Download or read book The Solid vacuum Interface V written by Vladimír Ponec and published by . This book was released on 1979 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surfaces and Interfaces of Solid Materials written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfaces and Interfaces of Solid Materials emphasises both experimental and theoretical aspects of surface and interface physics. Beside the techniques of preparing well-defined solid surfaces and interfaces basic models for the description of structural, vibronic and electronic properties of interfaces are described, as well as fundamental aspects of adsorption and layer growth. Because of its importance for modern microelectronics special emphasis is placed on the electronic properties of semiconductor interfaces and heterostructures. Experimental topics covering the basics of ultrahigh-vacuum technology, electron optics, surface spectroscopies and electrical interface characterization techniques are presented in the form of separate panels.

Download or read book Solid Surfaces Interfaces and Thin Films written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2010-09-02 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Surfaces, Interfaces and Thin Films examines both experimental and theoretical aspects of surface, interface and thin film physics. Coverage of magnetic thin films has been expanded, and now includes giant magnetoresistance and the spin-transfer torque mechanism.

Download or read book Surfaces and Interfaces of Solids written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Surfaces and Interfaces of Solids" emphasizes both experimental and theoretical aspects of surface and interface physics. Beside the techniques of preparing well-defined solid surfaces and interfaces basic models for the description of structural, vibronic and electronic properties ofinterfaces are described, as well as fundamental aspects of adsorption and layer growth. Because of its importance for modern microelectronics special emphasis is placed on the electronic properties of semiconductorinterfaces and heterostructures. Experimental topics covering the basics of ultrahigh-vacuum technology, electron optics, surface spectroscopies and electrical interface characterization techniques are presented in the form of separate panels.

Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.

Download or read book Advanced Ceramic Coatings and Interfaces V written by Dongming Zhu and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume contains sixteen contributed papers from the symposium, with topics including advanced coating processing, advanced coating for wear, corrosion, and oxidation resistance, and thermal and mechanical properties, highlighting the state-of-the-art ceramic coatings technologies for various critical engineering applications.

Download or read book Advances in Electronics and Electron Physics written by and published by Academic Press. This book was released on 1980-10-24 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Electronics and Electron Physics

Download or read book Progress In Computational Physics Of Matter Methods Software And Applications written by Franca Manghi and published by World Scientific. This book was released on 1995-12-21 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to describe some of the recent advances, through computer simulation in a broad sense, in the understanding of the complex processes occurring in solids and liquids.The rapid growth of computer power, including the new parallel processors, has stimulated a ferment of new theoretical and computational ideas, which have been developed in particular by the authors in a pluriennal research project supported by Consiglio Nazionale delle Ricerche (CNR) for the development of novel software for large scale computations.The book will cover advances in ab initio (Car-Parrinello) molecular dynamics, quantum monte carlo simulations, self-consistent density functional computation of electronic states, classical molecular dynamics simulation of thermodynamic processes, chemical reactions and transport properties.Besides the description of the results of these techniques in leading edge applications, the book will address specific aspects of the algorithms and software which have been developed by the authors in order to implement in an efficient way the new theoretical advances in these computationally intensive problems.These aspects which are generally not discussed in any detail in the literature, can be of great help for newcomers in the field.

Download or read book Electronic Properties of Semiconductor Interfaces written by Winfried Mönch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the continuum of interface-induced gap states (IFIGS) as a unifying theme, Mönch explains the band-structure lineup at all types of semiconductor interfaces. These intrinsic IFIGS are the wave-function tails of electron states, which overlap a semiconductor band-gap exactly at the interface, so they originate from the quantum-mechanical tunnel effect. He shows that a more chemical view relates the IFIGS to the partial ionic character of the covalent interface-bonds and that the charge transfer across the interface may be modeled by generalizing Pauling?s electronegativity concept. The IFIGS-and-electronegativity theory is used to quantitatively explain the barrier heights and band offsets of well-characterized Schottky contacts and semiconductor heterostructures, respectively.

