Download or read book The Science and Art of Dental Ceramics Volume I written by John W. McLean and published by Quintessenz Verlag. This book was released on 2019-09-11 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a no more rewarding experience in restorative dentistry than to duplicate to perfection the colour, texture and surface anatomy of the human tooth. Dental porcelain is the closest match to tooth enamel of all our restorative materials but is perhaps the most difficult to use in dental practice. A study of the science of dental porcelain will enable the dentist or technician to perfect his art since it develops an increasing awareness of the fundamental problems in construction. Preparation design, the stresses developing in porcelain restorations, the influence of opaque backgrounds on colour, surface reflectivity and light transmission in crowns are some of the complex factors that influence the success of a porcelain veneer restoration. A survey of metals, bonding systems, cements and impression materials will enable the clinician to select his materials with greater confidence. New research on the shoulder preparation for the veneer crown also sheds light on the controversy of the bevel versus the butt joint. The author has attempted to rationalise the use of both metal and alumina reinforced ceramics and to show how no ingle system can be applied universally if optimum aesthetics is to be achieved.

Download or read book The Science and Art of Dental Ceramics Volume II written by John W. McLean and published by Quintessenz Verlag. This book was released on 2019-09-11 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this second volume, with numerous color photographs and diagrams, detailed techniques for making metaloceramic and alumina-reinforced crowns and bridges are presented. Special effects in dental procelain, the Wedge Technique, development of correct anatomy, methods for avoiding loss of detail during glazing, casing technique, surface finishing of metal - these topics and more are critically examined in light of current research.

Download or read book Conference on Recent Developments in Dental Ceramics Volume 6 Issue 1 2 written by William J. Smothers and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Download or read book Current Trends on Glass and Ceramic Materials written by Sooraj H. Nandyala José D. Santos and published by Bentham Science Publishers. This book was released on 2013-01-22 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials created from innovative glass and bioceramic research are emerging as a precursor to several developments useful for solving a wide variety of industry and health related issues. Current Trends on Glass and Ceramic Materials is a review on the latest developments in glass and ceramic materials for technological applications along with biomedical applications in vivo. The volume serves as a useful reference to readers interested in learning about this area of materials science and its multidisciplinary array of applications

Download or read book Ion Exchange written by Ayben Kilislioglu and published by BoD – Books on Demand. This book was released on 2015-09-09 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides broad coverage of ion exchange and its applications. Different chapters focus on the importance of ion exchange applications such as strengtening dental porcelains, gradient changes in glass refraction, and resins as effective sorbents. Each chapter includes a brief historical overview of ion exchange and its applications. The authors also give a brief overview of these applications as well as review current experimental data on the subject.

Download or read book The Regulation of the Dental Profession by the General Dental Council The John McLean Archive A Living History of Dentistry Witness Seminar 1 written by Nairn Wilson and published by Lulu.com. This book was released on 2013-12-05 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This transcript of a witness seminar, one of a series of five, provides an intriguing and instructional collection of memoires and insights from senior members of the dental profession and others, especially since the inception of the NHS. Such seminars capture the knowledge of 'witnesses' to the events discussed. These seminars and associated activities form part of a history of dentistry made possible by a significant donation from the eponymous sponsor of the John McLean Archive of Living Dental History. Dr John McLean was a unique icon of British dentistry. He was a leader of the profession, holding many prestigious positions, including President of the BDA, and an expert on dental materials, operative dentistry and prosthodontics. He authored over 100 papers for peer-reviewed journals. The seminars are part of a fitting memorial to a great man and provide information that cannot easily be obtained in books and clinical and research journals.

Download or read book The Changes in Dentistry Since 1948 written by Nairn Wilson and published by Lulu.com. This book was released on 2014-03-27 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the transcript of a witness seminar held at the British Dental Association in October 2011. It records the major events and changes within the practice of Dentistry within the United Kingdom from the start of the National Health Service to the present time. The discussion included a wide range of major participants in the politics, management and practice of Dentistry during this time. It is one of a series of seminars held as part of the John McLean History of Dentistry Archive organised between the British Dental Association and the History of Dentistry Unit at King's College London to study the profession, especially since the time of the establishment of the National Health Service in 1948.

