Download or read book The Stability of High temperature Oxides written by Frank Terrance Greene and published by . This book was released on 1957 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Oxides written by Allen Alper and published by Elsevier. This book was released on 2012-12-02 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Oxides: Refractory Glasses, Glass-Ceramics, and Ceramics is the fourth part of a series of four books on high temperature oxides. This book is divided into nine chapters that cover refractory glasses and glass-ceramics, alumina-containing compounds, zinc oxide, tungsten oxide compounds, and slip-casting of ceramics. The first chapters of the book deal with the fabrication, characterization, and application of refractory glasses and glass-ceramics. These topics are followed by considerable chapters on the preparation, properties, and application of mullite, oxide spinels, oxides containing tungsten, and zinc oxide. A chapter on slip-cast ceramics and refractories approaches slip-casting from a scientific point of view of this complex process. Included also in this text are the advances in sintered and fusion-cast glass-contact refractories, such as zirconium oxide-silica-alumina. The concluding chapter deals with the quantitative calculations of the magnitudes of the physical properties of glasses and the variation of these properties with temperature. This book is of great value to ceramic and glass researchers and scientists.

Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings

Download or read book High Temperature Oxides written by Allen M. Alper and published by Elsevier. This book was released on 2013-10-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refractory Materials: A Series of Monographs Volume 5 is a collection of works from different scientists who have made important discoveries in fields related to chemistry. The text covers topics such as thoria and yttria, and the refractory oxides of the lanthanide and actinide elements; single-crystal titanates and zirconates; some binary systems of zirconium dioxide; and zircon and zirconates. Also covered are topics such as halfnium oxide – its occurrence, purification, and physical and thermodynamic properties; and the structure and physical properties of Nb2O5 and Ta2O5. The book is recommended for chemists and materials scientists who would like to know more about the studies of other experts in the field and their applications.

Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with understanding the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry and alloy composition. The focus is on designing (or selecting) alloy compositions which provide optimal resistance to attack by corrosive gases. . Emphasises quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities and alloy compositions. . Uses phase diagrams and diffusion paths to analyse and interpret scale structures and internal precipitation distributions . Provides a detailed examination of corrosion in industrial gases (water vapour effects, carburisation and metal dusting, sulphidation) . Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data . Combines physical chemistry and materials science methodologies.

Download or read book Stability and solubility of metal oxides in high temperature water written by D. D. Macdonald and published by . This book was released on 1974 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Non intrusive Instrumentation for Propulsion Engines written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Propulsion and Energetics Panel. Symposium and published by North Atlantic Treaty Organization Resear Rganization. This book was released on 1998 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Oxide Handbook written by G. V. Samsonov and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuous and ever expanding development of high-temperature tech nology involves the use of high -temperature refractory materials and one of the most important classes of these is the oxides, i.e., compounds of elements with oxygen. Oxides are the oldest refractory compounds known in technology and this is connected with their high chemical stability and abundance in nature. In addition to the use of oxides as raw materials for metallurgical processes, the refractoriness, chemical stability, and magnetic and other technically important properties of oxides have been put to use since antiquity. At the present time the importance of oxides as bases of many materials for new technology is substantial and is growing rapidly with the development of processes for the direct conversion of various forms of energy into electrical energy, the development of nuclear technOlogy, electronics, semiconductor and dielectric technOlogy, and cosmic technology, where the refractoriness and chemical stability of oxides are used in combination with their specific physical properties. Oxides are the foundation of the so-called oxygen -containing or oxygen refractory materials, which are fundamental to high-temperature tech nology. Oxides are no less important as the bases of practically all structural ma terials and rocks. A number of oxides are involved in biological processes.

