Download or read book Big Steel written by Kenneth Warren and published by University of Pittsburgh Pre. This book was released on 2001-07-15 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: At its formation in 1901, the United States Steel Corporation was the earth's biggest industrial corporation, a wonder of the manufacturing world. Immediately it produced two thirds of America's raw steel and thirty percent of the steel made worldwide. The behemoth company would go on to support the manufacturing superstructure of practically every other industry in America. It would create and sustain the economies of many industrial communities, especially Pittsburgh, employing more than a million people over the course of the century. A hundred years later, the U.S. Steel Group of USX makes scarcely ten percent of the steel in the United States and just over one and a half percent of global output. Far from the biggest, the company is now considered the most efficient steel producer in the world. What happened between then and now, and why, is the subject of Big Steel, the first comprehensive history of the company at the center of America's twentieth-century industrial life.Granted privileged and unprecedented access to the U.S. Steel archives, Kenneth Warren has sifted through a long, complex business history to tell a compelling story. Its preeminent size was supposed to confer many advantages to U.S. Steel—economies of scale, monopolies of talent, etc. Yet in practice, many of those advantages proved illusory. Warren shows how, even in its early years, the company was out-maneuvered by smaller competitors and how, over the century, U.S. Steel's share of the industry, by every measure, steadily declined. Warren's subtle analysis of years of internal decision making reveals that the company's size and clumsy hierarchical structure made it uniquely difficult to direct and manage. He profiles the chairmen who grappled with this "lumbering giant," paying particular attention to those who long ago created its enduring corporate culture—Charles M. Schwab, Elbert H. Gary, and Myron C. Taylor.Warren points to the way U.S. Steel's dominating size exposed it to public scrutiny and government oversight—a cautionary force. He analyzes the ways that labor relations affected company management and strategy. And he demonstrates how U.S. Steel suffered gradually, steadily, from its paradoxical ability to make high profits while failing to keep pace with the best practices. Only after the drastic pruning late in the century—when U.S. Steel reduced its capacity by two-thirds—did the company become a world leader in steel-making efficiency, rather than merely in size. These lessons, drawn from the history of an extraordinary company, will enrich the scholarship of industry and inform the practice of business in the twenty-first century.
Download or read book Steel Phoenix written by Christopher G.L. Hall and published by Palgrave Macmillan. This book was released on 1997-02-12 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel Phoenix recounts the downfall of 'Big Steel' in America and the emergence of a new steel industry from the ashes of the old. Hall reveals how the death of the traditional steel industry devastated cities such as Pittsburgh, Cleveland and Youngstown. Hall then proceeds to examine how pioneering entrepreneurs and engineers rebuilt the industry by recycling large supplies of scrap steel, giving way to a 'minimill' industry which ultimately saved what was left of old Big Steel mills. The story of an industry's surprising rebirth and restoration, Steel Phoenix is a riveting analysis and a necessary resource for any student of American business and history.
Download or read book And the Wolf Finally Came written by John Hoerr and published by University of Pittsburgh Press. This book was released on 2014-07-22 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Choice 1988 Outstanding Academic Book • Named one of the Best Business Books of 1988 by USA TodayA veteran reporter of American labor analyzes the spectacular and tragic collapse of the steel industry in the 1980s. John Hoerr's account of these events stretches from the industrywide barganing failures of 1982 to the crippling work stoppage at USX (U.S. Steel) in 1986-87. He interviewed scores of steelworkers, company managers at all levels, and union officials, and was present at many of the crucial events he describes. Using historical flashbacks to the origins of the steel industry, particularly in the Monongahela Valley of southwestern Pennsylvania, he shows how an obsolete and adversarial relationship between management and labor made it impossible for the industry to adapt to shattering changes in the global economy.
