Download or read book The Selective Catalytic Cracking of Fischer Tropsch Liquids to High Value Transportation Fuels Quarterly Technical Progress Report No 5 First Quarter Fiscal Year 1993 October 1 1992 December 31 1992 written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fischer Tropsch Synthesis in Supercritical Fluids Quarterly Technical Progress Report October 1 1993 December 31 1993 written by and published by . This book was released on 1993 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Objectives for the first quarter for Task A, Diffusion Coefficients of F-T Products in Supercritical Fluids, were to measure diffusion coefficients of 1-tetradecene in subcritical propane and the diffusion coefficients of 1-octene and 1-tetradecene in subcritical propane and the diffusion coefficients of 1-octene and 1-tetradecene in subcritical and supercritical ethane. We planned to use ethane as a solvent because its lower critical temperature enabled measurements without modification of the existing unit. Our objective was to investigate the behavior of the diffusion coefficients in crossing from subcritical to supercritical conditions. Objectives for Task B, Fischer Tropsch reaction related studies, were: (1) to install and test the temperature probe and the flammable gas detector: (2) to conduct Fischer-Tropsch experiments at baseline conditions and at a high pressure in order to test the newly constructed fixed bed reactor assembly. Accomplishments and problems, are presented.

Download or read book The Potential and Challenges of Drop In Biofuels written by Sergios Karatzos and published by . This book was released on 2014 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Annual Energy Outlook 2016 With Projections to 2040 written by Energy Dept., Energy Information Administration and published by Government Printing Office. This book was released on 2017-02-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Annual Energy Outlook 2016 presents long-term projections of energy supply, demand, and prices through 2040. The projections, focused on U.S. energy markets, are based on results from EIA's National Energy Modeling System which enables EIA to make projections under alternative, internally consistent sets of assumptions.

Download or read book Handbook of Biomass Downdraft Gasifier Engine Systems written by Thomas B. Reed and published by Biomass Energy Foundation. This book was released on 1988 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book Municipal Solid Waste to Energy Conversion Processes written by Gary C. Young and published by John Wiley & Sons. This book was released on 2010-11-29 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: MUNICIPAL SOLID WASTE TO ENERGY CONVERSION PROCESSES A TECHNICAL AND ECONOMIC REVIEW OF EMERGING WASTE DISPOSAL TECHNOLOGIES Intended for a wide audience ranging from engineers and academics to decision-makers in both the public and private sectors, Municipal Solid Waste to Energy Conversion Processes: Economic, Technical, and Renewable Comparisons reviews the current state of the solid waste disposal industry. It details how the proven plasma gasification technology can be used to manage Municipal Solid Waste (MSW) and to generate energy and revenues for local communities in an environmentally safe manner with essentially no wastes. Beginning with an introduction to pyrolysis/gasification and combustion technologies, the book provides many case studies on various waste-to-energy (WTE) technologies and creates an economic and technical baseline from which all current and emerging WTE technologies could be compared and evaluated. Topics include: Pyrolysis/gasification technology, the most suitable and economically viable approach for the management of wastes Combustion technology Other renewable energy resources including wind and hydroelectric energy Plasma economics Cash flows as a revenue source for waste solids-to-energy management Plant operations, with an independent case study of Eco-Valley plant in Utashinai, Japan Extensive case studies of garbage to liquid fuels, wastes to electricity, and wastes to power ethanol plants illustrate how currently generated MSW and past wastes in landfills can be processed with proven plasma gasification technology to eliminate air and water pollution from landfills.

Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. - Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies - Reviews the current status and future developments of key technologies involved in IGCC plants - Provides several case studies of existing IGCC plants around the world

Download or read book Handbook of Bioenergy Crops written by N. El Bassam and published by Earthscan. This book was released on 2010 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised second edition includes new information on biomass in relation to climate change, new coverage of vital issues including the "food versus fuel" debate, and essential new information on "second generation" fuels and advances in conversion techniques. The book begins with a guide to biomass accumulation, harvesting, transportation and storage, as well as conversion technologies for biofuels. This is followed by an examination of the environmental impact and economic and social dimensions, including prospects for renewable energy. The book then goes on to cover all the main potential energy crops.

Download or read book The Performance Economy written by W. Stahel and published by Springer. This book was released on 2010-02-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and revised edition outlines strategies and models for how to use technology and knowledge to improve performance, create jobs and increase income. It shows what skills will be required to produce, sell and manage performance over time, and how manual jobs can contribute to reduce the consumption of non-renewable resources.

