Download or read book Thermal Degradation of Polymeric Materials written by Krzysztof Pielichowski and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the thermal degradation of polymers is of paramount importance for developing a rational technology of polymer processing and higher-temperature applications. Controlling degradation requires understanding of many different phenomena, including chemical mechanisms, the influence of polymer morphology, the complexities of oxidation chemistry, and the effects of stabilisers, fillers and other additives. This book offers a wealth of information for polymer researchers and processors requiring an understanding of the implications of thermal degradation on material and product performance.
Download or read book Polyvinyl Chloride Degradation written by George Wypych and published by Elsevier Publishing Company. This book was released on 1985 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Photostabilization of Polymers written by J.F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, the production of polymers and plastics has been increasing rapidly. In spite of developing new polymers and polymeric materials, only 40-60 are used commercially on a large scale. It has been estimated that half of the annual production of polymers is employed outdoors. Increasing the stability of polymers and plastics towards heat, light, atmospheric oxygen and other environmental agents and weathering conditions has always been a very important problem. The photochemical instability of most of polymers limits them to outdoor application, where they are photo degraded fast over periods ranging from months to a few years. To the despair of technologists and consumers alike, photodegrada tion and environmental ageing of polymers occur much faster than can be expected from knowledge collected in laboratories. In many cases, improved methods of preparation and purification of both monomers and polymers yield products of better quality and higher resistance to heat and light. However, without stabilization of polymers by applica tion of antioxidants (to decrease thermal oxidative degradation) and photostabilizers (to decrease photo-oxidative degradation) it would be impossible to employ polymers and plastics in everyday use.
Download or read book Polymer Degradation and Stabilisation written by Norman Grassie and published by CUP Archive. This book was released on 1988-04-14 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of polymer degradation and stabilisation is of considerable practical importance as the industrial uses of polymeric materials continue to expand. In this book, the authors lucidly relate technological phenomena to the chemistry and physics of degradation and stabilisation processes. Degradation embraces a variety of technologically important phenomena ranging from relatively low temperature processes such as 'weathering' of plastics, 'fatigue' of rubbers through the processing of polymers in shearing mixers to very high temperature processes such as flammability and ablation. All these technological phenomena have in common certain basic chemical reactions. Thus 'weathering' has its roots in photo-oxidation, 'fatigue' and melt-degradation in mechano-oxidation and flammability, and ablation in ablation in pyrolysis and vapour phase oxidation.
Download or read book Handbook of Thermal Analysis and Calorimetry written by and published by Elsevier. This book was released on 2018-03-12 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume Six, Second Edition, presents the latest in a series that has been well received by the thermal analysis and calorimetry community. This volume covers recent advances in techniques and applications that complement the earlier volumes. There has been tremendous progress in the field in recent years, and this book puts together the most high-impact topics selected for their popularity by new editors Sergey Vyazovkin, Nobuyoshi Koga and Christoph Schick—all editors of Thermochimica Acta. Among the important new techniques covered are biomass conversion; sustainable polymers; polymer nanocompsoties; nonmetallic glasses; phase change materials; propellants and explosives; applications to pharmaceuticals; processes in ceramics, metals, and alloys; ionic liquids; fast-scanning calorimetry, and more. - Features 19 all-new chapters to bring readers up to date on the current status of the field - Provides a broad overview of recent progress in the most popular techniques and applications - Includes chapters authored by a recognized leader in each field and compiled by a new team of editors, each with at least 20 years of experience in the field of thermal analysis and calorimetry - Enables applications across a wide range of modern materials, including polymers, metals, alloys, ceramics, energetics and pharmaceutics - Overviews the current status of the field and summarizes recent progress in the most popular techniques and applications