Download or read book A Profile of the Steel Industry written by Peter Warrian and published by Business Expert Press. This book was released on 2012-11-02 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel companies were at the birth of the modern business corporation. The first billion dollar corporation ever formed was U.S. Steel in 1901. By the mid-twentieth century the steel mill and the automobile plant were the two pillars upon which the twentieth century industrial economy rested. Given the scale of capital and operations, vertical integration was seen to be pivotal, from the raw materials of iron ore and coal on one end of the supply chain to the myriad of finished products on the other. By the end of the twentieth century, however, things had dramatically changed. Take a look inside for a brilliant and concise history of the steel industry. The author has put together a true presentation of the economics of the industry, with an overview of how the industry operates and the environment in which it operates. This book includes a detailed discussion of the regulation of the industry; a documentation of the reasons why a rejuvenated steel industry will be critical to the economic health of the United States and Canada; and a rationale for the reemergence of the steel industry in particular, and manufacturing in general, as a vital force in the North American economy of the new millennium. It was widely perceived that the United States was moving from an industrial age into an information age, driven by high technology. That process is now being reversed. The steel industry has continuously been forced to remake itself, and this book describes those developments and dynamics.
Download or read book The Decline of American Steel written by Paul A. Tiffany and published by Oxford University Press, USA. This book was released on 1988 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Tiffany shows that American decision makers who ignore the past are likely to jeopardize America's future. So persuasive is his account of the historical antagonism between steel management, labor and government that advocates of industrial policy will have to reconsider the premise of cooperation on which it is based.
Download or read book The American Steel Industry written by Luc Kiers and published by Routledge. This book was released on 2019-07-16 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is the cause of the American steel industry's deplorable situation today? Troubled in many areas—competition from imports, technology implementation, cost and utilization of raw materials, investment policy, philosophy of management, and union attitudes, to name only a few—can the industry survive? These are the questions Dr. Kiers confronts in this book. Unless answers can be found, he warns, the result will be further decline and, finally, bankruptcy or nationalization. Unwilling to accept either possibility, Dr. Kiers challenges the steel industry to achieve a rebirth he sees as feasible only through a hard-nosed, realistic approach, an insistence on innovation, and a willingness to apply discipline to every facet of steel making. Dr. Kiers presents an in-depth analysis of Japan's steel industry, compares it with the U.S. industry, and discusses U.S. technology and import problems with reference to Japan. He then inventories the factors responsible for the current problems and lays the groundwork for a new start, going on to point out that the difficulties faced by the steel industry may be a portent of what will happen to other industries unless they, too, reassess both labor and management attitudes and make radical changes.
Download or read book The American Steel Industry 1850 1970 written by Kenneth Warren and published by University of Pittsburgh Press. This book was released on 2014-02-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A richly detailed account of the American steel industry from its beginnings until 1970, when its long period of international leadership was challenged, this book interprets steel from viewpoints of historical and economic geography. It considers both physical factors, such as resouces, and human factors such as market, organization, and governmental policy. In major discussions of the east coast, Pittsburgh, the Ohio Valley, the Great Lakes, the South and the West, Warren analyzes the location and relocation of steel plants over 120 years. He explains the influence on location of a variety of factors: The accessibility of resources, the cost of transportation, the existence of specialized markets, and the availability of entrepreneurial skills, capital, and labor. He also evaluates the role of management in the development of the industry, through an analysis of individual companies, including Bethlehem, Carnegie, United States Steel, Kaiser, Inland, Jones and Laughlin, and Youngstown Sheet and Tube. Warren examines the influence exerted on the industry by complex technological changes and weighs their significance against market forces and the supply of natural resources. In the production process alone, the industry changed from pig iron to steel; from charcoal to anthracite; to bituminous coking coal; and from the widespread use of low-grade ore from the eastern United States, to the high quality but localized deposits of the Upper Great Lakes, to imported ores. Unlike other industrialized nations, the United States has undergone major geographical shifts in steel consumption since the 1850s. As the American population moved south and west into new territory, steel followed. Warren concludes that these radical alterations in the distribution and demand were the decisive force in the location of steel production.
Download or read book An Economic History of the American Steel Industry written by Robert P. Rogers and published by Routledge. This book was released on 2009-03-30 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basic outline of the history of the American steel industry, a sector of the economy that has been an important part of the industrial system. The book starts with the 1830's, when the American iron and steel industry resembled the traditional iron producing sector that had existed in the old world for centuries, and it ends in 2001. The product of this industry, steel, is an alloy of iron and carbon that has become the most used metal in the world. The very size of the steel industry and its position in the modern economy give it an unusual relevance to the economic, social, and political system.