Download or read book Fundamental Aspects of Inert Gases in Solids written by S.E. Donnelly and published by Springer. This book was released on 2013-12-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Research Workshop on Fundamental Aspects of Inert Gases in Solids, held at Bonas, France from 16-22 September 1990, was the fifth in a series of meetings that have been held in this topic area since 1979. The Consultants' Meeting in that year at Harwell on Rare Gas Behaviour in Metals and Ionic Solids was followed in 1982 by the Jiilich Inter national Symposium on Fundamental Aspects of Helium in Metals. Two smaller meetings have followed-a CECAM organised workshop on Helium Bubbles in Metals was held at Orsay, France in 1986 while in February 1989, a Topical Symposium on Noble Gases in Metals was held in Las Vegas as part of the large TMS/AIME Spring Meeting. As is well known, the dominating feature of inert gas atoms in most solids is their high heat of solution, leading in most situations to an essentially zero solubility and gas-atom precipita tion. In organising the workshop, one particular aim was to target the researchers in the field of inert-gas/solid interactions from three different areas--namely metals, tritides and nuclear fuels-in order to encourage and foster the cross-fertilisation of approaches and ideas. In these three material classes, the behaviour of inert gases in metals has probably been most studied, partly from technological considerations-the effects of helium production via (n, a) reac tions during neutron irradiation are of importance, particularly in a fusion reactor environ ment-and partly from a more fundamental viewpoint.

Download or read book Electron and Ion Spectroscopy of Solids written by L. Fiermans and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface physics and chemistry have in recent years become one of the most active fields in solid state research. A number of techniques have been developed, and both the experimental aspect and the correlated theory are evolving at an extremely fast rate. Electron and ion spectroscopy are of major importance in this development. In this volume, which contains edited and extended versions of eight sets of lectures given at the NATO Advanced Study Institute held at Ghent, Belgium, from August 29 to September 9, 1977, a re view of the state of the art in these fields is given from both an experimental and a theoretical point of view. Electron emission techniques such as UPS (ultraviolet photoemission spectroscopy), XPS (x-ray photoemission spectroscopy), and AES (Auger electron spectroscopy) constitute the major part of this volume, reflecting the fact that they continue to be the most widely applied surface techniques. Recent developments in the application of synchrotron radiation to angle-resolved photoelectron spectroscopy are extensively covered, from an experimental point of view by Prof. W. E. Spicer (Stanford University, U.S.A.) and from a theoretical point of view by Dr. A. Liebsch (Kernforschungsanlage Julich, Germany). Emphasis is put on the study of energy bands in layered structures, and on chemisorption on well-defined surfaces. Chemisorption and catalysis on metals is treated in detail by Prof. G. Ertl (Universitat Munchen, Germany). This chapter contains a review of the application of the different surface techniques to specific surface systems.

Download or read book Critical Phenomena at Surfaces and Interfaces written by Helmut Dosch and published by Springer. This book was released on 2006-04-11 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of grazing angle x-ray and neutron scattering to the study of surface-induced critical phenomena. With the advent of even more advanced synchrotron radiation sources and new sophisticated instrumentation this novel technique is expected to experience a boom. The comprehensive and detailed presentation of theoretical and experimental aspects of the scattering of evanascent x-ray and neutron waves inside a solid makes this book particularly useful for tutorial courses. Particular emphasis is put on the use of this technique to extract microscopic information (correlation functions) from the real structure of a surface, from buried and magnetic interfaces and from surface roughness.

Download or read book Acid base Interactions written by K. L. Mittal and published by VSP. This book was released on 2000-09-28 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Second International Symposium on Acid-Base Interactions: Relevance to Adhesion Science and Technology held in Newark, New Jersey, October 19--21, 1998. Since the first symposium on this topic was held on the occasion of the 75th birthday of Professor Frederick M. Fowkes in 1990, it was deemed opportune and necessary to hold the second symposium on this topic. This symposium was organized with the following objectives in mind: (i) to consolidate the R&D activity carried out since the first symposium, (ii) to provide a forum for discussion of latest research results, (iii) to provide an opportunity for cross-pollination of ideas, (iv) to identify topics where there was discordance of opinion or discrepancy, and (v) to highlight areas which needed intensified R&D activities. The final technical program contained a total of 36 papers by researchers and technologists from academia, industry and other organizations. This book contains a total of 32 papers, which were rigorously peer reviewed and suitably revised before inclusion in this book. The book is divided into three parts as follows: Part 1: Fundamental Aspects of Acid-Base Interactions; Part 2: Characterization of the Acid-Base Properties of Materials; and Part 3: Applications of Acid-Base Interactions. The topics covered include: Surface free energy acid-base theory applied to solid surfaces; Good, van Oss and Chaudhury theory; contact angle measurements and interpretation; acid-base theory of contact angles; acid-base strength of solid surfaces; acid-base interactions at solid surfaces; acid-base interactions at the molecular level; characterization of acid-base properties of a host of materials (polymers, wood, glass, ceramics, silica particles, textile fibers, rocks) by XPS, inverse gas chromatography, immersion calorimetry, contact angle titration, and thin layer wicking; and relevance of acid-base interactions to bioadhesion, microbial adhesion, polymer adhesion, and adhesion in reinforced polymer composites.

