EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Adhesion and Adhesives

Download or read book Adhesion and Adhesives written by Anthony J. Kinloch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, or so, the growth in the use of adhesives, especially in ever more technically demanding applications, has been rapid and many major developments in the technology of adhesives have been reported. This growth has also led to attention being focused on somewhat more basic studies of the science of adhesion and adhesives, and in recent years our level of fundamental knowledge concerning the formation and mechanical performance of adhesive joints has increased dramatically. Such studies have, of course, been aided greatly by the development of the tools at the disposal of the investigators. For example, specific surface analytical techniques, such as X-ray photoelectron and secondary-ion mass spectroscopy, and the increasingly sophisticated methods of stress analysis and fracture mechanics have been put to good use in furthering our understanding of the science of adhesion and adhesives. The present book attempts to review the multidisciplined subject of adhesion and adhesives, considering both the science and technology involved in the formation and mechanical performance of adhesive joints. The author would like to thank his friends and colleagues for useful discus sions and help in the preparation of this book. I am particularly grateful to P. Cawley, J. Comyn, W. A. Lees, A. C. Roulin-Moloney, W. C. Wake, J. G. Williams and R. J. Young who have read and commented on various chapters and P. Farr for preparing the diagrams.

Book The Science of Adhesive Joints

Download or read book The Science of Adhesive Joints written by J. J. Bikerman and published by Elsevier. This book was released on 2013-10-22 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science of Adhesive Joints, Second Edition, discusses the fundamentals of adhesive joints. The book opens with a discussion on solid surfaces, covering topics such as why adhesives are needed, surface roughness and surface porosity, and adsorption of foreign atoms and molecules by solids. This is followed by separate chapters on fastening devices, solid-to-solid adhesion, the formation of adhints, tack phenomena, the mechanisms of setting, adhesional failures, stresses in adhints, and experimental strength of adhints.

Book Adhesive Joints  Formation  Characteristics and Testing

Download or read book Adhesive Joints Formation Characteristics and Testing written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-27 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Adhesive Joints: Formation, Characteristics and Testing held in Newark, NJ, May 22-24, 2000. Since the first symposium, held in 1982, there had been tremendous research activity dealing with many aspects of adhesive joints. This volume contains a total of 21 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. The book is divided into three parts: 1) General Papers; 2) Evaluation, Analysis and Testing; and 3) Durability Aspects. The topics covered include: molecular brush concepts in enhancing strength of adhesive joints; factors affecting performance of adhesive joints; substrate preparation and modification; interfacial/interphasial aspects; determination of locus of failure; analysis and evaluation of adhesive joints using various techniques; testing of adhesive joints; stress analysis; application of fracture mechanics; durability aspects; accelerated environmental degradation of adhesive joints; solvent uptake; and adhesives with special characteristics. This volume represents a commentary on the current R&D activity in this arena and it should be of great value and interest to anyone interested in adhesive bonding / adhesive joints. Furthermore, this volume contains a number of excellent review/overview articles, which should be of particular value.

Book Hybrid Adhesive Joints

Download or read book Hybrid Adhesive Joints written by Lucas F. M. da Silva and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents treat the material science and mechanical issues of hybrid adhesive bonds which are a combination of adhesive bonding rather than mechanical fasteners. The idea of hybrid joints is to gather the advantages of the different techniques leaving out their problems. Some of the advantages of these joints are a higher static and fatigue strength and a higher stiffness with respect to simple joints, a two-stage cracking process before the final failure and improved durability. The book treats all important kinds of joints which are in use today: weld – adhesive, rivet – adhesive, clinch – adhesive, bolt – adhesive, and adhesive – adhesive. A section dedicated to threadlocking and interference-fit adhesive joints is also included. All sections are treated from a scientific point of view with modeling issues supported by simple coupons testing and a technological point of view where the idea is to present more applied results with practical cases.

Book Structural Adhesive Joints in Engineering

Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.

