activities conducted for the project "The Use of Exhaust Gas Recirculation to Optimized Fuel Economy and Minimize Emissions in Engines Operating on E85 Fuel" under COOPERATIVE AGREEMENT NUMBER DE-FC26-07NT43271, which are as outlined in the STATEMENT OF PROJECT OBJECTIVES (SOPO) dated March 2007 and in the supplemental SOPO dated October 2010. The project objective was to develop and demonstrate an internal combustion engine that is optimized for E85 (85% ethanol and 15% gasoline) fuel operation to achieve substantially improved fuel economy while operating with E85 fuel and that is also production viable in the near- to medium-term. The key engine technology selected for research and development was turbocharging, which is known to improve fuel economy thru downsizing and is in particular capable of exploiting ethanol fuel's characteristics of high octane number and high latent heat of vaporization. The engine further integrated synergistic efficiency improving technologies of cooled exhaust gas recirculation (EGR), direct fuel injection and dual continuously variable intake and exhaust cam phasers. On the vehicle level, fuel economy was furthered thru powertrain system optimization by mating a state-of-the-art six-speed automatic transmission to the engine. In order to achieve the project's objective of near- to medium-term production viability, it was essential to develop the engine to be flex-fuel capable of operating with fuels ranging from E0 (0% ethanol and 100% gasoline) to E85 and to use three-way type of catalyst technology for exhaust aftertreatment. Within these scopes, various technologies were developed through systems approach to focus on ways to help accelerate catalyst light-off. Significant amount of development took place during the course of the project within General Motors, LLC. Many prototype flex-fuel engines were designed, built and developed with various hardware configurations selected to achieve the project goals. Several flex-fuel demonstration vehicles were designed and built for carrying out calibration development and final testing to quantify the technology merits. Based on the extensive test results collected from dynamometer and vehicle testing, the fuel economy benefits of cooled EGR from the intended level of turbocharger technology were quantified. When combined with turbo downsizing, the FE benefits are considered large enough for E0 fuel as well as for E85 fuel to warrant further development of the technology beyond the current proof-of-concept level to a level that can meet production driveability quality and durability requirements in order to meet customers' expectations. Cold-start cart test results from the emissions segment of the project were positive, confirming the assumption of faster thermal response of turbo exhaust system for emissions reductions for both E0 and E85 fuels. Vehicle emissions test results directionally correlated to the cold-start cart findings. The limited number of test runs did demonstrate the potentials of meeting stringent emission standards, however, they did not comprehend the factors such as hardware variability and long-term durability, 3 which are essential for mass production to satisfy customers' expectations. It is therefore recommended, moving forward, durability concerns over turbocharger, EGR system and aftertreatment system, which would likely impact production viability, should be addressed. The data moreover suggested that further FE increase is likely with turbocharger technology advancement.

Download or read book Influence of Exhaust Gas Recirculation on Engine Emissions and Combustion Using Ethanol 85 written by Nandha Kumar Manoharan and published by . This book was released on 2007 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Greener and Scalable E fuels for Decarbonization of Transport written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-10 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights ways of using gaseous and liquid e-fuels like hydrogen (H2), methane (CH4), methanol (CH3OH), DME (CH3-O-CH3), Ammonia (NH3), synthetic petrol and diesel, etc in existing engines and their effects on tailpipe emissions. The contents also cover calibration and optimization procedure for adaptation of these fuels. the volume also discusses the economical aspect of these fuels. Chapters include recent results and are focused on current trends of automotive sector. This book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.

Download or read book Energy Systems and Nanotechnology written by Dharmendra Tripathi and published by Springer Nature. This book was released on 2021-05-27 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a very useful and readable collection of chapters in nanotechnologies for energy conversion, storage, and utilization, offering new results which are sure to be of interest to researchers, students, and engineers in the field of nanotechnologies and energy. Readers will find energy systems and nanotechnology very useful in many ways such as generation of energy policy, waste management, nanofluid preparation and numerical modelling, energy storage, and many other energy-related areas. It is also useful as reference book for many energy and nanofluid-related courses being taken up by graduate and undergraduate students. In particular, this book provides insights into various forms of renewable energy, such as biogas, solar energy, photovoltaic, solar cells, and solar thermal energy storage. Also, it deals with the CFD simulations of various aspects of nanofluids/hybrid nanofluids.