Download or read book Simple Views on Condensed Matter written by Pierre-Gilles de Gennes and published by World Scientific. This book was released on 1998 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of important papers by P-G de Gennes (1991 Nobel Prize Winner in Physics) which have had a long-lasting impact on our understanding of condensed matter (solid state physics, liquid crystals, polymers, interfaces, wetting and adhesion). A typical example is the original article on "reptation" of polymer chains. The author has added some "afterthoughts" to the main papers (explaining their successes or weaknesses), and the current views on each special problem. Complex systems (polymers or granular matters, etc) are explained without heavy calculations -- using simple scaling laws as the main tool.

Download or read book Surfaces and Interfaces of Electronic Materials written by Leonard J. Brillson and published by John Wiley & Sons. This book was released on 2010-04-26 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level textbook covering geometric, chemical, and electronic structure of electronic materials, and their applications to devices based on semiconductor surfaces, metal-semiconductor interfaces, and semiconductor heterojunctions. Starting with the fundamentals of electrical measurements on semiconductor interfaces, it then describes the importance of controlling macroscopic electrical properties by atomic-scale techniques. Subsequent chapters present the wide range of surface and interface techniques available to characterize electronic, optical, chemical, and structural properties of electronic materials, including semiconductors, insulators, nanostructures, and organics. The essential physics and chemistry underlying each technique is described in sufficient depth with references to the most authoritative sources for more exhaustive discussions, while numerous examples are provided throughout to illustrate the applications of each technique. With its general reading lists, extensive citations to the text, and problem sets appended to all chapters, this is ideal for students of electrical engineering, physics and materials science. It equally serves as a reference for physicists, material science and electrical and electronic engineers involved in surface and interface science, semiconductor processing, and device modeling and design. This is a coproduction of Wiley and IEEE * Free solutions manual available for lecturers at www.wiley-vch.de/supplements/

Download or read book Experimental Methods in Catalytic Research written by Robert B. Anderson and published by Academic Press. This book was released on 2013-10-22 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Methods in Catalytic Research, Volume I provides a useful account of procedures in various areas of catalytic research. This book describes the method and its fundamental principles, the apparatus used, the data obtained and their interpretation, and the account of the special problems related to catalytic research. Organized into 11 chapters, this volume begins with an overview of the kinetic phenomena such as quantitative studies of reaction rate and factors influencing rate. This text then examines the general properties that are of major importance to catalysis since catalytic rates depend mainly on available active surface. Other chapters consider the detailed mechanism of any catalytic reaction, which include the electronic structure of the chemisorption bond. This book discusses as well several experimental methods developed to study surface reactions under highly idealized conditions. The final chapter deals with the phenomenon associated with the spin of an electron. This book is a valuable resource for chemical engineers.

Download or read book Nanoscale Probes of the Solid Liquid Interface written by Andrew A. Gewirth and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Probes of the Solid--Liquid Interface deals with the use of the scanning tunnelling microscope (STM) and related instrumentation to examine the phenomena occurring at the interface between solid and liquid. Scanning probe microscopy (the collective term for such instruments as the STM, the atomic force microscope and related instrumentation) allows detailed, real space atomic or lattice scale insight into surface structures, information which is ideally correlated with surface reactivity. The use of SPM methods is not restricted to ultrahigh vacuum: the STM and AFM have been used on samples immersed in solution or in ambient air, thus permitting a study of environmental effects on surfaces. At the solid--liquid interface the reactivity derives precisely from the presence of the solution and, in many cases, the application of an external potential. Topics covered in the present volume include: the advantages of studying the solid--liquid interface and the obtaining of additional information from probe measurements; interrelationships between probe tip, the interface and the tunnelling process; STM measurements on semiconductor surfaces; the scanning electrochemical microscope, AFM and the solid--liquid interface; surface X-ray scattering; cluster formation on graphite electrodes; Cu deposition on Au surfaces; macroscopic events following Cu deposition; deposition of small metallic clusters on carbon; overpotential deposition of metals; underpotential deposition; STM on nanoscale ceramic superlattices; reconstruction events on Au(ijk) surfaces; Au surface reconstructions; friction force measurements on graphite steps under potential control; and the biocompatibility of materials.