Book Adhesion Science

Download or read book Adhesion Science written by John Comyn and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of adhesives is widespread and growing, and there are few modern artefacts, from the simple cereal packet, to the jumbo jet, that are without this means of joining. Adhesion Science provides an illuminating account of the science underlying the use of adhesives, a branch of chemical technology which is fundamental to the science of coatings and composite materials and to the performance of all types of bonded structures. This book guides the reader through the essential basic polymer science, and the chemistry of adhesives in use at present. It discusses surface preparation for adhesive bonding, and the use of primers and coupling agents. There is a detailed chapter on contact angles and what can be predicted from them. A simple guide on stress distribution joints and how this relates to testing is included. It also examines the interaction of adhesives and the environment, including an analysis of the resistance of joints to water, oxygen and ultra-violet light. Adhesion Science provides a comprehensive introduction to the chemistry of adhesives, and will be of interest not only to chemists, but also to readers with a background in physical or materials science.

Book Adhesion Science and Engineering

Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.

Book Surface Treatment in Bonding Technology

Download or read book Surface Treatment in Bonding Technology written by Anna Rudawska and published by Academic Press. This book was released on 2019-04-15 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Treatment in Bonding Technology provides valuable advice on surface treatment methods, modern measuring devices, and the appropriate experimentation techniques that are essential to create strong joints with a reliable service life. The book's focus is on the detailed and up-to-date analysis of surface treatment methods for metallic and polymer substrates. An analysis of factors affecting the surface preparation stage, together with advice on selection, is also provided. Essential theory is combined with experimentation techniques and industry practice to provide a guide that is both practical and academically rigorous. Including a general introduction to bonding, as well as coverage of mechanical, chemical and electrochemical methods, this book is the ideal primer for anyone working with or researching adhesive bonding. - Provides detailed descriptions of surface treatments and their mechanisms that will help readers build a deep understanding of these fundamental techniques - Includes a thorough survey of recent advances in research in surface treatments of metals and polymers - Provides technical advice on experimental testing methods throughout the book

Book Applied Adhesive Bonding in Science and Technology

Download or read book Applied Adhesive Bonding in Science and Technology written by Halil Ozer and published by BoD – Books on Demand. This book was released on 2018-02-21 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together scientists and provides the reader with a comprehensive overview of some recent developments in the field of adhesive bonding with the contributions of internationally recognized authors. This book is divided into three sections: "Structural Adhesive Bonding," "Wood Adhesive Bonding," and "Adhesive Bonding in Medical Applications." Each section presents an important review and some applications of the adhesive bonding in various different disciplines. I hope that the book published in open access will help researchers to benefit from it.

Book Advances in Structural Adhesive Bonding

Download or read book Advances in Structural Adhesive Bonding written by David A. Dillard and published by Elsevier. This book was released on 2010-03-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding is often effective, efficient, and often necessary way to join mechanical structures. This important book reviews the most recent improvements in adhesive bonding and their wide-ranging potential in structural engineering.Part one reviews advances in the most commonly used groups of structural adhesives with chapters covering topics such as epoxy, polyurethane, silicone, cyanoacrylate, and acrylic adhesives. The second set of chapters covers the various types of adherends and pre-treatment methods for a range of structural materials such as metals, composites and plastics. Chapters in Part three analyse methods and techniques with topics on joint design, life prediction, fracture mechanics and testing. The final group of chapters gives useful and practical insights into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet and extreme temperatures.With its distinguished editor and international team of contributors, Advances in structural adhesive bonding is a standard reference for structural and chemical engineers in industry and the academic sector. - Reviews advances in the most commonly used groups of structural adhesives including epoxy, silicone and acrylic adhesives - Examines key issues in adhesive selection featuring substrate compatibility and manufacturing demands - Documents advances in bonding metals, plastics and composites recognising problems and limitations