Download or read book Thermal Degradation of Polymeric Materials written by Krzysztof Pielichowski and published by Elsevier. This book was released on 2022-11-05 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Degradation of Polymeric Materials, Second Edition offers a wealth of information for polymer researchers and processors who require a thorough understanding of the implications of thermal degradation on materials and product performance. Sections cover thermal degradation mechanisms and kinetics, as well as various techniques, such as thermogravimetry in combination with mass spectroscopy and infrared spectrometry to investigate thermal decomposition routes. Other chapters focus on polymers and copolymers, including polyolefins, styrene polymers, polyvinyl chloride, polyamides, polyurethanes, polyesters, polyacrylates, natural polymers, inorganic polymers, high temperature-resistant and conducting polymers, blends, organic-inorganic hybrid materials, nanocomposites, and biocomposites. Finally, other key considerations such as recycling of polymers by thermal degradation, thermal degradation during processing, and modelling, are discussed in detail. - Explains mechanisms of polymer degradation, making it possible to understand and predict material behavior at elevated temperatures - Offers systematic coverage of each polymer group that is supported by data detailed explanations and critical analysis - Investigates thermal decomposition routes in new materials, such as organic-inorganic hybrid materials and polymer nanocomposites
Download or read book Stereoregular Polymers and Stereospecific Polymerizations written by Giulio Natta and published by Elsevier. This book was released on 2013-10-22 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereoregular Polymers and Stereospecific Polymerizations: The Contributions of Guilio Natta and his School to Polymer Chemistry, Volume 1 covers the developments in understanding the reactions, nomenclature, and physico-chemical properties of polymers. This volume is composed of 82 chapters, and starts with surveys of the synthesis and crystal structure of polymers. Significant chapters are devoted to the characterization of crystalline polymers, with emphasis on the determination of their viscosity and molecular weight. Other chapters deal with stereospecific polymers of olefins, mechanism of stereospecific catalysis, reaction kinetics. This volume also considers the polymerization of synthetic elastomers and the copolymerization of olefins, as well as their reaction kinetics. The remaining chapters describe the X-ray characterization of isotactic polymers. This book is directed toward polymer chemists.
Download or read book Recycling of Polyurethane Foams written by Sabu Thomas and published by William Andrew. This book was released on 2018-06-06 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Polyurethane Foams introduces the main degradation/depolymerization processes and pathways of polyurethane foam materials, focusing on industrial case studies and academic reviews from recent research and development projects. The book can aid practitioners in understanding the basis of polymer degradation and its relationship with industrial processes, which can be of substantial value to industrial complexes the world over. The main pathways of polymer recycling via different routes and industrial schemes are detailed, covering all current techniques, including regrinding, rebinding, adhesive pressing and compression moulding of recovered PU materials that are then compared with depolymerization approaches. The book examines life cycle assessment and cost analysis associated with polyurethane foams waste management, showing the potential of various techniques. This book will help academics and researchers identify and improve on current depolymerization processes, and it will help industry sustainability professionals choose the appropriate approach for their own waste management systems, thus minimizing the costs and environmental impact of their PU-based end products. - Offers a comprehensive review of all polyurethane foam recycling processes, including both chemical and mechanical approaches - Assesses the potential of each recycling process - Helps industry-based practitioners decide which approach to take to minimize the cost and environmental impact of their end product - Enables academics and researchers to identify and improve upon current processes of degradation and depolymerization
Download or read book The Radiation Chemistry of Macromolecules written by Malcolm Dole and published by Elsevier. This book was released on 2012-12-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Radiation Chemistry of Macromolecules is the first from a two-volume series aiming to contribute to the radiation chemistry in general. The chapters in this volume are divided into two major parts, where the first part deals with the basic processes and theory, while the second part tackles experimental techniques and applications to polyethylene. Part I focuses on the discussion on general principles of radiation effects; fundamental concepts on energy transfer; and the theory of free radicals. The subject of polymers is discussed thoroughly in several chapters including its molecular mobilities and electrical conductivity. Part II presents experimental techniques and a description of the radiation chemistry of a single polymer. This part also includes a discussion on the morphology of polyethylene and free radicals in irradiated polyethylene. This book is an important reference to students and scientists in the field of radiation chemistry of macromolecules.