Download or read book Ultra High Temperature Ceramics written by William G. Fahrenholtz and published by John Wiley & Sons. This book was released on 2014-10-10 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book to focus on ultra-high temperature ceramic materials in more than 20 years Ultra-High Temperature Ceramics are a family of compounds that display an unusual combination of properties, including extremely high melting temperatures (>3000°C), high hardness, and good chemical stability and strength at high temperatures. Typical UHTC materials are the carbides, nitrides, and borides of transition metals, but the Group IV compounds (Ti, Zr, Hf) plus TaC are generally considered to be the main focus of research due to the superior melting temperatures and stable high-melting temperature oxide that forms in situ. Rather than focusing on the latest scientific results, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications broadly and critically combines the historical aspects and the state-of-the-art on the processing, densification, properties, and performance of boride and carbide ceramics. In reviewing the historic studies and recent progress in the field, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications provides: Original reviews of research conducted in the 1960s and 70s Content on electronic structure, synthesis, powder processing, densification, property measurement, and characterization of boride and carbide ceramics. Emphasis on materials for hypersonic aerospace applications such as wing leading edges and propulsion components for vehicles traveling faster than Mach 5 Information on materials used in the extreme environments associated with high speed cutting tools and nuclear power generation Contributions are based on presentations by leading research groups at the conference "Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications II" held May 13-19, 2012 in Hernstein, Austria. Bringing together disparate researchers from academia, government, and industry in a singular forum, the meeting cultivated didactic discussions and efforts between bench researchers, designers and engineers in assaying results in a broader context and moving the technology forward toward near- and long-term use. This book is useful for furnace manufacturers, aerospace manufacturers that may be pursuing hypersonic technology, researchers studying any aspect of boride and carbide ceramics, and practitioners of high-temperature structural ceramics.

Download or read book Oxidation of Tungsten written by Vincent David Barth and published by . This book was released on 1961 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report presents a detailed review of available information on the oxidation of W and its alloys. W is relatively inert below 700 C. As the temperature is increased above this level, however, oxidation becomes progressively more rapid, reaching catastrophic rates at temperatures around 1200 C and above. Various theories for the mechanism and rates of W oxidation at different temperatures are reviewed, and the effect of pressure and water vapor on the stability of W oxides is discussed in detail. The elevatedtemperature reactions of W with other materials, such as refractory oxides, and with gases other than oxygen also are covered. Information on the protection of W by alloying and coating is included. (Author).

Download or read book High temperature Solid Oxide Fuel Cells Fundamentals Design and Applications written by S.C. Singhal and published by Elsevier. This book was released on 2003-12-08 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications provides a comprehensive discussion of solid oxide fuel cells (SOFCs). SOFCs are the most efficient devices for the electrochemical conversion of chemical energy of hydrocarbon fuels into electricity, and have been gaining increasing attention for clean and efficient distributed power generation. The book explains the operating principle, cell component materials, cell and stack designs and fabrication processes, cell and stack performance, and applications of SOFCs. Individual chapters are written by internationally renowned authors in their respective fields, and the text is supplemented by a large number of references for further information. The book is primarily intended for use by researchers, engineers, and other technical people working in the field of SOFCs. Even though the technology is advancing at a very rapid pace, the information contained in most of the chapters is fundamental enough for the book to be useful even as a text for SOFC technology at the graduate level.

Download or read book Introduction to High Temperature Oxidation of Metals written by N. Birks and published by Hodder Education. This book was released on 1983 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Chemistry of Silicates and Other Oxide Systems Vysokotemperaturnaya Khimiya Silikatnykh I Drugikh Okisnykh Sistem B ico otem epat pha X m C ath ix p x O ch ix C ctem written by N. A. Toropov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ever-increasing importance of chemical reactions at high and superhigh temperatures in crystalline, amorphous, and semicrystalline SOlids, as well as the reactions of these solids with gases, prompted the authors of this book to examine critically the literature available in this field and to present a general review of the subject. In this monograph we discuss those chemical and physicochemical points which we consider to be most important for solving a series of problems in the preparation and use of new inorganic materials. We hope that this book will be of interest to the many specialists working on inorganic materials. N. A. Toropov PREFACE Modem technology demands ever more materials with high mechanical strength, heat and chemical re sistance, fire resistance, special electrical properties, particular behavior toward active radiations, etc. The search for such materials requires the study of various chemical compounds, metallic alloys, and other fused in organic systems, especially oxide systems. Materials based on oxides begin to assume increasing importance in many fields of the new technology. In this connection the investigation of oxides and systems consisting of two and more oxides is expanding greatly.

