Download or read book Behaviour of Granular Materials written by Bernard Cambou and published by Springer. This book was released on 2014-05-04 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete and comprehensive analysis of the behaviour of granular materials including the description of experimental results, the different ways to define the global behaviour from local phenomena at the particle scale, the various modellings which can be used for a D.E.M. analysis to solve practical problems and finally the analysis of strain localisation. The concepts developed in this book are applicable to many kinds of granular materials considered in civil, mechanical or chemical engineering.
Download or read book Pre failure Deformation Characteristics of Geomaterials written by Jamiolkowski and published by CRC Press. This book was released on 2001 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes from the 1999 conference (v.1 was published in 1999) makes available the opening lecture on pre-failure behavior of soils as construction materials, as well as 24 contributions on various themes of the conference, laboratory tests, in situ tests, stress-strain behavior, applications and case histories. Some specific topics include time-dependent deformation characteristics of stiff geomaterials, boundary value problems in geotechnical engineering, and the effect of reinforcement due to choice of geogrid. There is no subject index. c. Book News Inc.
Download or read book Geomechanics and Geotechnics of Particulate Media written by Masayuki Hyodo and published by CRC Press. This book was released on 2006-08-17 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopic re-examination of geomaterials consisting of aggregates can shed light on macroscopic behaviour, including compressibility, anisotropy, yielding, creep, cyclic liquefaction and shear rupture. As a result of this process of examination, new methods of material characterization emerge, leading to a greater degree of accuracy in the specification of new constitutive models with physically-meaningful parameters. The impetus behind this development is an increasing awareness on sustainability, leading to the more efficient use of recycled materials for geotechnical applications. The characteristics of recycled materials, such as compressibility and self-hardening, may differ significantly from those of natural materials, and it is crucial that evaluation is made from a specifically particulate perspective.
Download or read book The Behavior of Large Particles Falling in Quiescent Liquids written by G. E. Stringham and published by . This book was released on 1969 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particulate Discrete Element Modelling written by Catherine O'Sullivan and published by CRC Press. This book was released on 2011-04-06 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first single work on DEM providing the information to get started with this powerful numerical modelling approach. Provides the basic details of the numerical method and the approaches used to interpret the results of DEM simulations. It will be of use to professionals, researchers and higher level students, with a theoretical overview of DEM as well as practical guidance.Selected Contents: 1.Introduction 2.Use of DEM in Geomechanics 3.Calculation of Contact Forces 4.Particle Motion 5.Particle Types 6.Boundary Conditions 7.Initial Geometry and Specimen Generation 8.Time Integration and Discrete Element Modelling 9.DEM Interpretation: A Continuum Perspective 10.Postprocessing: Graphical Interpretation of DEM Simulations 11.Basic Statisti
Download or read book Geomechanics from Micro to Macro written by Kenichi Soga and published by CRC Press. This book was released on 2014-08-26 with total page 1668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati
Download or read book Geomechanics and Geotechnics of Particulate Media written by Masayuki Hyodo and published by CRC Press. This book was released on 2017-12-14 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopic re-examination of geomaterials consisting of aggregates can shed light on macroscopic behaviour, including compressibility, anisotropy, yielding, creep, cyclic liquefaction and shear rupture. As a result of this process of examination, new methods of material characterization emerge, leading to a greater degree of accuracy in the specification of new constitutive models with physically-meaningful parameters. The impetus behind this development is an increasing awareness on sustainability, leading to the more efficient use of recycled materials for geotechnical applications. The characteristics of recycled materials, such as compressibility and self-hardening, may differ significantly from those of natural materials, and it is crucial that evaluation is made from a specifically particulate perspective.
Download or read book Rigidity Theory and Applications written by M.F. Thorpe and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although rigidity has been studied since the time of Lagrange (1788) and Maxwell (1864), it is only in the last twenty-five years that it has begun to find applications in the basic sciences. The modern era starts with Laman (1970), who made the subject rigorous in two dimensions, followed by the development of computer algorithms that can test over a million sites in seconds and find the rigid regions, and the associated pivots, leading to many applications. This workshop was organized to bring together leading researchers studying the underlying theory, and to explore the various areas of science where applications of these ideas are being implemented.