Book Adhesives Technology Handbook

Download or read book Adhesives Technology Handbook written by Sina Ebnesajjad and published by William Andrew. This book was released on 2014-11-26 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology. Provides practitioners of adhesion technology with a complete guide to bonding materials successfully Covers the whole range of commonly used substrates including plastics, metals, elastomers and ceramics, explaining basic principles and describing common materials and application techniques Introduces the range of commercially available adhesives and the selection process alongside the science and technology of adhesion

Book Adhesive Bonding

Download or read book Adhesive Bonding written by Robert D. Adams and published by Elsevier. This book was released on 2005-03-08 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important collection reviews key research on adhesive behaviour and applications in sectors as diverse as construction and automotive engineering. The book is divided into three main parts: fundamentals, mechanical properties and applications. Part one focuses on the basic properties of adhesives, surface assessment and treatment. Part two concentrates on understanding how adhesives perform under stress and the factors affecting fatigue and failure. The final part of the book reviews industry specific applications in areas such as building and construction, transport and electrical engineering.With its distinguished editor and international team of contributors, Adhesive bonding is a standard reference for all those concerned with the industrial application of adhesives. - Essential information for all those concerned with the industrial application of adhesives - This important collection examines adhesives and adhesive bonding for load-bearing applications - Arranged in a user-friendly format with three main sections: fundamentals, generic uses and industry specific applications

Book Fatigue and Fracture of Adhesively Bonded Composite Joints

Download or read book Fatigue and Fracture of Adhesively Bonded Composite Joints written by Anastasios P. Vassilopoulos and published by Elsevier. This book was released on 2014-10-21 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is commonly accepted that the majority of engineering failures happen due to fatigue or fracture phenomena. Adhesive bonding is a prevailing joining technique, widely used for critical connections in composite structures. However, the lack of knowledge regarding fatigue and fracture behaviour, and the shortage of tools for credible fatigue design, hinders the potential benefits of adhesively bonded joints. The demand for reliable and safe structures necessitates deep knowledge in this area in order to avoid catastrophic structural failures. This book reviews recent research in the field of fatigue and fracture of adhesively-bonded composite joints. The first part of the book discusses the experimental investigation of the reliability of adhesively-bonded composite joints, current research on understanding damage mechanisms, fatigue and fracture, durability and ageing as well as implications for design. The second part of the book covers the modelling of bond performance and failure mechanisms in different loading conditions. - A detailed reference work for researchers in aerospace and engineering - Expert coverage of different adhesively bonded composite joint structures - An overview of joint failure

Book Testing Adhesive Joints

Download or read book Testing Adhesive Joints written by Lucas F.M. da Silva and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining techniques such as welding, brazing, riveting and screwing are used by industry all over the world on a daily basis. A further method of joining has also proven to be highly successful: adhesive bonding. Adhesive bonding technology has an extremely broad range of applications. And it is difficult to imagine a product - in the home, in industry, in transportation, or anywhere else for that matter - that does not use adhesives or sealants in some manner. The book focuses on the methodology used for fabricating and testing adhesive and bonded joint specimens. The text covers a wide range of test methods that are used in the field of adhesives, providing vital information for dealing with the range of adhesive properties that are of interest to the adhesive community. With contributions from many experts in the field, the entire breadth of industrial laboratory examples, utilizing different best practice techniques are discussed. The core concept of the book is to provide essential information vital for producing and characterizing adhesives and adhesively bonded joints.