Download or read book Poly Vinyl Chloride Based Composites and Nanocomposites written by Akhina H and published by Springer Nature. This book was released on 2023-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers Poly(vinyl chloride) Fundamentals, Fabrication and characterization of PVC based composites and nanocomposites specifically natural fibre reinforced PVC composites, carbonaceous filler reinforced PVC composites , metal oxide fled PVC composites and nanocomposites etc. This book also covers the conducting PVC composites and recent advances in nanocomposites based on PVC .The rheological, mechanical, barrier, thermal, dielectric behaviour of PVC composites and nanocomposites are discussed in details.
Download or read book Handbook of Environmental Degradation of Materials written by Myer Kutz and published by William Andrew. This book was released on 2012-09-24 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing stays the same for ever. The environmental degradation and corrosion of materials is inevitable and affects most aspects of life. In industrial settings, this inescapable fact has very significant financial, safety and environmental implications. The Handbook of Environmental Degradation of Materials explains how to measure, analyse, and control environmental degradation for a wide range of industrial materials including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors such as weather, seawater, and fire. Divided into sections which deal with analysis, types of degradation, protection and surface engineering respectively, the reader is introduced to the wide variety of environmental effects and what can be done to control them. The expert contributors to this book provide a wealth of insider knowledge and engineering knowhow, complementing their explanations and advice with Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensures that the reader understands the practical measures that can be put in place to save money, lives and the environment. The Handbook's broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete,wood and textiles For each type of material, the book describes the kind of degradation that effects it and how best to protect it Case Studies show how organizations from small consulting firms to corporate giants design and manufacture products that are more resistant to environmental effects
Download or read book Mass Spectrometry of Polymers written by Giorgio Montaudo and published by CRC Press. This book was released on 2001-10-29 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass Spectrometry (MS) has rapidly become an indispensable tool in polymer analysis, and modern MS today complements in many ways the structural data provided by Nuclear Magnetic Resonance (NMR) and Infrared (IR) methods. Recent advances have sparked a growing interest in this field and established a need for a summary of progress made and results
Download or read book Polymer Stabilization and Degradation written by Peter P. Klemchuk and published by . This book was released on 1985 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Chromatography of Polymers written by and published by Elsevier. This book was released on 2011-09-22 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Chromatography of Polymers
Download or read book Freshwater Microplastics written by Martin Wagner and published by Springer. This book was released on 2017-11-21 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license. This volume focuses on microscopic plastic debris, also referred to as microplastics, which have been detected in aquatic environments around the globe and have accordingly raised serious concerns. The book explores whether microplastics represent emerging contaminants in freshwater systems, an area that remains underrepresented to date. Given the complexity of the issue, the book covers the current state-of-research on microplastics in rivers and lakes, including analytical aspects, environmental concentrations and sources, modelling approaches, interactions with biota, and ecological implications. To provide a broader perspective, the book also discusses lessons learned from nanomaterials and the implications of plastic debris for regulation, politics, economy, and society. In a research field that is rapidly evolving, it offers a solid overview for environmental chemists, engineers, and toxicologists, as well as water managers and policy-makers.
Download or read book Heat Release in Fires written by Vytenis Babrauskas and published by Taylor & Francis. This book was released on 1990-12 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Composites with Functionalized Nanoparticles written by Krzysztof Pielichowski and published by Woodhead Publishing. This book was released on 2018-09-22 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Composites with Functional Nanoparticles: Synthesis, Properties, and Applications reviews the latest research in the area of polymer nanocomposites and functionalized nanoparticles, providing an introduction for those new to the field, and supporting further research and development. The book helps researchers and practitioners better understand the key role of nanoparticle functionalization for improving the compatibility of inorganic metallic nanomaterials with organic polymers, and for the fabrication of nanostructured materials with special properties. A range of nanoparticles, such as carbon nanotubes are covered, along with descriptions of the methods of functionalization to support better compatibility with polymer matrices. The book also discusses the various applications of this technology, including uses in electronics and the medical and energy industries. - Summarizes the latest research in functionalized nanoparticles for modification of polymer matrices, providing a valuable platform for further research - Includes functionalization of a range of nanoparticles for incorporation into nanocomposites, including carbon nanotubes, graphene, gold and silver, silica and clay - Provides detailed coverage of application areas, including energy, electronics, biomedical applications, and end-of-life considerations