Download or read book The Renaissance of American Steel written by Roger S. Ahlbrandt and published by Oxford University Press. This book was released on 1996-11-07 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the end of the 1980s, the once mighty U.S. steel industry seemed on its last legs. More than a quarter of a million jobs had been lost, and communities like Pittsburgh and Bethlehem were devastated. Yet today, the industry again stands as a world-class competitor. In The Renaissance of American Steel, Roger Ahlbrandt, Richard Fruehan, and Frank Giarratani illuminate the forces behind this remarkable comeback, drawing valuable lessons for managers not only in the steel business but in any business now battling the global marketplace. Citing evidence from a wide range of companies in the U.S., the U.K., and Japan, and clearly explaining the basics of steel production, the authors show how the industry's rebirth resulted both from the downsizing of big companies and the rise of minimills capturing markets from the larger companies. They describe how large, traditional firms--including U.S. Steel, British Steel, and Nippon Steel--recognized that they had to reduce the scope of their operations and reorganize to become more competitive. U.S. Steel CEO Tom Graham, for instance, closed plants and refocused the firm's resources on the market for flat-rolled products. The book also examines how minimills--such as Nucor, Birmingham Steel, Oregon Steel, Tokyo Steel, and Co-Steel Sheerness--have redefined the industry's structure and competitive dynamics. Nucor, in particular, has emerged as the leader among the minimills--the largest electric furnace-based steel company in the U.S., with annual sales exceeding $3 billion. The reader learns how CEO Ken Iverson, recognizing the opportunities to be seized if Nucor moved beyond traditional products (such as steel joists and rebar), created the most innovative steel mill in the world, with a consistent record of investing in new technologies to lower operating costs and to move into sophisticated, value-added products. Throughout the book, the authors offer sharp insights into the steel industry in the U.S. and abroad--but more important, they highlight the lessons to be learned for managers in all industries. The authors conclude, for instance, that success for both large and small steel producers depends on a critical interplay of factors that touch on leadership, new technologies, and decentralized management. Effective leaders, the authors find, don't micromanage; they set a goal for the company and communicate it broadly to gain employees' commitment. High-performing companies aggressively seek technical know-how, even if it means purchasing it from foreign competitors or securing joint agreements. And finally, successful companies decentralize, empowering employees far down in the organization to handle daily decisionmaking. This in-depth analysis of a radically changed industry speaks volumes about the value of flexibility in business. It is an essential resource for any manager working in today's global economy.
Download or read book International Trade written by United States. General Accounting Office and published by . This book was released on 1989 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Steel written by Richard Preston and published by Prentice Hall. This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The story of Nucor's billion dollar gamble to build a steel mill in Crawfordsville, Indiana.
Download or read book A Nation of Steel written by Thomas J. Misa and published by JHU Press. This book was released on 1998-09-04 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the age of railroads through the building of the first battleships, from the first skyscrapers to the dawning of the age of the automobile, steelmakers proved central to American industry, building, and transportation. In A Nation of Steel Thomas Misa explores the complex interactions between steelmaking and the rise of the industries that have characterized modern America. A Nation of Steel offers a detailed and fascinating look at an industry that has had a profound impact on American life.
Download or read book International Trade written by and published by . This book was released on 1989 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Problems of the U S Steel Industry written by United States. Congress. House. Committee on Ways and Means. Subcommittee on Trade and published by . This book was released on 1984 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Economic History of the American Steel Industry written by and published by Routledge. This book was released on with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Competitive Status of the U S Steel Industry written by National Research Council and published by National Academies Press. This book was released on 1985-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume examines the influences of technology and international trade policies on the troubled U.S. steel industry. Does leadership in technology guarantee competitive advantage in industrial markets? Or do the costs of production and the lack of investment capital offset technological gains for the domestic steel industry? Which international trade policies can help this industry, and which may be harming it? With these and other questions in view, The Competitive Status of the U.S. Steel Industry estimates global trends in steel trade, discusses patterns of production and consumption, and analyzes the possible effects of alternative governmental policies on this critically important industry.
Download or read book The U S Steel Industry in Recurrent Crisis written by Robert Crandall and published by Brookings Institution Press. This book was released on 2011-12-01 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the current difficulties facing the U.S. steel industry and policy options to tackle them.