Book Introduction to Adhesive Bonding

Download or read book Introduction to Adhesive Bonding written by Eduardo Andre Sousa Marques and published by John Wiley & Sons. This book was released on 2021-08-23 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Adhesive Bonding A step-by-step introduction to basic principles and practical applications of adhesive bonding, designed for students and professionals alike Adhesive bonding—the process of joining two surfaces using glues, epoxies, plastic agents, and other adhesives—is a major technique with wide applications in industries as a diverse as aerospace, footwear manufacturing, and food packaging. Adhesive bonding holds several advantages over conventional joining techniques, such as uniform stress concentrations, protection of the bonded surfaces or joints, and the ability to join a variety of different materials and irregular surfaces. Introduction to Adhesive Bonding provides an accessible overview of the principles and common applications of adhesive bonding. Using a systematic approach, the authors thoroughly explain each step necessary to achieve a successful adhesive bond, including surface preparation, bonding agent selection, design and construction of bonded joints, health and safety considerations, and quality control. Readers are provided with both the theoretical foundation and practical information required to plan and complete their own adhesive bonding projects. This comprehensive yet reader-friendly volume: Highlights the inherent advantages of adhesive bonding in various applications Describes the use of adhesive bonding in the development of novel and advanced projects in different industries Features numerous real-world examples of adhesive bonding in areas such as the transportation industry, civil engineering, medical applications, and sports equipment Discusses how adhesives enable development of new products and constructions of reduced weight and size Identifies important limitations and durability concerns of the use of adhesives in specific applications Introduction to Adhesive Bonding is an ideal textbook for undergraduate or graduate Engineering and Chemistry programs, and a useful reference for researchers and industry professionals working in fields such as Engineering, Surface and Polymer Chemistry, and Materials Science.

Book Joining of Polymer Metal Hybrid Structures

Download or read book Joining of Polymer Metal Hybrid Structures written by Sergio T. Amancio Filho and published by John Wiley & Sons. This book was released on 2018-02-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the concepts of joining technologies for hybrid structures This book introduces the concepts of joining technology for polymer-metal hybrid structures by addressing current and new joining methods. This is achieved by using a balanced approach focusing on the scientific features (structural, physical, chemical, and metallurgical/polymer science phenomena) and engineering properties (mechanical performance, design, applications, etc.) of the currently available and new joining processes. It covers such topics as mechanical fastening, adhesive bonding, advanced joining methods, and statistical analysis in joining technology. Joining of Polymer-Metal Hybrid Structures: Principles and Applications is structured by joining principles, in adhesion-based, mechanical fastened, and direct-assembly methods. The book discusses such recent technologies as friction riveting, friction spot joining and ultrasonic joining. This is used for applications where the original base material characteristics must remain unchanged. Additional sections cover the main principles of statistical analysis in joining technology (illustrated with examples from the field of polymer-metal joining). Joining methods discussed include mechanical fastening (bolting, screwing, riveting, hinges, and fits of polymers and composites), adhesive bonding, and other advanced joining methods (friction staking, laser welding, induction welding, etc.). Provides a combined engineering and scientific approach used to describe principles, properties, and applications of polymer-metal hybrid joints Describes the current developments in design of experiments and statistical analysis in joining technology with emphasis on joining of polymer-metal hybrid structures Covers recent innovations in joining technology of polymer-metal hybrid joints including friction riveting, friction spot joining, friction staking, and ultrasonic joining Principles illustrated by pictures, 3D-schemes, charts, and drawings using examples from the field of polymer-metal joining Joining of Polymer-Metal Hybrid Structures: Principles and Applications will appeal to chemical, polymer, materials, metallurgical, composites, mechanical, process, product, and welding engineers, scientists and students, technicians, and joining process professionals.

Book Adhesive Bonding

Download or read book Adhesive Bonding written by Walter Brockmann and published by John Wiley & Sons. This book was released on 2009-01-07 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both solid knowledge of the basics as well as expert knowledge is needed to create rigid, long-lasting and material-specific adhesions in the industrial or trade sectors. Information that is extremely difficult and time-consuming to find in the current literature. Written by specialists in various disciplines from both academia and industry, this handbook is the very first to provide such comprehensive knowledge in a compact and well-structured form. Alongside such traditional fields as the properties, chemistry and characteristic behavior of adhesives and adhesive joints, it also treats in detail current practical questions and the manifold applications for adhesives.