Download or read book The Surface Chemistry of Metals and Semiconductors written by Electrochemical Society. Corrosion Division and published by . This book was released on 1960 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Surface Chemistry of Metals and Semiconductors A symposium sponsored by the Office of Naval Research and the Electrochemical Society Columbus Ohio 1959 Edited by Harry C Gatos with the assistance of J W Faust and W J Lafleur With illustrations written by United States. Office of Naval Research and published by . This book was released on 1960 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by CRC Press. This book was released on 2007-05-02 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a carefully developed and comprehensive overview of the corrosion chemistry of metallic materials, this book covers the principal methods of corrosion prevention. It includes a systematic study of the physical chemistry of the surface supported by state-of-the-art analysis methods. The author builds a scientific foundation by developing t
Download or read book Fundamental Gas phase and Surface Chemistry of Vapor phase Deposition II and Process Control Diagnostics and Modeling in Semiconductor Manufacturing IV written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 2001 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Chemistry of Froth Flotation written by S. Ramachandra Rao and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: th The technology of froth flotation, invented in the early 20 century was first used for the concentration of sulfide minerals. Since then it has been applied for the processing of many nonsulfide ores as weIl, including oxides, carbonates, silicates, soluble minerals like halite and sylvite and energy minerals like coal and bitumen. In recent years it has been used for several nonrnineral applications, such as waste water treatment, deinking of paper for recycling and resource recovery from industrial wastes he technology continues to grow with new applications reported every year. Flotation is based on chemical phenomena occurring at the interfaces, solid/water and air/water. Surface Chemistry principles have played a significant role in the development of flotation technology. Knowledge of aqueous solution chemistry and electrochemistry has added to our understanding of the reactions in flotation systems. Professor Jan Leja's book has weIl served researchers and students as they tried to understand the chemistry of flotation, and it is a significant contribution to the advancement of knowledge. However, since the book was first published, new research techniques and ever growing information have made an update necessary. The revised edition compiled by Dr. S. R. Rao has brought together fundamental aspects of the chemistry of flotation and how they apply to practical systems. It should serve all who are working in the area of flotation and interested in exploring new applications of flotation technology.
Download or read book The Chemical Physics of Solid Surfaces and Heterogeneous Catalysis written by D.A. King and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Properties of Electronic Materials is the fifth volume of the series, The Chemical Physics of Solid Surfaces and Heterogeneous Catalysis. This volume indicates the present state of some basic properties of semiconductor surfaces. Chapter one summarizes the general problems in electronic materials and the areas affected by the surface science methods. The next two chapters illustrate the existing perception of the electronic and structural properties of elemental and compound semiconductor surfaces. This volume also deals with the properties of adsorption of semiconductors relating to both relevant gas phase species and metals. Chapters four to six of this volume explore compound semiconductors and elemental semiconductors. The remaining chapters of this volume explore the adsorption of metals on elemental semiconductors; aspects of growth kinetics and dynamics involved in molecular beam epitaxy; molecular beam epitaxy of silicon; insulators; and metastable phases. The last chapter covers the surface chemistry of dry etching processes.
Download or read book Electrochemistry at Metal and Semiconductor Electrodes written by Norio Sato and published by Elsevier. This book was released on 1998-10-09 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemisty at Metal and Semiconductor Electrodes covers the structure of the electrical double layer and charge transfer reactions across the electrode/electrolyte interface. The purpose of the book is to integrate modern electrochemistry and semiconductor physics, thereby, providing a quantitative basis for understanding electrochemistry at metal and semiconductor electrodes. Electrons and ions are the principal particles which play the main role in electrochemistry. This text, therefore, emphasizes the energy level concepts of electrons and ions rather than the phenomenological thermodynamic and kinetic concepts on which most of the classical electrochemistry texts are based. This rationalization of the phenomenological concepts in terms of the physics of semiconductors should enable readers to develop more atomistic and quantitative insights into processes that occur at electrodes. The book incorporates many traditional disciplines of science and engineering such as interfacial chemistry, biochemistry, enzyme chemistry, membrane chemistry, metallurgy, modification of solid interfaces, and materials' corrosion. The text is intended to serve as an introduction for the study of advanced electrochemistry at electrodes and is aimed towards graduates and senior undergraduates studying materials and interfacial chemistry or those beginning research work in the field of electrochemistry.
