Download or read book Nanocatalysis written by Vivek Polshettiwar and published by John Wiley & Sons. This book was released on 2013-09-30 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exhibiting both homogeneous and heterogeneous catalytic properties, nanocatalysts allow for rapid and selective chemical transformations, with the benefits of excellent product yield and ease of catalyst separation and recovery. This book reviews the catalytic performance and the synthesis and characterization of nanocatalysts, examining the current state of the art and pointing the way towards new avenues of research. Moreover, the authors discuss new and emerging applications of nanocatalysts and nanocatalysis, from pharmaceuticals to fine chemicals to renewable energy to biotransformations. Nanocatalysis features contributions from leading research groups around the world. These contributions reflect a thorough review of the current literature as well as the authors’ first-hand experience designing and synthesizing nanocatalysts and developing new applications for them. The book’s nineteen chapters offer a broad perspective, covering: Nanocatalysis for carbon-carbon and carbon-heteroatom coupling reactions Nanocatalysis for various organic transformations in fine chemical synthesis Nanocatalysis for oxidation, hydrogenation, and other related reactions Nanomaterial-based photocatalysis and biocatalysis Nanocatalysts to produce non-conventional energy such as hydrogen and biofuels Nanocatalysts and nano-biocatalysts in the chemical industry Readers will also learn about the latest spectroscopic and microscopy tools used in advanced characterization methods that shed new light on nanocatalysts and nanocatalysis. Moreover, the authors offer expert advice to help readers develop strategies to improve catalytic performance. Summarizing and reviewing all the most important advances in nanocatalysis over the last two decades, this book explains the many advantages of nanocatalysts over conventional homogeneous and heterogeneous catalysts, providing the information and guidance needed for designing green, sustainable catalytic processes.
Download or read book Nanocasting written by An-Hui Lu and published by Royal Society of Chemistry. This book was released on 2010 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials with tailored properties are regarded as a fundamental element in the development of future science and technology. Research is still ongoing into the nanosized construction elements required to create functional solids. The recently developed technique, nanocasting, has great advantage over others in terms of the synthesis of special nanostructured materials by the careful choice of suitable elements and nanoengineering steps. This new book summarizes the recent developments in nanocasting, including the principles of nanocasting, syntheses of novel nanostructured materials, characterization methods, detailed synthetic recipes and further possible development in this area. The book focuses on the synthesis of porous solids from the viewpoint of methodology and introduces the science of nanocasting from fundamental principles to their use in synthesis of various materials. It starts by outlining the principles of nanocasting, requirements to the templates and precursors and the tools needed to probe matter at the nanoscale level. It describes how to synthesize nano structured porous solids with defined characteristics and finally discusses the functionalization and application of porous solids. Special attention is given to new developments in this field and future perspectives. A useful appendix covering the detailed synthetic recipes of various templates including porous silica, porous carbon and colloidal spheres is included which will be invaluable to researchers wanting to follow and reproduce nanocast materials. Topics covered in the book include: * inorganic chemistry * organic chemistry * solution chemistry * sol-gel and interface science * acid-base equilibria * electrochemistry * biochemistry * confined synthesis The book gives readers not only an overview of nanocasting technology, but also sufficient information and knowledge for those wanting to prepare various nanostructured materials without needing to search the available literature.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2007 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinetics of Heterogeneous Catalytic Reactions written by Michel Boudart and published by Princeton University Press. This book was released on 2014-07-14 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a critical account of the principles of the kinetics of heterogeneous catalytic reactions in the light of recent developments in surface science and catalysis science. Originally published in 1984. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Nanoparticles in Catalysis written by Karine Philippot and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticles in Catalysis Discover an essential overview of recent advances and trends in nanoparticle catalysis Catalysis in the presence of metal nanoparticles is an important and rapidly developing research field at the frontier of homogeneous and heterogeneous catalysis. In Nanoparticles in Catalysis, accomplished chemists and authors Karine Philippot and Alain Roucoux deliver a comprehensive guide to the key aspects of nanoparticle catalysis, ranging from synthesis, activation methodology, characterization, and theoretical modeling, to application in important catalytic reactions, like hydrogen production and biomass conversion. The book offers readers a review of modern and efficient tools for the synthesis of nanoparticles in solution or onto supports. It emphasizes the application of metal nanoparticles in important catalytic reactions and includes chapters on activation methodology and supported nanoclusters. Written by an international team of leading voices in the field, Nanoparticles in Catalysis is an indispensable resource for researchers and professionals in academia and industry alike. Readers will also benefit from the inclusion of: A thorough introduction to New Trends in the Design of Metal Nanoparticles and Derived Nanomaterials for Catalysis An exploration of Dynamic Catalysis and the Interface Between Molecular and Heterogeneous Catalysts A practical discussion of Metal Nanoparticles in Water: A Relevant Toolbox for Green Catalysis Organometallic Metal Nanoparticles for Catalysis A concise treatment of the opportunities and challenges of CO2 Hydrogenation to Oxygenated Chemicals Over Supported Nanoparticle Catalysts Perfect for catalytic, organic, inorganic, and physical chemists, Nanoparticles in Catalysis will also earn a place in the libraries of chemists working with organometallics and materials scientists seeking a one-stop resource with expert knowledge on the synthesis and characterization of nanoparticle catalysis.
Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.
Download or read book Selectivity in Catalysis written by Mark E. Davis and published by . This book was released on 1993 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses recent research and provides tutorial chapters on enhancing selectivity in catalysis through stereoselectivity, reaction pathway control, shape selectivity, and alloys and clusters. Presents an interdisciplinary approach to increasing selectivity in homogeneous and heterogeneous catalysis research. Includes an overview chapter that discusses the current state of the field and offers a perspective on future directions.
Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.
Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotechnology in Catalysis 3 Volumes written by Bert F. Sels and published by John Wiley & Sons. This book was released on 2017-10-16 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Handbuch präsentiert die in den letzten zehn Jahren entstandenen neuen Anwendungsbereiche und gibt einen umfassenden Überblick über dieses wissenschaftlich und ökonomisch wichtige Gebiet. Einzigartig ist die Verbindung von Grundlagenforschung und industrieller Entwicklung.
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.
Download or read book Nanoalloys written by Florent Calvo and published by Newnes. This book was released on 2013-03-12 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoalloys: From Fundamentals to Emergent Applications presents and discusses the major topics related to nanoalloys at a time when the literature on the subject remains scarce. Particular attention is paid to experimental and theoretical aspects under the form of broad reviews covering the most recent developments. The book is organized into 11 chapters covering the most fundamental aspects of nanoalloys related to their synthesis and characterization, as well as their theoretical study. Aspects related to their thermodynamics and kinetics are covered as well. The coverage then moves to more specific topics, including optics, magnetism and catalysis, and finally to biomedical applications and the technologically relevant issue of self-assembly.With no current single reference source on the subject, the work is invaluable for researchers as the nanoscience field moves swiftly to full monetization. - Encapsulates physical science of structure, properties, size, composition and ordering at nanoscale, aiding synthesis of experimentation and modelling - Multi-expert and interdisciplinary perspectives on growth, synthesis and characterization of bimetallic clusters and particulates supports expansion of your current research activity into applications - Synthesizes concepts and draws links between fundamental metallurgy and cutting edge nanoscience, aiding interdisciplinary research activity
Download or read book Synthesis of Inorganic Nanomaterials written by Sneha Bhagyaraj and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis of Inorganic Nanomaterials: Advances and Key Technologies discusses the latest advancements in the synthesis of various types of nanomaterials. The book's main objective is to provide a comprehensive review regarding the latest advances in synthesis protocols that includes up-to-date data records on the synthesis of all kinds of inorganic nanostructures using various physical and chemical methods. The synthesis of all important nanomaterials, such as carbon nanostructures, Core-shell Quantum dots, Metal and metal oxide nanostructures, Nanoferrites, polymer nanostructures, nanofibers, and smart nanomaterials are discussed, making this a one-stop reference resource on research accomplishments in this area. Leading researchers from industry, academia, government and private research institutions across the globe have contributed to the book. Academics, researchers, scientists, engineers and students working in the field of polymer nanocomposites will benefit from its solutions for material problems. - Provides an up-to-date data record on the synthesis of all kinds of organic and inorganic nanostructures using various physical and chemical methods - Presents the latest advances in synthesis protocols - Includes the latest techniques used in the physical and chemical characterization of nanomaterials - Covers the characterization of all the important materials groups, such as carbon nanostructures, core-shell quantum dots, metal and metal oxide nanostructures, Nano ferrites, polymer nanostructures and nanofibers
Download or read book Silver Micro Nanoparticles written by Samir Kumar and published by BoD – Books on Demand. This book was released on 2021-09-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the different methodologies for producing and synthesizing silver nanoparticles (AgNPs) of various shapes and sizes. It also provides an in-depth understanding of the new methods for characterizing and modifying the properties of AgNPs as well as their properties and applications in various fields. This book is a useful resource for a wide range of readers, including scientists, engineers, doctoral and postdoctoral fellows, and scientific professionals working in specialized fields such as medicine, nanotechnology, spectroscopy, analytical chemistry diagnostics, and plasmonics.