Download or read book High Temperature Solid Oxide Cells written by Junwei Wu and published by Frontiers Media SA. This book was released on 2021-11-05 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Corrosion written by Anand S Khanna and published by World Scientific. This book was released on 2016-04-07 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book reviews the state of the art of high temperature related problems pertaining to their utility, microstructure, mechanical properties, actual behavior in different environments, their protection by various kinds of coatings at high temperatures and a new concept of nanomaterials at high temperatures.The book begins with fundamentals of oxidation and corrosion. Various concepts relating to the modification or deterioration of mechanical properties when material is exposed to an aggressive environment compared to an inert environment or vacuum are also covered. Other chapters highlight the behavior of various advanced materials to high temperature conditions, an important high temperature effect called Active Element Effect, and many high temperature coatings and their behavior.Written by world-renowned authors in their own field, this book will be useful for professionals and academics in materials science and nanoscience.

Download or read book Intermediate Temperature Solid Oxide Fuel Cells written by Zongping Shao and published by Springer. This book was released on 2016-09-12 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses recent advances in intermediate-temperature solid oxide fuel cells (IT-SOFCs), focusing on material development and design, mechanism study, reaction kinetics and practical applications. It consists of five chapters presenting different types of reactions and materials employed in electrolytes, cathodes, anodes, interconnects and sealants for IT-SOFCs. It also includes two chapters highlighting new aspects of these solid oxide fuel cells and exploring their practical applications. This insightful and useful book appeals to a wide readership in various fields, including solid oxide fuel cells, electrochemistry, membranes and ceramics. Zongping Shao is a Professor at the State Key Laboratory of Materials-Oriented Chemical Engineering and the College of Energy, Nanjing University of Technology, China. Moses O. Tade is a Professor at the Department of Chemical Engineering, Curtin University, Australia.