Download or read book Annual Energy Outlook 2012 with Projections To 2035 written by Energy Information Administration (U S ) and published by Government Printing Office. This book was released on 2012-10-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The projections in the U.S. Energy Information Administration's (EIA's) Annual Energy Outlook 2012 (AEO2012) focus on the factors that shape the U.S. energy system over the long term. Under the assumption that current laws and regulations remain unchanged throughout the projections, the AEO2012 Reference case provides the basis for examination and discussion of energy production, consumption, technology, and market trends and the direction they may take in the future. It also serves as a starting point for analysis of potential changes in energy policies. But AEO2012 is not limited to the Reference case. It also includes 29 alternative cases (see Appendix E, Table E1), which explore important areas of uncertainty for markets, technologies, and policies in the U.S. energy economy. Many of the implications of the alternative cases are discussed in the 'Issues in focus' section of this report. / Key results highlighted in AEO2012 include continued modest growth in demand for energy over the next 25 years and increased domestic crude oil and natural gas production, largely driven by rising production from tight oil and shale resources. As a result, U.S. reliance on imported oil is reduced; domestic production of natural gas exceeds consumption, allowing for net exports; a growing share of U.S. electric power generation is met with natural gas and renewables; and energy-related carbon dioxide emissions remain below their 2005 level from 2010 to 2035, even in the absence of new Federal policies designed to mitigate greenhouse gas (GHG) emissions."--Executive Summary (p. 2).

Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.

Download or read book Coal Gasification and Its Applications written by David A. Bell and published by William Andrew. This book was released on 2010-12-08 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Skyrocketing energy costs have spurred renewed interest in coal gasification. Currently available information on this subject needs to be updated, however, and focused on specific coals and end products. For example, carbon capture and sequestration, previously given little attention, now has a prominent role in coal conversion processes.This book approaches coal gasification and related technologies from a process engineering point of view, with topics chosen to aid the process engineer who is interested in a complete, coal-to-products system. It provides a perspective for engineers and scientists who analyze and improve components of coal conversion processes.The first topic describes the nature and availability of coal. Next, the fundamentals of gasification are described, followed by a description of gasification technologies and gas cleaning processes. The conversion of syngas to electricity, fuels and chemicals is then discussed. Finally, process economics are covered. Emphasis is given to the selection of gasification technology based on the type of coal fed to the gasifier and desired end product: E.g., lower temperature gasifiers produce substantial quantities of methane, which is undesirable in an ammonia synthesis feed. This book also reviews gasification kinetics which is informed by recent papers and process design studies by the US Department of Energy and other groups, and also largely ignored by other gasification books.• Approaches coal gasification and related technologies from a process engineering point of view, providing a perspective for engineers and scientists who analyze and improve components of coal conversion processes • Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes • Emphasizes the importance of the coal types fed to the gasifier and desired end products • Covers gasification kinetics, which was largely ignored by other gasification books - Provides a perspective for engineers and scientists who analyze and improve components of the coal conversion processes - Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes - Covers gasification kinetics, which was largely ignored by other gasification books

Download or read book Sustainable Strategies for the Upgrading of Natural Gas Fundamentals Challenges and Opportunities written by E.G. Derouane and published by Springer Science & Business Media. This book was released on 2005-06-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy and feedstock materials for the chemical industry are in increasing demand and, with constraints related to the availability and use of oil, the energy and chemical industry is undergoing considerable changes. In recent years, major restructuring has occurred in the oil, petrochemical, and chemical industry, with increasing attention devoted to the use of natural gas, methane in particular, as a chemical feedstock rather than just as a fuel. The conversion of remote natural gas into liquid fuels or other transportable chemicals is a challenge to industrial catalysis. Few processes exist so far with the major ones involving the conversion of natural gas to synthesis gas by steam reforming, CO2 reforming, or partial oxidation, followed by the syntheses of methanol, hydrocarbons (Fischer-Tropsch synthesis), or ammonia. In this book, a comprehensive overview of the field of processing natural gas is given, through a series of chapters written by leading scientists and engineers in the field. New developments are discussed and current work relevant to the area is shown by a series of recent works by researchers working in this and related fields.

Download or read book Globalisation Transport and the Environment written by OECD and published by OECD Publishing. This book was released on 2010-01-12 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks in detail at how globalisation has affected activity levels in maritime shipping, aviation, and road and rail freight, and assesses the impact that changes in activity levels have had on the environment.