Download or read book Green Metal Nanoparticles written by Suvardhan Kanchi and published by John Wiley & Sons. This book was released on 2018-11-06 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book uniquely focuses on the exploration of the green synthesis of metal nanoparticles and their characterization and applications. Metal nanoparticles are the basic elements of nanotechnology as they are the primary source used in the design of nanostructured devices and materials. Nanomaterials can be manufactured either incidentally, with physical or chemical methods, or naturally; and the high demand for them has led to their large-scale production by various toxic solvents or high energy techniques. However, due to the growing awareness of environmental and safety issues, the use of clean, nontoxic and environment-friendly ways to synthesize metal nanoparticles has emerged out of necessity. The use of biological resources, such as microbes, plant parts, vegetable wastes, agricultural wastes, gums, etc., has grown to become an alternative way of synthesizing metal nanoparticles. This biogenic synthesis is green, environmentally friendly, cost-effective, and nontoxic. The current multi-authored book includes recent information and builds a database of bioreducing agents for various metal nanoparticles using different precursor systems. Green Metal Nanoparticles also highlights different simple, cost-effective, environment-friendly and easily scalable strategies, and includes parameters for controlling the size and shape of the materials developed from the various greener methods.
Download or read book Metallic Nanoparticles written by and published by Elsevier. This book was released on 2008-11-21 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic nanoparticles display fascinating properties that are quite different from those of individual atoms, surfaces or bulk rmaterials. They are a focus of interest for fundamental science and, because of their huge potential in nanotechnology, they are the subject of intense research effort in a range of disciplines. Applications, or potential applications, are diverse and interdisciplinary. They include, for example, use in biochemistry, in catalysis and as chemical and biological sensors, as systems for nanoelectronics and nanostructured magnetism (e.g. data storage devices), where the drive for further miniaturization provides tremendous technological challenges and, in medicine, there is interest in their potential as agents for drug delivery.The book describes the structure of metallic nanoparticles, the experimental and theoretical techniques by which this is determined, and the models employed to facilitate understanding. The various methods for the production of nanoparticles are outlined. It surveys the properties of clusters and the methods of characterisation, such as photoionization, optical spectroscopy, chemical reactivity and magnetic behaviour, and discusses element-specific information that can be extracted by synchrotron-based techniques such as EXAFS, XMCD and XMLD. The properties of clusters can vary depending on whether they are free, deposited on a surface or embedded in a matrix of another material; these issues are explored. Clusters on a surface can be formed by the diffusion and aggregation of atoms; ways of modelling these processes are described. Finally we look at nanotechnology and examine the science behind the potential of metallic nanoparticles in chemical synthesis, catalysis, the magnetic separation of biomolecules, the detection of DNA, the controlled release of molecules and their relevance to data storage.The book addresses a wide audience. There was a huge development of the subject beginning in the mid-1980s where researchers began to study the properties of free nanoparticle and models were developed to describe the observations. The newcomer is introduced to the established models and techniques of the field without the need to refer to other sources to make the material accessible. It then takes the reader through to the latest research and provides a comprehensive list of references for those who wish to pursue particular aspects in more detail. It will also be an invaluable handbook for the expert in a particular aspect of nanoscale research who wishes to acquire knowledge of other areas.The authors are specialists in different aspects of the subject with expertise in physics and chemistry, experimental techniques and computational modelling, and in interdisciplinary research. They have collaborated in research. They have also collaborated in writing this book, with the aim from the outset of making it is a coherent whole rather than a series of independent loosely connected articles.* Appeals to a wide audience* Provides an introduction to established models and techniques in the field* Comprehensive list of references
