Download or read book Theory of Machines written by RS Khurmi | JK Gupta and published by S. Chand Publishing. This book was released on 2005 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: While writing the book,we have continuously kept in mind the examination requirments of the students preparing for U.P.S.C.(Engg. Services)and A.M.I.E.(I)examinations.In order to make this volume more useful for them,complete solutions of their examination papers up to 1975 have also been included.Every care has been taken to make this treatise as self-explanatory as possible.The subject matter has been amply illustrated by incorporating a good number of solved,unsolved and well graded examples of almost every variety.
Download or read book Theory of Machines and Mechanisms written by John Joseph Uicker and published by Oxford University Press, USA. This book was released on 2003 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Machines and Mechanisms, Third Edition, is a comprehensive study of rigid-body mechanical systems and provides background for continued study in stress, strength, fatigue, life, modes of failure, lubrication and other advanced aspects of the design of mechanical systems. This third edition provides the background, notation, and nomenclature essential for students to understand the various and independent technical approaches that exist in the field of mechanisms, kinematics, and dynamics of machines. The authors employ all methods of analysis and development, with balanced use of graphical and analytic methods. New material includes an introduction of kinematic coefficients, which clearly separates kinematic (geometric) effects from speed or dynamic dependence. At the suggestion of users, the authors have included no written computer programs, allowing professors and students to write their own and ensuring that the book does not become obsolete as computers and programming languages change. Part I introduces theory, nomenclature, notation, and methods of analysis. It describes all aspects of a mechanism (its nature, function, classification, and limitations) and covers kinematic analyses (position, velocity, and acceleration). Part II shows the engineering applications involved in the selection, specification, design, and sizing of mechanisms that accomplish specific motion objectives. It includes chapters on cam systems, gears, gear trains, synthesis of linkages, spatial mechanisms, and robotics. Part III presents the dynamics of machines and the consequences of the proposed mechanism design specifications. New dynamic devices whose functions cannot be explained or understood without dynamic analysis are included. This third edition incorporates entirely new chapters on the analysis and design of flywheels, governors, and gyroscopes.
Download or read book The Theory Of Machines Through Solved Problems written by J. S. Rao and published by New Age International. This book was released on 2007 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Theory Of Machines Or Mechanism And Machine Theory Is A Basic Subject Taught In Engineering Schools To Mechanical Engineering Students. This Subject Lays The Foundation On Which Mechanical Engineering Design And Practice Rests With. It Is Also A Subject Taught When The Students Have Just Entered Engineering Discipline And Are Yet To Formulate Basics Of Mechanical Engineering. This Subject Needs A Lost Of Practice In Solving Engineering Problems And There Is Currently No Good Book Explaining The Subject Through Solved Problems. This Book Is Written To Fill Such A Void And Help The Students Preparing For Examinations. It Contains In All 336 Solved Problems, Several Illustrations And 138 Additional Problems For Practice. Basic Theory And Background Is Presented, Though It Is Not Like A Full Fledged Text Book In That Sense.This Book Contains 20 Chapters, The First One Giving A Historical Background On The Subject. The Second Chapter Deals With Planar Mechanisms Explaining Basic Concepts Of Machines. Kinematic Analysis Is Given In Chapter 3 With Graphical As Well As Analytical Tools. The Synthesis Of Mechanisms Is Given In Chapter 4. Additional Mechanisms And Coupler Curve Theory Is Presented In Chapter 5. Chapter 6 Discusses Various Kinds Of Cams, Their Analysis And Design. Spur Gears, Helical Gears, Worm Gears And Bevel Gears And Gear Trains Are Extensively Dealt With In Chapters 7 To 9. Hydrodynamic Thrust And Journal Bearings (Long And Short Bearings) Are Considered In Chapter 10.Static Forces, Inertia Forces And A Combined Force Analysis Of Machines Is Considered In Chapters 11 To 13. The Turning Moment And Flywheel Design Is Given In Chapter 14. Chapters 15 And 16 Deal With Balancing Of Rotating Parts, Reciprocating Parts And Four Bar Linkages. Force Analysis Of Gears And Cams Is Dealt With In Chapter 17. Chapter 18 Is Concerned With Mechanisms Used In Control, Viz., Governors And Gyroscopes. Chapters 19 And 20 Introduce Basic Concepts Of Machine Vibrations And Critical Speeds Of Machinery.A Special Feature Of This Book Is The Availability Of Three Computer Aided Learning Packages For Planar Mechanisms, Their Analysis And Animation, For Analysis Of Cams With Different Followers And Dynamics Of Reciprocating Machines, Balancing And Flywheel Analysis.