Download or read book The History and Impact of Development in Dental Biomaterials Over the Last 60 Years written by Nairn Wilson and published by Lulu.com. This book was released on 2014-03-27 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the transcript of a witness seminar held at the British Dental Association in June 2012. It records the changes and impact on the practice of Dentistry made by the changes and development in biomaterial upon the practice of Dentistry within the United Kingdom from the start of the National Health Service to the present time. The discussion included a wide range of major participants in the politics, management and practice of Dentistry during this time. It is one of a series of seminars held as part of the John McLean History of Dentistry Archive organised between the British Dental Association and the History of Dentistry Unit at King's College London to study the profession, especially since the time of the establishment of the National Health Service in 1948.

Download or read book The Changing Role of Dental Care Professionals written by Nairn Wilson and published by Lulu.com. This book was released on 2014-03-27 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the transcript of a witness seminar held at the British Dental Association in March 2012. It records the changes in the roles of Dental Professionals within the United Kingdom from the start of the National Health Service to the present time. The discussion included a wide range of major participants in the politics, management and practice of Dentistry during this time. It is one of a series of seminars held as part of the John McLean History of Dentistry Archive organised between the British Dental Association and the History of Dentistry Unit at King's College London to study the profession, especially since the time of the establishment of the National Health Service in 1948.

Download or read book The Dental Press The John McLean Archive A Living History of Dentistry Witness Seminar 5 written by Nairn Wilson and published by Lulu.com. This book was released on 2014-03-27 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the transcript of a witness seminar held at the British Dental Association in September 2012. It records the contribution made by the media and Dental Press to the practice of Dentistry within the United Kingdom from the start of the National Health Service to the present time. The discussion included a range of major participants in the politics and management of Dentistry during this time including some editors of dental periodicals. It is one of a series of seminars held as part of the John McLean History of Dentistry Archive organised between the British Dental Association and the History of Dentistry Unit at King's College London to study the profession, especially since the time of the establishment of the National Health Service in 1948.

Download or read book Bioinspired Structures and Design written by Wole Soboyejo and published by Cambridge University Press. This book was released on 2020-09-17 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human cortical bone as a structural material : Hierarchical design and biological degradation / Robert Ritchie and Elizabeth A. Zimmermann -- Bio-inspiration from nacre / Nima Rahbar and Sina Askarinejad -- Bio-inspiration from bamboo / Ting Tan and Wole Soboyejo.

Download or read book Phillips Science of Dental Materials eBook written by Kenneth J. Anusavice and published by Elsevier Health Sciences. This book was released on 2003-06-30 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 11th edition of this leading reference is an outstanding, scientifically based source of information in the field of dental materials science. It presents up-to-date information on materials that are used in the dental office and laboratory every day, emphasizing practical, clinical use, as well as the physical, chemical, and biological properties of materials. Extensive new clinical photographs in this edition illustrate the topics, and color plates are integrated close to related concepts as they're discussed in each chapter. A new glossary of key terms found at the beginning of every chapter defines terms in the appropriate context of the chapter's discussion. Also in this edition, critical thinking questions throughout the book stimulate the readers' curiosity on specific topics, test their existing knowledge, and heighten their awareness of important or controversial subjects. Content outlines at the beginning of each chapter provide a quick reference for specific topics. The roles played by key organizations in ensuring the safety and efficacy of dental materials and devices are described - such as the American Dental Association, the U.S. Food and Drug Administration, the International Organization for Standardization, and the Fédération Dentaire Internationale. Up-to-date Selected Readings are presented at the end of each chapter to direct readers to supplemental literature on each topic. Numerous boxes and tables throughout summarize and illustrate key concepts and compare characteristics and properties of various dental materials. Distinguished contributors lend their credibility and experience to the text. Content has been completely updated to include information on the most current dental materials available. Glossaries at the beginning of each chapter define key terms used within the context of that chapter. Revised artwork gives this edition a fresh look, with high-quality illustrations and clinical photos to aid in the visualization of materials and procedures described. Reorganization and consolidation of chapters into four major book parts presents the material in a more efficient way: Part I describes the principles of materials science that control the performance of dental materials in dental laboratories, research laboratories, student dental clinics, public health clinics, and private practice clinics. Part II focuses on impression materials, gypsum products, dental waxes, casting investments and procedures, and finishing and polishing abrasives and procedures. Part III provides an updated scientific and applied description of the composition, manipulation principles, properties, and clinical performance of bonded restorations, restorative resins, dental cements, dental amalgams, and direct-filling golds. Part IV presents a basic and applied description of materials that are processed in a laboratory or dental clinic. Critical thinking questions appear in every chapter to stimulate thinking and classroom discussion. The overall design has been improved to provide a more visually appealing format.