Download or read book Potential and Challenges of Low Carbon Fuels for Sustainable Transport written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2022-01-01 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on low carbon fuels a preferable class of fuels for Internal Combustion Engines (ICEs) highlighting the effect of low carbon fuels on tailpipe emissions. This book aims to strengthen the knowledge base dealing with low carbon fuels as a sustainable transport fuel. The volume includes recent results and are focused on current trends of automotive sector. This book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.

Download or read book Using Exhaust Gas Recirculation EGR in Spark ignition Engines to Lower NOx Emissions and Improve Fuel Consumption written by Patrick Glenn Szymkowicz and published by . This book was released on 1988 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Fuels for Sustainable Mobility written by Pravesh Chandra Shukla and published by Springer Nature. This book was released on 2023-05-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the use of renewable fuels for clean transportation and its applications on internal combustion engines. The contents focus on the key aspects of fuel production processes and its impact on various segments of the transportation sector and for sustainable mobility. Several kinds of fuels are assessed such as biofuels, alcohols, and hydrogen, and their effects on the combustion process are characterized by application. This volume will be of use to those working in academia and industry as well as energy experts and policy makers.

Download or read book Application of Clean Fuels in Combustion Engines written by Gabriele Di Blasio and published by Springer Nature. This book was released on 2022-01-04 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the impact of fuels characteristics and their effects on the combustion processes in internal combustion engines. It includes the analysis of a variety of biofuels (alcohol fuels and biodiesel) and biogases (natural gas, hydrogen, etc.), providing valuable information related to consequent effects on performance and emissions. The contents focus on recent results and current trends of fuel utilization in the transport sector. State-of-the-art of clean fuels application are also discussed. Thighs book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1983 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Utilizing a Cycle Simulation to Examine the Use of Exhaust Gas Recirculation EGR for a Spark ignition Engine written by Rajeshkumar Ghanshyambhai Shyani and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The exhaust gas recirculation (EGR) system has been widely used to reduce nitrogen oxide (NOx) emission, improve fuel economy and suppress knock by using the characteristics of charge dilution. However, previous studies have shown that as the EGR rate at a given engine operating condition increases, the combustion instability increases. The combustion instability increases cyclic variations resulting in the deterioration of engine performance and increasing hydrocarbon emissions. Therefore, the optimum EGR rate should be carefully determined in order to obtain the better engine performance and emissions. A thermodynamic cycle simulation of the four-stroke spark-ignition engine was used to determine the effects of EGR on engine performance, emission characteristics and second law parameters, considering combustion instability issues as EGR level increases. A parameter, called 'Fuel Fraction Burned, ' was introduced as a function of the EGR percentage and used in the simulation to incorporate the combustion instability effects. A comprehensive parametric investigation was conducted to examine the effects of variations in EGR, load and speed for a 5.7 liter spark-ignition automotive engine. Variations in the thermal efficiencies, brake specific NOx emissions, average combustion temperature, mean exhaust temperature, maximum temperature and relative heat transfer as functions of exhaust gas recycle were determined for both cooled and adiabatic EGR configurations. Also effects of variations in the load and speed on thermal efficiencies, relative heat transfers and destruction of availability due to combustion were determined for 0% EGR and 20% EGR cases with both cooled and adiabatic configurations. For both EGR configurations, thermal efficiencies first increase, reach a maximum at about 16% EGR and then decrease as the EGR level increases. Thermal efficiencies are slightly higher for cooled EGR configuration than that for adiabatic configuration. Concentration of nitric oxide emissions decreases from about 2950 ppm to 200 ppm as EGR level increases from 0% to 20% for cooled EGR configuration. The cooled EGR configuration results in lower nitric oxide emissions relative to the adiabatic EGR configuration. Also second law parameters show the expected trends as functions of EGR. Brake thermal efficiency is higher for the 20% EGR case than that for the no EGR case over the range of load (0 to WOT) and speed (600 rpm to 6000 rpm). Predictions made from the simulation were compared with some of the available experimental results. Predicted thermal efficiencies showed a similar trend when compared to the available experimental data. Also, percentage of unused fuel availability increases as the EGR level increases, and it can be seen as one of the effects of deteriorating combustion quality as the EGR level increases.