Download or read book Theory of Machines 3 e written by Thomas Bevan and published by Pearson Education India. This book was released on 2010 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Machines written by Shivendra Nandan and published by TSG Publications. This book was released on with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject theory of machine may be defined as that branch of engineering science which deals with the study of relative motion both the various parts of m/c and forces which act on them.
Download or read book Theory of Machines written by B. V. R. Gupta and published by I. K. International Pvt Ltd. This book was released on 2010-11 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Theory of Machines is an important subject to mechanical engineering students of both bachelor s and diploma level. One has to understand the basics of kinematics and dynamics of machines before designing and manufacturing any component. The subject m
Download or read book The Kinematics of Machinery Outlines of a Theory of Machines written by Franz Reuleaux and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Fundamentals of Machine Theory and Mechanisms written by Antonio Simón Mata and published by Springer. This book was released on 2016-05-27 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the basic content for an introductory course in Mechanism and Machine Theory. The text is clear and simple, supported by more than 350 figures. More than 60 solved exercises have been included to mark the translation of this book from Spanish into English. Topics treated include: dynamic analysis of machines; introduction to vibratory behavior; rotor and piston balanced; critical speed for shafts; gears and train gears; synthesis for planar mechanisms; and kinematic and dynamic analysis for robots. The chapters in relation to kinematics and dynamics for planar mechanisms can be studied with the help of WinMecc software, which allows the reader to study in an easy and intuitive way, but exhaustive at the same time. This computer program analyzes planar mechanisms of one-degree of freedom and whatever number of links. The program allows users to build a complex mechanism. They can modify any input data in real time changing values in a numeric way or using the computer mouse to manipulate links and vectors while mechanism is moving and showing the results. This powerful tool does not only show the results in a numeric way by means of tables and diagrams but also in a visual way with scalable vectors and curves.
Download or read book Advanced Theory of Mechanisms and Machines written by M.Z. Kolovsky and published by Springer Science & Business Media. This book was released on 2012-09-03 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new approach to the theory of mechanisms and machines, based on a lecture course for mechanical engineering students at the St. Petersburg State Technical University. The material differs from traditional textbooks due to its more profound elaboration of the methods of structural, geometric, kinematic and dynamic analysis. These established and novel methods take into account the needs of modern machine design as well as the potential of computers.
Download or read book Mechanism and Machine Theory written by J. S. Rao and published by bohem press. This book was released on 2007 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Evolved Itself Out Of 25 Years Of Teaching Experience In The Subject, Moulding Different Important Aspects Into A One Year Course Of Mechanism And Machine Theory. Basic Principles Of Analysis And Synthesis Of Mechanisms With Lower And Higher Pairs Are Both Included Considering Both Kinematic And Kinetic Aspects. A Chapter On Hydrodynamic Lubrication Is Included In The Book. Balancing Machines Are Introduced In The Chapter On Balancing Of Rotating Parts. Mechanisms Used In Control Namely, Governors And Gyroscopes Are Discussed In A Separate Chapter. The Book Also Contains A Chapter On Principles Of Theory Of Vibrations As Applied To Machines. A Solution Manual To Problems Given At The End Of Each Chapter Is Also Available. Principles Of Balancing Of Linkages Is Also Included. Thus The Book Takes Into Account All Aspects Of Mechanism And Machine Theory To The Reader Studying A First Course On This Subject.This Book Is Intended For Undergraduate Students Taking Basic Courses In Mechanism And Machine Theory. The Practice Of Machines Has Been Initially To Use Inventions And Establishment Of Basic Working Models And Then Generalising The Theory And Hence The Earlier Books Emphasises These Principles. With The Advancement Of Theory Particularly In The Last Two Decades, New Books Come Up With A Stress On Specific Topics.The Book Retains All The Aspects Of Mechanism And Machine Theory In A Unified Manner As Far As Possible For A Two Semester Course At Undergraduate Level Without Recourse To Following Several Text Books And Derive The Benefits Of Basic Principles Recently Advanced In Mechanism And Machine Theory.
Download or read book Theory of Machines Kinematics and Dynamics written by Sadhu Singh and published by Pearson Education India. This book was released on 2012 with total page 1393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Theory of Machines: Kinematics and Dynamics comprehensively covers theory of machines for undergraduate students of Mechanical and Civil Engineering. The main objective of the book is to present the concepts in a logical, innovative and lucid manner with easy to understand illustrations and diagrams; the book is a treasure in itself for Mechanical Engineers.