Download or read book Geotechnical Properties Behavior and Performance of Calcareous Soils written by K. R. Demars and published by ASTM International. This book was released on 1982 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Relative Density and Its Role in Geotechnical Projects Involving Cohesionless Soils written by Ernest Theodore Selig and published by ASTM International. This book was released on 1973 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Delft Sand Clay and Rock Cutting Model written by S.A. Miedema and published by IOS Press. This book was released on 2014-10-29 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions, and the methods necessary to accomplish them consequently vary widely. This book provides an overview of cutting theories. It begins with a generic model, valid for all types of soil (sand, clay and rock), and continues with the specifics of dry sand, water-saturated sand, clay, atmospheric rock and hyperbaric rock. Small blade angles and large blade angles are discussed for each soil type, and for each case considered the equations/model for cutting forces, power and specific energy are given. With models verified by laboratory research, principally from the Delft University of Technology, and data from other recognized sources, this book will prove an invaluable reference for anybody whose work involves major excavations of any kind.
Download or read book Numerical Modelling of Construction Processes in Geotechnical Engineering for Urban Environment written by Theodoros Triantafyllidis and published by CRC Press. This book was released on 2006-02-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly important, particularly in an urban environment, to predict soil behaviour and to confine the settlement or deformation of buildings adjacent to construction sites. One important factor is the choice of construction procedure for the installation of piles, sheet pile walls, anchors or for soil improvement techniques, ground freezing and tunnelling methods. The modelling of construction processes, which are frequently associated with large deformations of the soil and with strong changes in the structure of the soil around the construction plant, in the case of, for example, a drill, a bit, a vibrator, or an excavation tool, requires sophisticated and new methods in numerical modelling. Often the simulation of the construction procedure is neglected in the calculations. Such methods are described and discussed in this book, as are examples of the methods applied to geotechnical practice, field and laboratory testing as well as case studies. This volume provides a valuable source of reference for scientists in geotechnical engineering and numerical modelling, geotechnical engineers, post graduate students, construction companies and consultants, manufacturers of geotechnical construction plants and software suppliers and developers of geotechnical construction methods.
Download or read book Challenges and Innovations in Geotechnics written by Askar Zhussupbekov and published by CRC Press. This book was released on 2016-12-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges and Innovations in Geotechnics is a collections of papers presented at the Eighth Asian Young Geotechnical Engineering Conference (8AYGEC, Astana, Kazakhstan, 5-7 August 2016), and covers various aspects the areas of soil mechanics and geotechnical engineering. The book contains special and keynote lectures and contributions on a wide range of topics in geotechnical engineering and construction: (1) Laboratory and Field Testing (2) Foundation and Underground Structure (3) Ground Improvement (4) Earthquake and Environment (5) Numerical and Analytical Modeling (6) Advanced Soil Mechanics (7) Historical Sites Challenges and Innovations in Geotechnics was published under the auspices of the ISSMGE TC-305 ‘Geotechnical Infrastructures for Megacities and New Capitals’, and reflects the present and future state of geotechnical engineering. The book will be extremely useful to geoengineers and researchers in the abovementioned areas.
Download or read book Handbook of Research on Advanced Computational Techniques for Simulation Based Engineering written by Samui, Pijush and published by IGI Global. This book was released on 2015-11-30 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in information processing systems have driven the advancement of computational methods in the engineering realm. New models and simulations enable better solutions for problem-solving and overall process improvement. The Handbook of Research on Advanced Computational Techniques for Simulation-Based Engineering is an authoritative reference work representing the latest scholarly research on the application of computational models to improve the quality of engineering design. Featuring extensive coverage on a range of topics from various engineering disciplines, including, but not limited to, soft computing methods, comparative studies, and hybrid approaches, this book is a comprehensive reference source for students, professional engineers, and researchers interested in the application of computational methods for engineering design.
