Download or read book The Teaching of Manual Arts Classic Reprint written by Fred D. Crawshaw and published by Forgotten Books. This book was released on 2016-08-24 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Teaching of Manual Arts The courses of study contained herein are not alone the individual drafts of the authors, but are the result of revi sions and combinations of courses of study made and adopted by different associations which have given special attention to such courses during the past few years. The courses pre sented are suggestive only and should be regarded as such. They should express close coordination in the handling of all manual arts materials. The illustrations are introduced as a supplementary text. They suggest the type of work considered in the courses of study outlined and represent good examples of present day design and construction. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Manual Arts written by Charles Alpheus Bennett and published by . This book was released on 1917 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Books on the Manual Arts Classic Reprint written by and published by Forgotten Books. This book was released on 2018-02-14 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Books on the Manual Arts The purpose of this book is to assist teachers in securing the best, and just the books on the manual arts, which are suited to their needs. The description given is necessarily brief. Should additional information be desired, this will be freely given and without cost or obligation. If requested, assistance will also be given in the selection of textbooks, reference books, and manuals for both teachers' and students' use. The Subject Index on page 3 and the Author and Title Index on page 60 will be found convenient helps in locating titles of Interest. To instructors in normal schools and colleges, additional copies of this book will be mailed free for distribution to interested stu dents With your request, state the number you can use to advantage. Book News, published periodically by the manual arts press, contains news regarding publications which have appeared since the last issue of on the Manual Arts. It will be mailed free as published to any address. Send us a post card, and your name will be placed on the mailing list. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Manual Arts Classic Reprint written by Charles A. Bennett and published by . This book was released on 2015-07-09 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Manual Arts The greatest present problems affecting the manual arts in education, whether that education be vocational or cultural in its aim, are centered around the selection and organization of subject-matter and methods of teaching. Believing this to be true, the author contributes the following chapters to the discussion of these problems, hoping that they may be of some service to his fellow workers. Several of the chapters have previously appeared as articles in magazines. When brought together, however, they have a significance which they did not possess as isolated articles appearing from time to time over a period of several years. Acknowledgment for permission to republish is due to Education, Educational Review, Vocational Education and Manual Training Magazine. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Teaching of Manual Arts written by Fred D B 1874 Crawshaw and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic text on the pedagogy of manual arts, including woodworking, metalworking, drafting, and other skilled trades. The book provides a comprehensive overview of the philosophy, methods, and techniques of manual arts instruction, and is an invaluable resource for teachers and educators. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book The Teaching of Manual Arts written by Fred D B 1874 Crawshaw and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic text on the pedagogy of manual arts, including woodworking, metalworking, drafting, and other skilled trades. The book provides a comprehensive overview of the philosophy, methods, and techniques of manual arts instruction, and is an invaluable resource for teachers and educators. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Manual Arts Public School Manual Arts an Agency for Vocational Education Classic Reprint written by F. D. Crawshaw and published by Forgotten Books. This book was released on 2018-02-08 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Manual Arts Public School Manual Arts an Agency, for Vocational Education However this may be, one feature of either of the two plans sug gested should be emphasized as imperative, viz: Put the-special work followed by the pupil in his senior year under the supervision. Of the leaders in the industry represented. I do not believe we shall ever get industrial conditions to obtain in the school if school men are permitted to organize the work of industrial courses, nu less they have had the special industrial training needed. On the other hand, I maintain that the executive heads in the school sys tem must remain in general control. Germany and England give us our best illustration of what can be done in this direction - by demonstrating the sanest kind of cooperation between the school and the industrial leaders. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Manual Arts for Vocational Ends Classic Reprint written by Fred D. Crawshaw and published by . This book was released on 2015-07-06 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Manual Arts for Vocational Ends The agitation of industrial education during the past few years has made all teachers of the manual arts in elementary and grammar grades, as well as in the high school, consider the question of the sufficiency of their subject and the efficiency of their teaching. If the manual arts were first introduced into the public schools for the purpose of making boys and girls more efficient, community workers and if, after twenty-five years of instruction in the manual arts, it is found that boys and. girls are still unable, when they leave school, to meet reasonable community demands, then something should be done to change this condition. Certainly the public schools should be held responsible for an education which will enable the youth of our land to perform a service upon leaving school immediately profitable both to themselves and to the community at large. If one is to receive a profitable return from a wage-earning occupation he must prepare particularly to do A what is required of those engaged in the occupation. A, vocational tendency, therefore, must obtain somewhere in the process of education. Inasmuch as the large majority of those at any time enrolled in the public schools must find a means of livelihood early in life, it is imperative that the public schools, even in the lower grades, offer an opportunity for vocational work. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Teaching Manual and Industrial Arts written by Ira Samuel Griffith and published by . This book was released on 2015-07-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Teaching Manual and Industrial Arts: A d104book for Normal Schools and Colleges Teaching Manual and Industrial Arts is intended as a text for use in normal schools and colleges. Its primary aim is to assist in the making of necessary connections between the more general courses in educational psychology and theory of teaching and the special work of practice teaching in manual and industrial arts. While the discussions of the text largely presuppose a knowledge of psychology as a prerequisite, mature students and experienced teachers of the manual or industrial arts who have had no psychology may be expected to pursue the reading of the text successfully by devoting somewhat more time and attention to the reference readings suggested at the close of each chapter. Some experience with manual or industrial arts subject-matter is necessary for an appropriate appreciation of the discussions of the text. Lest the author be accused of inconsistency in the matter of his choice of philosophical bases for the various discussions, he would state that he has intentionally made use of both the analogies of dualism and of the conception of contiguity and continuity. (Cf. Dewey's "Democracy and Education," especially Chapter XXV.) The accompanying charts should make clear the grounds for justification assumed by the author in the matter of bases. Why there should of necessity be considered any lack of contiguity and continuity in the conception of dualism, and vice versa, philosophy has not been able to prove. (Cf. "Dualism," The New International Encyclopaedia for a brief statement.) About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Copper Work written by Augustus F. Rose and published by Forgotten Books. This book was released on 2017-11-08 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Copper Work: An Illustrated d104 Book for Teachers and Students in the Manual Arts During the past few years many experiments have been tried in the development of Manual Training Courses and much time has been spent in discussing of what lines of work they should consist. Wood and iron were the first materials used and are yet indispensable, but experience has led those who are developing this work to believe that there are other materials as well adapted to Manual Train ing work in all its various forms. Clay, used not only for modeling but for ceramic work as well, leather, brass, and copper are materials that have also been put to the test and found satisfactory in many ways. In ancient times copper was known as a useful metal, and down through the ages it not only held its own but increased in usefulness. Among its valuable properties may be mentioned toughness and ductility; its toughness enables it to be beaten into thin strong sheets, while its ductility enables it to be drawn out into fine wire. Copper readily forms important alloys, such as brass from copper and zinc. Work in sheet copper and brass has been introduced into the public school course with gratifying results. It has proved itself to be a valuable departure from other branches of Manual Training work and gives promise of being per manent. Sheet copper and brass offer possibilities for various kinds of treatment, either in the flat work which includes saw piercing, embossing and enameling, or in the raised work. There is something about this work that appeals to pupils and holds their interest. The nature of the material, hard enough to offer some resistance and yet pliable enough to allow its being wrought into many forms, the durability of the object when completed, and the variety of colors that may be obtained, especially with copper, all tend to make the subject not only interesting but fascinating. All exercises in sheet metal should be of some real value to the pupil; no time should be spent on work done simply for practice, but the various steps should be learned in the making of useful objects of artistic worth. In this, as in other work, it seems best to give each member of the class the same work for a while until he has become acquainted with the different tools and learned the limita tions of the material. When this has been accomplished, each pupil may be allowed to work out his own designs. In this the educational value is very greatly increased. The pupil conceives the idea and makes several sketches of it, carrying it through repeated changes until it is brought to the perfected design appropriate in every way to the idea. Some may not be fortunate enough to get a full equipment so that all of the various kinds of metal work may be done, but such may be able to make a beginning by doing light work in saw piercing, which requires a very limited equipment. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Educational Meaning of Manual Arts and Industries Classic Reprint written by Robert Keable Row and published by Forgotten Books. This book was released on 2017-12-02 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Educational Meaning of Manual Arts and Industries Swedish 'sloyd - French System - Introduction into the United States - Conception of Work - Narrow Views. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Bibliography of the Manual Arts Classic Reprint written by Arthur Henry Chamberlain and published by Forgotten Books. This book was released on 2017-10-17 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Bibliography of the Manual Arts These can only be had in private or public libraries. Some of these treatises and reports are, indeed, of the very best. One of the chief values claimed for the bibliography lies in the comments following certain of the titles, thus rendering the selection of a book less a matter of guess work than would otherwise be the case. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book TEACHING OF MANUAL ARTS written by Fred D. (Fred Duane) B. 1874 Crawshaw and published by Wentworth Press. This book was released on 2016-08-27 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Catalogue 1918 19 Announcement 1919 20 Classic Reprint written by West Tennessee State Normal School and published by Forgotten Books. This book was released on 2017-11-13 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Catalogue 1918-19, Announcement 1919-20 A. B. Miami University, 1910; Graduate of Manual Arts Department Ohio State Normal College, 1911; Head of Manual Arts Department and Director of Athletics in Eastern Kentucky State Normal School, 1910-12; present position since 1912. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book COPPER WORK written by AUGUSTUS F. ROSE and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standards in Manual Arts Drawing and Design Classic Reprint written by Fred Duane Crawshaw and published by Forgotten Books. This book was released on 2017-10-17 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Standards in Manual Arts, Drawing and Design Manual training as the term is used in this bulletin refers to the method by which industrial work is developed under school control. It signifies a plan by which hand, tool and machine work is made educative through a series of progressively developmental problems. Manual arts as herein used indicates the content of the several subjects which are included in a division of the school dealing with industrial work. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Year book of the Council of Supervisors of the Manual Arts written by Council of Supervisors of the Manual Arts and published by . This book was released on 1902 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