Download or read book Mechanics of Machines written by Viswanatha Ramamurti and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Emphasizes the industrial relevance of the subject matter, dispenses with conventional inaccurate graphical methods used in Kinematics of plane mechanisms, cams and balancing. Instead presents general vector approach for both plane and space mechanisms."--BOOK JACKET.
Download or read book Mechanics of Machines written by Geoffrey Harwood Ryder and published by Industrial Press Inc.. This book was released on 1990 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Brief Illustrated History of Machines and Mechanisms written by Emilio Bautista Paz and published by Springer Science & Business Media. This book was released on 2010-08-02 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machines have always gone hand-in-hand with the cultural development of m- kind throughout time. A book on the history of machines is nothing more than a specific way of bringing light to human events as a whole in order to highlight some significant milestones in the progress of knowledge by a complementary persp- tive into a general historical overview. This book is the result of common efforts and interests by several scholars, teachers, and students on subjects that are connected with the theory of machines and mechanisms. In fact, in this book there is a certain teaching aim in addition to a general historical view that is more addressed to the achievements by “homo faber” than to those by “homo sapiens”, since the proposed history survey has been developed with an engineering approach. The brevity of the text added to the fact that the authors are probably not com- tent to tackle historical studies with the necessary rigor, means the content of the book is inevitably incomplete, but it nevertheless attempts to fulfil three basic aims: First, it is hoped that this book may provide a stimulus to promote interest in the study of technical history within a mechanical engineering context. Few are the co- tries where anything significant is done in this area, which means there is a general lack of knowledge of this common cultural heritage.
Download or read book Kinematics of Machinery Through HyperWorks written by J.S. Rao and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of moving machine members during a thermodynamic cycle and the variation of displacements, velocities and accelerations forms the subject of kinematics.The study of forces that make the motion is the subject of kinetics; combining these two subjects leads to dynamics of machinery. When we include the machinery aspects such as links, kinematic chains, and mechanisms to form a given machine we have the subject of Theory of Machines. Usually this subject is introduced as a two-semester course, where kinematics and kinetics are taught simultaneously with thermodynamics or heat engines before progressing to the design of machine members. This book provides the material for first semester of a Theory of Machines- course. Th is book brings in the machine live onto the screen and explains the theory of machines concepts through animations and introduces how the problems are solved in industry to present a complete history in the shortest possible time rather than using graphical (or analytical) methods. Thus the students are introduced to the concepts through visual means which brings industrial applications by the end of the two semester program closer, and equips them better for design courses. The International Federation for promotion of Mechanism and Machine Science (IFToMM) has developed standard nomenclature and notation on Mechanism and Machine Science and this book adopts these standards so that any communication between scientists and in the classrooms across the world can make use of the same terminology. This book adopts HyperWorks MotionSolve to perform the analysis and visualizations, though the book can be used independent of the requirement of any particular software. However, having this software helps in further studies and analysis. The avis can be seen by entering the ISBN of this book at the Springer Extras website at extras.springer.com
Download or read book Dynamics of Machinery written by Hans Dresig and published by Springer Science & Business Media. This book was released on 2010-07-27 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic loads and undesired oscillations increase with higher speed of machines. At the same time, industrial safety standards require better vibration reduction. This book covers model generation, parameter identification, balancing of mechanisms, torsional and bending vibrations, vibration isolation, and the dynamic behavior of drives and machine frames as complex systems. Typical dynamic effects, such as the gyroscopic effect, damping and absorption, shocks, resonances of higher order, nonlinear and self-excited vibrations are explained using practical examples. These include manipulators, flywheels, gears, mechanisms, motors, rotors, hammers, block foundations, presses, high speed spindles, cranes, and belts. Various design features, which influence the dynamic behavior, are described. The book includes 60 exercises with detailed solutions. The substantial benefit of this "Dynamics of Machinery" lies in the combination of theory and practical applications and the numerous descriptive examples based on real-world data. The book addresses graduate students as well as engineers.
Download or read book Mechanism and Machine Theory written by J. S. Rao and published by John Wiley & Sons. This book was released on 1989 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A sound background for solving many of the practical design problems faced by mechanical engineers is provided in this classroom-tested text. Each chapter comprises a concise, but thorough, fundamental statement of the theory, principles, and practice of mechanism and machine theory, followed by illustrative worked examples. The text covers elementary mechanisms, coupler curves, gear trains, lubrication, static and inertia force analysis, balancing of reciprocating components, and much more. Many exercises are included.