Download or read book Deformation Characteristics of Geomaterials written by H. DiBenedetto and published by CRC Press. This book was released on 2005-03-03 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solutions for soil engineering and soil-structure interaction problems need realistic and pertinent experimental and modelling tools. In this work, extensive developments proposed by the invited speakers of the Lyon International Symposium held in September 2003 are presented, including experimental investigations into deformation properties; laboratory, in-situ and field observation interpretations; behaviour characterisation and modelling; and case histories. The contributions include recent investigations into anisotropy and non-linearity, the effects of stress-strain-time history, ageing and time effects, yielding, failure and flow, cyclic and dynamic behaviour. In addition, advanced geotechnical testing is applied to real engineering problems, and to ways of synthesising information from a range of sources while engaging in practical site characterisation studies.
Download or read book Modelling of Soil Behaviour with Hypoplasticity written by David Mašín and published by Springer. This book was released on 2018-12-12 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the hypoplastic modelling framework. It is divided into two parts, the first of which is devoted to principles of hypoplasticity. First, the basic features of soil’s mechanical behaviour are introduced, namely non-linearity and asymptotic properties. These features are then incorporated into simple one-dimensional hypoplastic equations for compression and shear. Subsequently, a hypoplastic equivalent of the Modified Cam-Clay model is developed in 2D space using stress and strain invariants to demonstrate key similarities and differences between elasto-plastic and hypoplastic formulations. Lastly, the mathematical structure of hypoplastic models is explained by tracing their historical development, from the early trial-and-error models to more recent approaches. In turn, Part II introduces specific hypoplastic models for soils. First, two reference models for sand and clay are defined. After summarising their mathematical formulations, calibration procedures are described and discussed. Subsequently, more advanced modelling approaches are covered: the intergranular strain concept incorporating the effects of small strain stiffness and cyclic loading, viscohypoplasticity for predicting rate effects, soil structure to represent structured and bonded materials and soil anisotropy. The book concludes with a description of partial saturation and thermal effects: topics that are increasingly important to the disciplines of energy and environmental geotechnics. Selecting a constitutive model and its parameters is often the most important and yet challenging part of any numerical analysis in geotechnical engineering. Hypoplasticity involves a specific class of soil constitutive models, which are described in detail here. The book offers an essential resource, both for model users who need a more advanced model for their geotechnical calculations and are mainly interested in parameter calibration procedures, and for model developers who are seeking a comprehensive understanding of the mathematical structure of hypoplasticity.
Download or read book Characterization and Behavior of Interfaces written by J. David Frost and published by IOS Press. This book was released on 2010 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces exist in every geotechnical system in many forms and at multiple scales. Although historically, they are often considered to be the weak link in a system, particularly as the result of a number of unexpected catastrophic failures, new insight gained over the past twenty years by researchers around the world has shown that it is possible to select combinations of materials and design an engineered interface so that it is at least as strong as the surrounding materials. These new insights have been gained as a result of experimental study, numerical modeling and analytical investigation of successful and failed systems. While individual technical papers have been presented and/or published in various forums and proceedings over the years, no technical event has ever been convened for the sole purpose of allowing for exchange of information and ideas pertaining to geotechnical interfaces. The research symposium held in September 2008 in Atlanta Georgia, USA, in conjunction with the Fourth International Symposium on Deformation Characteristics of Geomaterials (IS Atlanta 2008) at the Georgia Institute of Technology on The Characterization and Behavior of Interfaces addressed this deficiency and the papers presented at that event are contained in this publication. IOS Press is an international science, technical and medical publisher of high-quality books for academics, scientists, and professionals in all fields. Some of the areas we publish in: -Biomedicine -Oncology -Artificial intelligence -Databases and information systems -Maritime engineering -Nanotechnology -Geoengineering -All aspects of physics -E-governance -E-commerce -The knowledge economy -Urban studies -Arms control -Understanding and responding to terrorism -Medical informatics -Computer Sciences
