Download or read book Structure Of Surfaces Iv The Proceedings Of The 4th International Conference On The Structure Of Surfaces written by X D Xie and published by World Scientific. This book was released on 1994-06-22 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Conference on the Structure of Surfaces provides a forum for the report of new results and less the review of the status of surface structure and the relationship between surface and interface structure and physical or chemical properties of interest. Also within the scope of the meeting are novel experimental and theoretical approaches for the determination of surface and interface structures, computer simulation of dynamic processes and new developments in instrumentation.
Download or read book Surface Structure Determination by LEED and X rays written by Wolfgang Moritz and published by Cambridge University Press. This book was released on 2022-08-25 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover exciting new developments and applications of LEED and X-ray diffraction, alongside detailed introductory material.
Download or read book The Structure of Surfaces written by M.A. Van Hove and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book X ray Absorption Fine Structure for Catalysts and Surfaces written by Yasuhiro Iwasawa and published by World Scientific. This book was released on 1996 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray absorption fine structure (XAFS) is a powerful technique in characterization of structures and electronic states of materials in many research fields including, e.g., catalysts, semiconductors, optical ingredients, magnetic materials, and surfaces. This characterization technique could be applied in a static or a dynamic state (in-situ condition). The XAFS can provide information that is not accessible by other techniques for characterization of materials, particularly catalysts and related surfaces. Furthermore, XAFS can provide a molecular-level approach to the study of reaction mechanisms for the understanding of catalysts and development of new catalysts. A number of synchrotron radiation facilities have been planned to be built in Asian countries in addition to the high-brilliant synchrotron radiation facilities under construction in the USA, Europe, and Japan. The applications of XAFS have now expanded to catalytic chemistry and engineering, surface science, organometallic chemistry, materials science, solid-state chemistry, geophysics, etc. This book caters to a wide range of researchers and students working in the domain or related topics.
Download or read book The Structure of Surfaces II written by Johannes F. van der Veen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Structure of Surfaces IV written by Xide Xie and published by World Scientific Publishing Company Incorporated. This book was released on 1994 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cohesion and Structure of Surfaces written by K. Binder and published by Elsevier. This book was released on 1995-12-18 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past fifteen years there has been a dramatic increase in the number of different surfaces whose structures have been determined experimentally. For example, whereas in 1979 there were only 25 recorded adsorption structures, to date there are more than 250. This volume is therefore a timely review of the state-of-the-art in this dynamic field. Chapter one contains a compilation of the structural data base on surfaces within a series of tables that allows direct comparison of structural parameters for related systems. Experimental structural trends amongst both clean surfaces and adsorbate systems are highlighted and discussed. The next chapter outlines the successes of local density functional theory in predicting the relaxations and reconstructions of clean metal and semiconductor surfaces, and the behaviour of adsorbates such as hydrogen, oxygen and alkali elements on metal surfaces, thereby explaining some of the experimental trends observed within the database. These ab initio density functional calculations are of ground state properties at the absolute zero of temperature. Chapter three provides an introduction to finite temperature effects in a pedagogical review of current statistical mechanical treatments of phase transitions at surfaces, many of which display the prominent role of fluctuations or non-mean field behaviour. The final chapter discusses the relationship of the reactivity of a surface to its morphology and composition, which is particularly relevant to a fundamental understanding of catalysis.
Download or read book The Structure of Surfaces IV written by X-D. Xie and published by . This book was released on 1994 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Reactivity of Surfaces written by C. Morterra and published by Elsevier. This book was released on 1989-07-01 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: Between the area known as surface science (which mainly deals with single crystal surfaces) and the vast area of the surface properties of dispersed solids (knowledge of which is widely applied in catalysis and materials science) there is still a remarkably wide, although gradually decreasing, gap. Because fundamental physico-chemical problems are involved, this borderline area needs to be explored. With this objective, the Trieste meeting brought together specialists with a variety of origins and backgrounds, with the aim of stimulating the growth of our knowledge in this area. This proceedings volume contains ninety-three papers, comprising plenary lectures, short communications, and poster contributions on the applications of physical and theoretical methods to perfect and dispersed (microcrystalline and amorphous) metals, oxides, and mixed systems. Special emphasis is given to metal-support interfaces. The book thus provides a wealth of up-to-date information on a topic of current interest which will be of value to researchers who use chemical and/or physical methods for the study of surfaces.
