Download or read book The Testability of Distributed Real Time Systems written by Werner Schütz and published by Springer Science & Business Media. This book was released on 2007-07-23 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: BY H. KOPETZ A real-time computer system must provide the intended service in two di mensions: the functional (value) dimension and the temporal dimension. The verification of a real-time system implementation is thus necessarily more com plex than the verification of a non-real-time system which has to be checked in the value dimension only. Since the formal verification techniques of temporal properties have not yet matured to the point where these techniques can be used in practical system development, systematic design and testing are the only alternatives for the development of dependable real-time systems. At present, up to and more than fifty percent of the development eff'ort of complex real-time computer systems is spent on testing. The test activities are thus a significant cost element in any real-time system project. The attack on this cost element has to proceed from two fronts: the design for testability and the development of a systematic test methodology supported by an appropriate tool set. This book covers both of these topics.
Download or read book Distributed Real Time Systems written by K. Erciyes and published by Springer. This book was released on 2019-07-23 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classroom-tested textbook describes the design and implementation of software for distributed real-time systems, using a bottom-up approach. The text addresses common challenges faced in software projects involving real-time systems, and presents a novel method for simply and effectively performing all of the software engineering steps. Each chapter opens with a discussion of the core concepts, together with a review of the relevant methods and available software. This is then followed with a description of the implementation of the concepts in a sample kernel, complete with executable code. Topics and features: introduces the fundamentals of real-time systems, including real-time architecture and distributed real-time systems; presents a focus on the real-time operating system, covering the concepts of task, memory, and input/output management; provides a detailed step-by-step construction of a real-time operating system kernel, which is then used to test various higher level implementations; describes periodic and aperiodic scheduling, resource management, and distributed scheduling; reviews the process of application design from high-level design methods to low-level details of design and implementation; surveys real-time programming languages and fault tolerance techniques; includes end-of-chapter review questions, extensive C code, numerous examples, and a case study implementing the methods in real-world applications; supplies additional material at an associated website. Requiring only a basic background in computer architecture and operating systems, this practically-oriented work is an invaluable study aid for senior undergraduate and graduate-level students of electrical and computer engineering, and computer science. The text will also serve as a useful general reference for researchers interested in real-time systems.
Download or read book Real Time and Distributed Real Time Systems written by Amitava Gupta and published by CRC Press. This book was released on 2016-04-27 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital computers have revolutionized computation and transformed how computers are used to control systems in real life, giving birth to real-time systems. Furthermore, massive developments in the communications domain have made it possible for real-time systems to perform coordinated actions over communication interfaces, resulting in the evoluti
Download or read book Real Time Systems written by Albert M. K. Cheng and published by John Wiley & Sons. This book was released on 2003-03-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a comprehensive overview of the subject rather than a collection of papers. The author is a recognized authority in the field as well as an outstanding teacher lauded for his ability to convey these concepts clearly to many different audiences. A handy reference for practitioners in the field.
Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Download or read book Design and Analysis of Distributed Embedded Systems written by Bernd Kleinjohann and published by Springer. This book was released on 2013-04-17 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.
Download or read book Active Real Time and Temporal Database Systems written by Sten F. Andler and published by Springer. This book was released on 2003-06-26 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Database systems of the next generation are likely to be inherently very complex due to the diversity of requirements placed on them. Incorporating active, real time, and temporal virtues in one database system is an arduous effort but is also a commend able one. This book presents the proceedings of the Second International Workshop on Active, Real Time, and Temporal Database Systems (ARTDB 97), held in Como, Milan, in September 1997. The aim of the workshop was to bring researchers together from the active and real time research communities, and to examine the current state of the art in active, real time, and temporal database systems. This book offers a collection of papers presented at the ARTDB 97 workshop. The papers, many of them representing proficient and tenable results, illuminate the feasibility of building database system supporting reactive behavior, while enforcing timeliness and predictability. The book contains nine papers carefully reviewed and accepted by the program committee, three invited papers written by prominent researchers in the field, and two summaries of the panel discussions held at the workshop. The program committee received seventeen submissions, where each submission was reviewed by at least three program committee members. The two panel sessions focused on predictability issues and on practical experience of active, real time, and temporal database systems. The ARTDB 97 workshop was held in cooperation with the IEEE Technical Committees on Real Time Systems and Complexity in Computing, and the ACM Special Interest Group on Manipulation of Data.