Download or read book Chemical Bonding at Surfaces and Interfaces written by Anders Nilsson and published by Elsevier. This book was released on 2011-08-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular surface science has made enormous progress in the past 30 years. The development can be characterized by a revolution in fundamental knowledge obtained from simple model systems and by an explosion in the number of experimental techniques. The last 10 years has seen an equally rapid development of quantum mechanical modeling of surface processes using Density Functional Theory (DFT). Chemical Bonding at Surfaces and Interfaces focuses on phenomena and concepts rather than on experimental or theoretical techniques. The aim is to provide the common basis for describing the interaction of atoms and molecules with surfaces and this to be used very broadly in science and technology. The book begins with an overview of structural information on surface adsorbates and discusses the structure of a number of important chemisorption systems. Chapter 2 describes in detail the chemical bond between atoms or molecules and a metal surface in the observed surface structures. A detailed description of experimental information on the dynamics of bond-formation and bond-breaking at surfaces make up Chapter 3. Followed by an in-depth analysis of aspects of heterogeneous catalysis based on the d-band model. In Chapter 5 adsorption and chemistry on the enormously important Si and Ge semiconductor surfaces are covered. In the remaining two Chapters the book moves on from solid-gas interfaces and looks at solid-liquid interface processes. In the final chapter an overview is given of the environmentally important chemical processes occurring on mineral and oxide surfaces in contact with water and electrolytes. Gives examples of how modern theoretical DFT techniques can be used to design heterogeneous catalysts This book suits the rapid introduction of methods and concepts from surface science into a broad range of scientific disciplines where the interaction between a solid and the surrounding gas or liquid phase is an essential component Shows how insight into chemical bonding at surfaces can be applied to a range of scientific problems in heterogeneous catalysis, electrochemistry, environmental science and semiconductor processing Provides both the fundamental perspective and an overview of chemical bonding in terms of structure, electronic structure and dynamics of bond rearrangements at surfaces
Download or read book Introduction to Surface Chemistry and Catalysis written by Gabor A. Somorjai and published by John Wiley & Sons. This book was released on 2010-06-08 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now updated-the current state of development of modern surface science Since the publication of the first edition of this book, molecular surface chemistry and catalysis science have developed rapidly and expanded into fields where atomic scale and molecular information were previously not available. This revised edition of Introduction to Surface Chemistry and Catalysis reflects this increase of information in virtually every chapter. It emphasizes the modern concepts of surface chemistry and catalysis uncovered by breakthroughs in molecular-level studies of surfaces over the past three decades while serving as a reference source for data and concepts related to properties of surfaces and interfaces. The book opens with a brief history of the evolution of surface chemistry and reviews the nature of various surfaces and interfaces encountered in everyday life. New research in two crucial areas-nanomaterials and polymer and biopolymer interfaces-is emphasized, while important applications in tribology and catalysis, producing chemicals and fuels with high turnover and selectivity, are addressed. The basic concepts surrounding various properties of surfaces such as structure, thermodynamics, dynamics, electrical properties, and surface chemical bonds are presented. The techniques of atomic and molecular scale studies of surfaces are listed with references to up-to-date review papers. For advanced readers, this book covers recent developments in in-situ surface analysis such as high- pressure scanning tunneling microscopy, ambient pressure X-ray photoelectron spectroscopy, and sum frequency generation vibrational spectroscopy (SFG). Tables listing surface structures and data summarizing the kinetics of catalytic reactions over metal surfaces are also included. New to this edition: A discussion of new physical and chemical properties of nanoparticles Ways to utilize new surface science techniques to study properties of polymers, reaction intermediates, and mobility of atoms and molecules at surfaces Molecular-level studies on the origin of the selectivity for several catalytic reactions A microscopic understanding of mechanical properties of surfaces Updated tables of experimental data A new chapter on "soft" surfaces, polymers, and biointerfaces Introduction to Surface Chemistry and Catalysis serves as a textbook for undergraduate and graduate students taking advanced courses in physics, chemistry, engineering, and materials science, as well as researchers in surface science, catalysis science, and their applications.
Download or read book Surface Chemistry of Colloidal Nanocrystals written by Ana Luísa Daniel-da-Silva and published by Royal Society of Chemistry. This book was released on 2021-02-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemistry of nanomaterials has developed considerably in the past two decades, and concepts that have emerged from these developments are now well established. The surface modification of nanoparticles is a subject of intense research interest given its importance for many applications across a number of disciplines. This comprehensive guide is the first to be devoted to the surface chemistry of inorganic nanocrystals. Following an introduction to the physical chemistry of surfaces, chapters cover topics such as the surface modification of nanoparticles, water compatible, polymer-based, and inorganic nanocomposites, as well as relevant applications in catalysis, biotechnology and nanomedicine. Highlighting recent advances, Surface Chemistry of Colloidal Nanocrystals provides an integrated approach to chemical aspects related to the surface of nanocrystals. Written by prestigious scientists, this will be a useful resource for students and researchers working in surface science, nanoscience and materials science as well as those interested in the applications of the nanomaterials in areas such as health science, biology, and environmental engineering.