Download or read book Phillips Science of Dental Materials E Book written by Kenneth J. Anusavice and published by Elsevier Health Sciences. This book was released on 2014-03-14 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the most up-to-date information on materials used in the dental office and laboratory today. Emphasizing practical, clinical use, as well as the physical, chemical, and biological properties of materials, this leading reference helps you stay current in this very important area of dentistry. This new full-color edition also features an extensive collection of new clinical photographs to better illustrate the topics and concepts discussed in each chapter. Organization of chapters and content into four parts (General Classes and Properties of Dental Materials; Auxiliary Dental Materials; Direct Restorative Materials; and Indirect Restorative Materials) presents the material in a logical and effective way for better comprehension and readability. Balance between materials science and manipulation bridges the gap of knowledge between dentists and lab technicians. Major emphasis on biocompatibility serves as a useful guide for clinicians and educators on material safety. Distinguished contributor pool lends credibility and experience to each topic discussed. Critical thinking questions appearing in boxes throughout each chapter stimulate thinking and encourage classroom discussion of key concepts and principles. Key terms presented at the beginning of each chapter helps familiarize readers with key terms so you may better comprehend text material. NEW! Full color illustrations and line art throughout the book make text material more clear and vivid. NEW! Chapter on Emerging Technologies keeps you up to date on the latest materials in use. NEW! Larger trim size allows the text to have fewer pages and makes the content easier to read.

Download or read book Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1982 with total page 1174 pages. Available in PDF, EPUB and Kindle. Book excerpt: First multi-year cumulation covers six years: 1965-70.

Download or read book National Library of Medicine Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1982 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phillips Science of Dental Materials E Book written by Chiayi Shen and published by Elsevier Health Sciences. This book was released on 2021-05-13 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keep current with the evolving technology of dental materials! Phillips’ Science of Dental Materials, 13th Edition provides comprehensive, up-to-date information on the materials used in cosmetic and restorative procedures in dentistry. It introduces the physical and chemical properties that are related to selection and use of dental biomaterials, including their composition, mechanical properties, manipulative variables, and the performance of dental restorations and prostheses. This edition adds three new chapters and hundreds of new full-color photographs. Written by dental scientists Chiayi Shen and H. Ralph Rawls along with prosthodontist Josephine Esquivel-Upshaw, this leading text/reference helps dentists select the right materials for oral procedures and helps dental labs ensure high-quality restorations. 500 full-color photos and illustrations show concepts, dental instruments, and restorations. Key terms are defined at the beginning of each chapter, covering terminology related to dental biomaterials and science. Critical thinking questions stimulate thinking and emphasize important concepts and principles. Logical, five-part organization of chapters makes the content easier to read and understand, with units on General Classes and Properties of Dental Materials, Direct Restorative Materials, Indirect Restorative Materials, Fabrication of Prostheses, and Assessing Dental Restorations. Balance between materials science and manipulation bridges the gap of knowledge between dentists and lab technicians. Major emphasis on biocompatibility serves as a useful guide to the principles and clinical implications of restorative materials safety. Diverse and respected pool of contributors lends credibility and experience to each dental science topic. NEW! Three new chapters are added: Digital Technology in Dentistry, In Vitro Research of Dental Materials, and Clinical Research of Restorations.

Download or read book Processing And Fabrication Of Advanced Materials Viii written by Freddy Yin Chiang Boey and published by World Scientific. This book was released on 2001-01-19 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the technical papers presented at the international symposium entitled “Processing and Fabrication of Advanced Materials VIII”, held in Singapore in 1999. This was the eighth in a series of symposia bringing together engineers and researchers from industry, academia and national laboratories, working on aspects related to the processing, fabrication and characterization of advanced materials, to present and discuss their latest findings. The proceedings also contain technical papers presented at two special symposia on biomaterials and magnesium technology.