Download or read book Predictably Dependable Computing Systems written by Brian Randell and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Computer Control Systems 1995 written by A.E.K. Sahraoui and published by Elsevier. This book was released on 2014-05-23 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series of IFAC Workshops on distributed computer control systems (DCCS) provide the opportunity for leading researchers and practitioners in the field to discuss and evaluate recent advances and current issues in theory, applications and technology of DCCS. DCCS'95, the 13th IFAC workshop in the series was held in Toulouse-Blagnac, France. The topics covered at this meeting included: the role of real-time in DCCS specifications; scheduling methods for DCCS; real-time distributed operating systems and databases and industrial applications and experience with DCSS.
Download or read book Fault Tolerant Real Time Systems written by Stefan Poledna and published by Springer Science & Business Media. This book was released on 2007-11-23 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time computer systems are very often subject to dependability requirements because of their application areas. Fly-by-wire airplane control systems, control of power plants, industrial process control systems and others are required to continue their function despite faults. Fault-tolerance and real-time requirements thus constitute a kind of natural combination in process control applications. Systematic fault-tolerance is based on redundancy, which is used to mask failures of individual components. The problem of replica determinism is thereby to ensure that replicated components show consistent behavior in the absence of faults. It might seem trivial that, given an identical sequence of inputs, replicated computer systems will produce consistent outputs. Unfortunately, this is not the case. The problem of replica non-determinism and the presentation of its possible solutions is the subject of Fault-Tolerant Real-Time Systems: The Problem of Replica Determinism. The field of automotive electronics is an important application area of fault-tolerant real-time systems. Systems like anti-lock braking, engine control, active suspension or vehicle dynamics control have demanding real-time and fault-tolerance requirements. These requirements have to be met even in the presence of very limited resources since cost is extremely important. Because of its interesting properties Fault-Tolerant Real-Time Systems gives an introduction to the application area of automotive electronics. The requirements of automotive electronics are a topic of discussion in the remainder of this work and are used as a benchmark to evaluate solutions to the problem of replica determinism.
Download or read book Design Guidelines for a Monitoring Environment Concerning Distributed Real time Systems written by Aida Omerovic and published by Fagbokforlaget. This book was released on 2004 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the dependability requirements of distributed real-time systems are expanding, there is currently no framework for defining and mapping these requirements into the system design and operation. A method of controlling and achieving the dependability level is real-time monitoring, which measures the degree of requirements fulfilment, relates it to the pre-defined, measurable system-level expectations and dynamically adapts the system, based on quality metrics, risk analysis, cost evaluation, control theory, neural networks, data acquisition and system knowledge management. The book deduces a framework to reveal, define, quantify, measure, analyse, design, implement, test, monitor and enhance dependability (functional and non-functional) requirements of a distributed system with real-time constraints. It is presented how the framework can be applied throughout all life-cycle stages, under varying constraints and with maximised cost effectiveness. An overview of the tools and methodologies applicable has been given and an integrated and generalised architecture for ensuring continuous fulfilment of system requirements, proposed. The framework provides a multilevel specification mechanism to establish the preservation of system requirements. This ensures the correct functioning of system through adaptations at run time. Among the benefits are controlled access and coordinated resource sharing in accordance with service-level agreement policies, multi-stakeholder interest preservation, transparency with respect to location, naming, performance etc., achievement of quality of service on demand, decentralisation, seamless integration of resources and applications, as well as increased predictability. READERSHIP: The intended audience is broad: real time and distributed systems scientists and developers, software engineers, students, quality assurance managers, contractors, users, service providers and all those searching for an alternative approach to handling and ensuring automated control of fulfilment of system requirements. Moreover, those needing a handbook on contract negotiations and a method of tracing operational results back into system requirements of long lived projects with high dependability and integrity demands.
Download or read book Advances in Real Time Systems written by Samarjit Chakraborty and published by Springer Science & Business Media. This book was released on 2012-02-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures given in honor to Georg Färber as tribute to his contributions in the area of real-time and embedded systems. The chapters of many leading scientists cover a wide range of aspects, like robot or automotive vision systems or medical aspects.