Download or read book Physical vapor deposition and thermal stability of hard oxide coatings written by Ludvig Landälv and published by Linköping University Electronic Press. This book was released on 2019-04-26 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art tools for machining metals are primarily based on a metal-ceramic composite (WC-Co) coated with different combinations of carbide, nitride, and oxide coatings. Combinations of these coating materials are optimized to withstand specific wear conditions. Oxide coatings, mainly α-Al2O3, are especially desired because of their high hot-hardness, chemical inertness with respect to the workpiece, and their low friction. The search for possible alloy elements, which may facilitate the deposition of such oxides by means of physical vapor deposition (PVD) techniques, has been the goal of this thesis. The sought alloy should form thermodynamically stable or metastable compounds, compatible with the temperature of use in metal cutting application. This thesis deals with process development and coating characterization of such new oxide alloy thin films, focusing on the Al-V-O, Al-Cr-Si-O, and Cr-Zr-O systems. Alloying aluminum oxide with iso-valent vanadium is a candidate for forming the desired alloys. Therefore, coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited with reactive sputter deposition. X-ray diffraction showed three different crystal structures depending on V-metal fraction in the coating: α-V2O3 rhombohedral structure for 100 at.% V, a defect spinel structure for the intermediate region, (63 - 42 at.% V), and a gamma-alumina-like solid solution at lower V-content, (18 and 7 at.%), were observed, the later was shifted to larger d-spacing compared to the pure γ-Al2O3 sample obtained if deposited with only Al-target. Annealing the Al-rich coatings in air resulted in formation of V2O5 crystals on the surface of the coating after annealing to 500 °C for 42 at.% V and 700 °C for 18 at.% V metal fraction respectively. The highest thermal stability was shown for pure γ-Al2O3-coating which transformed to α-Al2O3 after annealing to 1100° C. Highest hardness was observed for the Al-rich oxides, ~24 GPa. The hardness then decreases with increasing V-content, larger than 7 at.% V metal fraction. Doping the Al2O3 coating with 7 at.% V resulted in a significant surface smoothening compared to the binary oxide. The measured hardness after annealing in air decreased in conjunction with the onset of further oxidation of the coatings. This work increases the understanding of this complicated material system with respect to possible phases formed with pulsed DC magnetron sputtering deposition as well as their response to annealing in air. The inherent difficulties of depositing insulating oxide films with PVD, requiring a closed electrical circuit, makes the investigation of process stability an important part of this research. In this context, I investigated the influence of adding small amount of Si in Al-Cr cathode on the coating properties in a pulsed DC industrial cathodic arc system and the plasma characteristics, process parameters, and coating properties in a lab DC cathodic arc system. Si was chosen here due to a previous study showing improved erosion behavior of Al-Cr-Si over pure Al-Cr cathode without Si incorporation in the coating. The effect of Si in the Al-Cr cathode in the industrial cathodic arc system showed slight improvements on the cathode erosion but Si was found in all coatings where Si was added in the cathode. The Si addition promoted the formation of the B1-like metastable cubic oxide phase and the incorporation led to reduced or equal hardness values compared to the corresponding Si-free processes. The DC-arc plasma study on the same material system showed only small improvements in the cathode erosion and process stability (lower pressure and cathode voltage) when introducing 5 at.% Si in the Al70Cr30-cathode. The presence of volatile SiO species could be confirmed through plasma analysis, but the loss of Si through these species was negligible, since the coating composition matched the cathode composition also under these conditions. The positive effect of added Si on the process stability at the cathode surface, should be weighed against Si incorporation in the coating. This incorporation seems to lead to a reduction in mechanical properties in the as-deposited coatings and promote the formation of a B1-like cubic metastable oxide structure for the (Al,Cr)2O3 oxide. This formation may or may not be beneficial for the final application since literature indicates a slight stabilization of the metastable phase upon Si-incorporation, contrary to the effect of Cr, which stabilizes the α-phase. The thermal stability of alloys for metal cutting application is crucial for their use. Previous studies on another alloy system, Cr-Zr-O, had shown solid solution, for Cr-rich compositions in that material system, in the sought corundum structure. The thermal stability of α-Cr0.28Zr0.10O0.61 coating deposited by reactive radio frequency (RF)-magnetron sputtering at 500 °C was therefore investigated here after annealing in vacuum up to 870 °C. The annealed samples showed transformation of α-(Cr,Zr)2O3 and amorphous ZrOx-rich areas into tetragonal ZrO2 and bcc-Cr. The instability of the α-(Cr,Zr)2O3 is surprising and possibly related to the annealing being done under vacuum, facilitating the loss of oxygen. Further in situ synchrotron XRD annealing studies on the α-Cr0.28Zr0.10O0.61 coating in air and in vacuum showed increased stability for the air annealed sample up to at least 975 °C, accompanied with a slight increase in ex-situ measured nanohardness. The onset temperature for formation of tetragonal ZrO2 was similar to that for isothermally vacuum annealing. The synchrotron-vacuum annealed coating again decomposed into bcc-Cr and t-ZrO2, with an addition of monoclinic–ZrO2 due to grain growth. The stabilization of the room temperature metastable tetragonal ZrO2 phase, due to surface energy effects present with small grains sizes, may prove to be useful for metal cutting applications. The observed phase segregation of α-(Cr,Zr)2O3 and formation of tetragonal ZrO2 with corresponding increase in hardness for this pseudobinary oxide system also opens up design routes for pseudobinary oxides with tunable microstructural and mechanical properties.