Download or read book Theory of Ground Vehicles written by J. Y. Wong and published by John Wiley & Sons. This book was released on 2008-08-04 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology/Engineering/Automotive Engineering for advancing ground vehicle mobility A standard text and reference for both the educational and professional communities, Theory of Ground Vehicles gives aspiring and practicing engineers a fundamental understanding of the critical factors affecting the performance, handling, and ride essential to the development and design of ground vehicles. In view of the growing concerns over environmental impact, energy efficiency, and safety, this new Fourth Edition has been revised and expanded to address these issues and other developments in the field. Retaining the contents and format of previous editions, the Fourth Edition introduces new material to reflect recent advances in ground transportation technology, including: * Computer-aided methods for design and performance evaluation of off-road vehicles and their practical applications * Emissions and fuel economy * Hybrid electric drives and fuel cells and their operating principles * Selection of vehicle configurations for off-road operations * Road vehicle stability control * ISO 2631-1:1997 and its applications to evaluating vehicle ride characteristics As in previous editions, this book focuses on applying engineering principles to the analysis of vehicle behavior. A large number of practical examples and problems are included throughout to help readers bridge the gap between theory and practice. With its broad coverage and pedagogical aids, Theory of Ground Vehicles, Fourth Edition remains the text of choice for students, engineers, and researchers wishing to master and apply basic theory to solve real-world, road and off-road vehicle mobility problems.

Download or read book Biomass Processing for Biofuels Bioenergy and Chemicals written by Wei-Hsin Chen and published by MDPI. This book was released on 2020-05-23 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass can be used to produce renewable electricity, thermal energy, transportation fuels (biofuels), and high-value functional chemicals. As an energy source, biomass can be used either directly via combustion to produce heat or indirectly after it is converted to one of many forms of bioenergy and biofuel via thermochemical or biochemical pathways. The conversion of biomass can be achieved using various advanced methods, which are broadly classified into thermochemical conversion, biochemical conversion, electrochemical conversion, and so on. Advanced development technologies and processes are able to convert biomass into alternative energy sources in solid (e.g., charcoal, biochar, and RDF), liquid (biodiesel, algae biofuel, bioethanol, and pyrolysis and liquefaction bio-oils), and gaseous (e.g., biogas, syngas, and biohydrogen) forms. Because of the merits of biomass energy for environmental sustainability, biofuel and bioenergy technologies play a crucial role in renewable energy development and the replacement of chemicals by highly functional biomass. This book provides a comprehensive overview and in-depth technical research addressing recent progress in biomass conversion processes. It also covers studies on advanced techniques and methods for bioenergy and biofuel production.

Download or read book Use of New and Renewable Energy Sources with Emphasis on Shelter Requirements written by United Nations Centre for Human Settlements and published by UN-HABITAT. This book was released on 1990 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the third International Conference on Automotive and Fuel Technology written by and published by Allied Publishers. This book was released on 2004 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Renewable Energy Systems Part 1 and 2 written by S. C. Bhatia and published by CRC Press. This book was released on 2014-04-14 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a complete treatise on renewable energy sources and also includes issues relating to biofuels. It aims to serve as a text for undergraduate and postgraduate students in relevant disciplines and a reference for all the professionals in the related fields.

Download or read book Which Fuels for Low CO2 Engines written by Pierre Duret and published by Editions TECHNIP. This book was released on 2004 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the world, research and development in the field of vehicle transportation is increasingly focusing on engine and fuel combinations. The conventional and alternative fuels of the future are seen as fundamental to the development of a new generation of internal combustion engines that attain low well-to-wheel CO2 emissions along with near-zero pollutant emissions. These issues were debated during an international conference whose proceedings are presented in this book. This international conference attracted specialists in the field, including participants from universities, research centres and industry.Contents : Future of liquid fuels, Engine and fuel-related issues in HCCI & CAI combustion, Energy conversion in engines from natural gas, Use of hydrogen in IC engines, Which fuels for low CO2 engines?

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.