Download or read book Stereotomy written by Samuel Edward Warren and published by . This book was released on 1875 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tailoring Surfaces written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Bonding at Surfaces and Interfaces written by Anders Nilsson and published by Elsevier. This book was released on 2011-08-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular surface science has made enormous progress in the past 30 years. The development can be characterized by a revolution in fundamental knowledge obtained from simple model systems and by an explosion in the number of experimental techniques. The last 10 years has seen an equally rapid development of quantum mechanical modeling of surface processes using Density Functional Theory (DFT). Chemical Bonding at Surfaces and Interfaces focuses on phenomena and concepts rather than on experimental or theoretical techniques. The aim is to provide the common basis for describing the interaction of atoms and molecules with surfaces and this to be used very broadly in science and technology. The book begins with an overview of structural information on surface adsorbates and discusses the structure of a number of important chemisorption systems. Chapter 2 describes in detail the chemical bond between atoms or molecules and a metal surface in the observed surface structures. A detailed description of experimental information on the dynamics of bond-formation and bond-breaking at surfaces make up Chapter 3. Followed by an in-depth analysis of aspects of heterogeneous catalysis based on the d-band model. In Chapter 5 adsorption and chemistry on the enormously important Si and Ge semiconductor surfaces are covered. In the remaining two Chapters the book moves on from solid-gas interfaces and looks at solid-liquid interface processes. In the final chapter an overview is given of the environmentally important chemical processes occurring on mineral and oxide surfaces in contact with water and electrolytes. Gives examples of how modern theoretical DFT techniques can be used to design heterogeneous catalysts This book suits the rapid introduction of methods and concepts from surface science into a broad range of scientific disciplines where the interaction between a solid and the surrounding gas or liquid phase is an essential component Shows how insight into chemical bonding at surfaces can be applied to a range of scientific problems in heterogeneous catalysis, electrochemistry, environmental science and semiconductor processing Provides both the fundamental perspective and an overview of chemical bonding in terms of structure, electronic structure and dynamics of bond rearrangements at surfaces
Download or read book Equilibrium Structure and Properties of Surfaces and Interfaces written by A. Gonis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is almost self-evident that surface and interface science, coupled with the electronic structure of bulk materials, playa fundamental role in the understanding of materials properties. If one is to have any hope of understanding such properties as catalysis, microelectronic devices and contacts, wear, lubrication, resistance to corrosion, ductility, creep, intragranular fracture, toughness and strength of steels, adhesion of protective oxide scales, and the mechanical properties of ceramics, one must address a rather complex problem involving a number of fundamental parameters: the atomic and electronic structure, the energy and chemistry of surface and interface regions, diffusion along and across interfaces, and the response of an interface to stress. The intense need to gain an understanding of the properties of surfaces and interfaces is amply attested to by the large number of conferences and workshops held on surface and interface science. Because of this need, the fields of surface and interface science have been established in their own right, although their development presently lags behind that of general materials science associated with bulk, translationally invariant systems. There are good reasons to expect this situation to change rather dramatically in the next few years. Existing techniques for investigating surfaces and interfaces have reached maturity and are increasingly being applied to systems of practical relevance. New techniques are still being created, which drastically widen the scope of applicability of surface and interface studies. On the experimental side, new microscopies are bearing fruit.
Download or read book Concepts in Surface Physics written by M-C. Desjonqueres and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended as an introduction to surface science for graduate students. It began as a course of lectures that we gave at the University of Paris (Orsay). Its main objectives are twofold: to provide the reader with a compre hensive presentation of the basic principles and concepts of surface physics and to show the usefulness of these concepts in the real world by referring to experiments. It starts at a rather elementary level since it only requires a knowledge of solid state physics, quantum mechanics, thermodynamics and statistical physics which does not exceed the background usually taught to students early in their university courses. However, since it finally reaches an advanced level, we have tried to render it as self-contained as possible so that it remains accessible even to an unexperienced reader. Furthermore, the emphasis has been put on a pedagogical level rather than on a technical level. In this spirit, whenever possible, models which are simplified, but which contain the features that are essential to the appearance of the phenomena, have been set up and solved in a completely analytical way. The logic should be transparent enough for the reader although, most often, a more rigorous solution would need the use of a computer. To conclude, we have tried to give an account of surface physics which should be of use to the theoretician as well as to the experimentalist. The following comments can be made on the contents of this book.
Download or read book Electronic Structure of Disordered Alloys Surfaces and Interfaces written by Ilja Turek and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, there is an increasing interest in the prediction of properties of classical and new materials such as substitutional alloys, their surfaces, and metallic or semiconductor multilayers. A detailed understanding based on a thus of the utmost importance for fu microscopic, parameter-free approach is ture developments in solid state physics and materials science. The interrela tion between electronic and structural properties at surfaces plays a key role for a microscopic understanding of phenomena as diverse as catalysis, corrosion, chemisorption and crystal growth. Remarkable progress has been made in the past 10-15 years in the understand ing of behavior of ideal crystals and their surfaces by relating their properties to the underlying electronic structure as determined from the first principles. Similar studies of complex systems like imperfect surfaces, interfaces, and mul tilayered structures seem to be accessible by now. Conventional band-structure methods, however, are of limited use because they require an excessive number of atoms per elementary cell, and are not able to account fully for e.g. substitu tional disorder and the true semiinfinite geometry of surfaces. Such problems can be solved more appropriately by Green function techniques and multiple scattering formalism.
Download or read book On Solar Hydrogen and Nanotechnology written by Lionel Vayssieres and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: More energy from the sun strikes Earth in an hour than is consumed by humans in an entire year. Efficiently harnessing solar power for sustainable generation of hydrogen requires low-cost, purpose-built, functional materials combined with inexpensive large-scale manufacturing methods. These issues are comprehensively addressed in On Solar Hydrogen & Nanotechnology – an authoritative, interdisciplinary source of fundamental and applied knowledge in all areas related to solar hydrogen. Written by leading experts, the book emphasizes state-of-the-art materials and characterization techniques as well as the impact of nanotechnology on this cutting edge field. Addresses the current status and prospects of solar hydrogen, including major achievements, performance benchmarks, technological limitations, and crucial remaining challenges Covers the latest advances in fundamental understanding and development in photocatalytic reactions, semiconductor nanostructures and heterostructures, quantum confinement effects, device fabrication, modeling, simulation, and characterization techniques as they pertain to solar generation of hydrogen Assesses and establishes the present and future role of solar hydrogen in the hydrogen economy Contains numerous graphics to illustrate concepts, techniques, and research results On Solar Hydrogen & Nanotechnology is an essential reference for materials scientists, physical and inorganic chemists, electrochemists, physicists, and engineers carrying out research on solar energy, photocatalysis, or semiconducting nanomaterials, both in academia and industry. It is also an invaluable resource for graduate students and postdoctoral researchers as well as business professionals and consultants with an interest in renewable energy.
Download or read book Reference Catalogue of Current Literature written by and published by . This book was released on 1906 with total page 1612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