Download or read book Electrical Properties of Solids written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1963 the Research Materials Information Center has been answering inquiries on the availability, preparation, and properties of ultrapure inorganic research specimens. It has been possible to do this with reasonable efficiency by searching an automated coded microfilm collection of the report and open literature and of data sheets and question naires provided by commercial and research producers of pure materials. With the growth of the collection to over 70,000 documents and the increase in the demand for more general background information, it has been necessary to compile bibliographies on an increasing variety of subjects. These have been used as indexes to the microfilmed documents for more efficient searching, and in the past distributed in response to individual requests. However, their size and number no longer permit so casual and uneconomic a method of distribution. The "ORNL Solid State Physics Literature Guides" is a practical alternative. Organization The subject organization of the bibliography is given by the Table of Contents. Each section is preceded by a collection of reviews, bibliographies, and "general" papers (i.e., those dealing with methods or equipment rather than single materials, or with such a wide variety of materials that no subsection was appropriate). Coverage is generally from 1960 to mid-1970. Emphasis is on inorganic materials.
Download or read book Physics and Chemistry of III V Compound Semiconductor Interfaces written by Carl Wilmsen and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of the 111-V compound semiconductors to device fabrica tion has grown considerably in the last few years. This process has been stimulated, in part, by the advancement in the understanding of the interface physics and chemistry of the III-V's. The literature on this subject is spread over the last 15 years and appears in many journals and conference proceedings. Understanding this literature requires consider able effort by the seasoned researcher, and even more for those starting out in the field or by engineers and scientists who wish to apply this knowledge to the fabrication of devices. The purpose of this book is to bring together much of the fundamental and practical knowledge on the physics and chemistry of the 111-V compounds with metals and dielectrics. The authors of this book have endeavored to provide concise overviews of these areas with many tahles ancI grarhs whic. h c. omr>are and summarize the literature. In this way, the book serves as both an insightful treatise on III-V interfaces and a handy reference to the literature. The selection of authors was mandated by the desire to include both fundamental and practical approaches, covering device and material aspects of the interfaces. All of the authors are recognized experts on III-V interfaces and each has worked for many years in his subject area. This experience is projected in the breadth of understanding in each chapter.
Download or read book Electrochemistry of Metals and Semiconductors written by Ashok K. Vijh and published by Marcel Dekker. This book was released on 1973 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Etching of Crystals written by K. Sangwal and published by Elsevier. This book was released on 2012-12-02 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects in Solids, Volume 15: Etching of Crystals: Theory, Experiment, and Application focuses on the processes, reactions, and methodologies involved in the etching of crystals, including thermodynamics and diffusion. The publication first underscores the defects in crystals, detection of defects, and growth and dissolution of crystals. Discussions focus on thermodynamic theories, nature of pit sites, surface roughening during diffusion-controlled dissolution, growth controlled by simultaneous mass transfer and surface reactions, and chemical and thermal etching. The text then examines the theories of dissolution and etch-pit formation and the chemical aspects of the dissolution process, including catalytic reactions, dissolution of semiconductors, topochemical adsorption theories, and diffusion theories. The book tackles the solubility of crystals and complexes in solution and the kinetics and mechanism of dissolution. Topics include metallic crystals, semiconductors, stability of complexes, relationship between solubility, surface energy, and hardness of crystals, and solvents for crystals and estimation of crystal solubility in solvents other than water. The publication is a dependable source of data for readers interested in the etching of crystals.
Download or read book Electrochemical Kinetics written by Klaus J. Vetter and published by Elsevier. This book was released on 2013-10-22 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Kinetics: Theoretical Aspects focuses on the processes, methodologies, reactions, and transformations in electrochemical kinetics. The book first offers information on electrochemical thermodynamics and the theory of overvoltage. Topics include equilibrium potentials, concepts and definitions, electrical double layer and electrocapillarity, and charge-transfer, diffusion, and reaction overvoltage. Crystallization overvoltage, total overvoltage, and resistance polarization are also discussed. The text then examines the methods of determining electrochemical reaction mechanisms, including examination of the overall electrode reaction and determination of the type of overvoltage and reaction kinetics. A list of frequently used symbols is also provided. The book is a valuable reference for readers interested in the study of electrochemical kinetics.
Download or read book The Surface Chemistry of Si 111 7x7 written by Marc Michael Kollrack and published by . This book was released on 1990 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry of Metal CVD written by Toivo T. Kodas and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: High purity, thin metal coatings have a variety of important commercial applications, for example, in the microelectronics industry, as catalysts, as protective and decorative coatings as well as in gas-diffusion barriers. This book offers detailed, up- to-date coverage of the chemistry behind the vapor deposition of different metals from organometallic precursors. In nine chapters, the CVD of metals including aluminum, tungsten, gold, silver, platinum, palladium, nickel, as well as copper from copper(I) and copper(II) compounds is covered. The synthesis and properties of the precursors, the growth process, morphology, quality and adhesion of the resulting films as well as laser- assisted, ion- assisted and plasma-assisted methods are discussed. Present applications and prospects for future developments are summarized. With ca. 1000 references and a glossary, this book is a unique source of in-depth information. It is indispensable for chemists, physicists, engineers and materials scientists working with metal- coating processes and technologies. From Reviews: 'I highly recommend this book to anyone interested in learning more about the chemistry of metal CVD.' J. Am Chem. Soc.