Download or read book Deadline Scheduling for Real Time Systems written by John A. Stankovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many real-time systems rely on static scheduling algorithms. This includes cyclic scheduling, rate monotonic scheduling and fixed schedules created by off-line scheduling techniques such as dynamic programming, heuristic search, and simulated annealing. However, for many real-time systems, static scheduling algorithms are quite restrictive and inflexible. For example, highly automated agile manufacturing, command, control and communications, and distributed real-time multimedia applications all operate over long lifetimes and in highly non-deterministic environments. Dynamic real-time scheduling algorithms are more appropriate for these systems and are used in such systems. Many of these algorithms are based on earliest deadline first (EDF) policies. There exists a wealth of literature on EDF-based scheduling with many extensions to deal with sophisticated issues such as precedence constraints, resource requirements, system overload, multi-processors, and distributed systems. Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms aims at collecting a significant body of knowledge on EDF scheduling for real-time systems, but it does not try to be all-inclusive (the literature is too extensive). The book primarily presents the algorithms and associated analysis, but guidelines, rules, and implementation considerations are also discussed, especially for the more complicated situations where mathematical analysis is difficult. In general, it is very difficult to codify and taxonomize scheduling knowledge because there are many performance metrics, task characteristics, and system configurations. Also, adding to the complexity is the fact that a variety of algorithms have been designed for different combinations of these considerations. In spite of the recent advances there are still gaps in the solution space and there is a need to integrate the available solutions. For example, a list of issues to consider includes: preemptive versus non-preemptive tasks, uni-processors versus multi-processors, using EDF at dispatch time versus EDF-based planning, precedence constraints among tasks, resource constraints, periodic versus aperiodic versus sporadic tasks, scheduling during overload, fault tolerance requirements, and providing guarantees and levels of guarantees (meeting quality of service requirements). Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms should be of interest to researchers, real-time system designers, and instructors and students, either as a focussed course on deadline-based scheduling for real-time systems, or, more likely, as part of a more general course on real-time computing. The book serves as an invaluable reference in this fast-moving field.
Download or read book Embedded Systems Handbook 2 Volume Set written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-08 with total page 1503 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years there has been an dramatic upsurge in research and development, implementations of new technologies, and deployments of actual solutions and technologies in the diverse application areas of embedded systems. These areas include automotive electronics, industrial automated systems, and building automation and control. Comprising 48 chapters and the contributions of 74 leading experts from industry and academia, the Embedded Systems Handbook, Second Edition presents a comprehensive view of embedded systems: their design, verification, networking, and applications. The contributors, directly involved in the creation and evolution of the ideas and technologies presented, offer tutorials, research surveys, and technology overviews, exploring new developments, deployments, and trends. To accommodate the tremendous growth in the field, the handbook is now divided into two volumes. New in This Edition: Processors for embedded systems Processor-centric architecture description languages Networked embedded systems in the automotive and industrial automation fields Wireless embedded systems Embedded Systems Design and Verification Volume I of the handbook is divided into three sections. It begins with a brief introduction to embedded systems design and verification. The book then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Networked Embedded Systems Volume II focuses on selected application areas of networked embedded systems. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems.
Download or read book Embedded Systems Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-09-03 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area of computer engineering with a currently appropriate emphasis on developments in networking and applications. Those experts directly involved in the creation and evolution of the ideas and technologies presented offer tutorials, research surveys, and technology overviews that explore cutting-edge developments and deployments and identify potential trends. This first self-contained volume of the handbook, Embedded Systems Design and Verification, is divided into three sections. It begins with a brief introduction to embedded systems design and verification. It then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Those interested in taking their work with embedded systems to the network level should complete their study with the second volume: Network Embedded Systems.
Download or read book Introduction to Software Testing written by Paul Ammann and published by Cambridge University Press. This book was released on 2008-01-28 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively class-tested, this textbook takes an innovative approach to software testing: it defines testing as the process of applying a few well-defined, general-purpose test criteria to a structure or model of the software. It incorporates the latest innovations in testing, including techniques to test modern types of software such as OO, web applications, and embedded software. The book contains numerous examples throughout. An instructor's solution manual, PowerPoint slides, sample syllabi, additional examples and updates, testing tools for students, and example software programs in Java are available on an extensive website.
Download or read book Real Time Database Systems written by Kam-Yiu Lam and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, tremendous research has been devoted to the design of database systems for real-time applications, called real-time database systems (RTDBS), where transactions are associated with deadlines on their completion times, and some of the data objects in the database are associated with temporal constraints on their validity. Examples of important applications of RTDBS include stock trading systems, navigation systems and computer integrated manufacturing. Different transaction scheduling algorithms and concurrency control protocols have been proposed to satisfy transaction timing data temporal constraints. Other design issues important to the performance of a RTDBS are buffer management, index accesses and I/O scheduling. Real-Time Database Systems: Architecture and Techniques summarizes important research results in this area, and serves as an excellent reference for practitioners, researchers and educators of real-time systems and database systems.