Download or read book Tribological Research and Design for Engineering Systems written by D. Dowson and published by Elsevier. This book was released on 2003-07-17 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers represent the proceedings from the 29th Leeds-Lyon Symposium on Tribology, 'Tribological Research and Design for Engineering Systems' which was held in September 2002. Over 130 delegates from 18 countries attended the symposium, and the extensive discussions generated over 150 written questions and responses, which are documented at the end of this proceedings volume.There have been many advances in the field of tribology in recent years, with progress being made in the engineering and interaction of surfaces; micro and nano-tribology; elastohydrodynamics; surface films; surface texture; tribochemistry; wear and life prediction; with both experimental and theoretical contributions. These advances were reviewed, and the impact of this understanding on the fundamentals upon total engineering activity in design, manufacture and machine operation were considered.Readership:Scientists and researchers in the field of tribology.

Download or read book Lubrication at the Frontier The Role of the Interface and Surface Layers in the Thin Film and Boundary Regime written by M. Priest and published by Elsevier. This book was released on 1999-07-01 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 25th Leeds-Lyon Symposium on Tribology was held at the Institut des Sciences Appliquées de Lyon, from 8-11th September, 1998. Its central theme was, "Lubrication at the frontier: the role of the interface and surface layers in the thin film and boundary regime". This topic was chosen because it represents an important evolution of the research field.The Symposium opened with a keynote address entitled "Role of surface-anchored polymer chains in polymer friction" which described the processes taking place at the interface between "solid" and "liquid". The keynote address was followed by two invited lectures. Firstly, "Fuel efficient engine oils, additive interactions, boundary friction and wear" presented the industrial point of view on lubricant formulation and engine testing and its evolution. The second lecture was entitled "For establishment of a new EHL theory" and stressed the need to extend the current EHL theory.Beginning in 1974, The Leeds-Lyon Symposia have now covered a wide range of topics. The essential aim each year is to select a topic of current interest to tribologists and to contribute to further the advance of knowledge in selected fields.

Download or read book Encyclopedia of Tribology written by Q. Jane Wang and published by Springer. This book was released on 2013-09-26 with total page 4139 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY – the study of friction, wear and lubrication – impacts almost every aspect of our daily lives. The Springer Encyclopedia of Tribology is an authoritative and comprehensive reference covering all major aspects of the science and engineering of tribology that are relevant to researchers across all engineering industries and related scientific disciplines. This is the first major reference that brings together the science, engineering and technological aspects of tribology of this breadth and scope in a single work. Developed and written by leading experts in the field, the Springer Encyclopedia of Tribology covers the fundamentals as well as advanced applications across material types, different length and time scales, and encompassing various engineering applications and technologies. Exciting new areas such as nanotribology, tribochemistry and biotribology have also been included. As a six-volume set, the Springer Encyclopedia of Tribology comprises 1630 entries written by authoritative experts in each subject area, under the guidance of an international panel of key researchers from academia, national laboratories and industry. With alphabetically-arranged entries, concept diagrams and cross-linking features, this comprehensive work provides easy access to essential information for both researchers and practicing engineers in the fields of engineering (aerospace, automotive, biomedical, chemical, electrical, and mechanical) as well as materials science, physics, and chemistry.

Download or read book The Third Body Concept Interpretation of Tribological Phenomena written by C.M. Taylor and published by Elsevier. This book was released on 1996-09-11 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central theme of this book, The Third Body Concept: Interpretation of Tribological Phenomena, was chosen to honour the work of Professor Maurice Godet. The aim of this and previous conferences in the series is to select a topic of current interest to tribologists in order to further advance knowledge in selected fields. Presented by leading scientists from 23 countries, these proceedings provide an up-to-date review of developments in this field..

Download or read book Tribological Design of Machine Elements written by D. Berthe and published by Elsevier. This book was released on 1989-10-03 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: On previous occasions each Symposium has focused attention on a current and significant research topic, usually reflecting the interests of the Leeds or Lyon research groups, however this time the main focus was on the vitally important subject of technology transfer, providing the 154 delegates from 21 countries with the rare opportunity to discuss the impact of their studies on machine design.

Download or read book Tribocorrosion of Passive Metals and Coatings written by D Landolt and published by Elsevier. This book was released on 2011-10-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems. - Comprehensively reviews current research on the tribocorrosion of passive metals and coatings, with particular reference to the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems - Chapters discuss tribocorrosion mechanisms under fretting, sliding and erosion conditions before focussing on methods for measuring and preventing tribocorrosion - Includes a comprehensive selection of tribocorrosion problems in engineering and medicine, such as the tribocorrosion of medical implants, and tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits and elevated-temperature metal working

Download or read book Thinning Films and Tribological Interfaces written by D. Dowson and published by Elsevier. This book was released on 2000-09-01 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of fully peer-reviewed papers were presented at the 26th Leeds-Lyon Tribology Symposium which was held in Leeds, UK, 14-17 September, 1999. The Leeds-Lyon Symposia on Tribology were launched in 1974, and the large number of references to original work published in the Proceedings over many years confirms the quality of the published papers. It also indicates that the volumes have served their purpose and become a recognised feature of the tribological literature. This year's title is 'Thinning Films and Tribological Interfaces', and the papers cover practical applications of tribological solutions in a wide range of situations. The evolution of a full peer review process has been evident for a number of years. An important feature of the Leeds-Lyon Symposia is the presentation of current research findings. This remains an essential feature of the meetings, but for the 26th Symposium authors were invited to submit their papers for review a few weeks in advance of the Symposium. This provided an opportunity to discuss recommendations for modifications with the authors.

Download or read book New Tribological Ways written by Taher Ghrib and published by BoD – Books on Demand. This book was released on 2011-04-26 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to recapitulate old information's available and brings new information's that are with the fashion research on an atomic and nanometric scale in various fields by introducing several mathematical models to measure some parameters characterizing metals like the hydrodynamic elasticity coefficient, hardness, lubricant viscosity, viscosity coefficient, tensile strength .... It uses new measurement techniques very developed and nondestructive. Its principal distinctions of the other books, that it brings practical manners to model and to optimize the cutting process using various parameters and different techniques, namely, using water of high-velocity stream, tool with different form and radius, the cutting temperature effect, that can be measured with sufficient accuracy not only at a research lab and also with a theoretical forecast. This book aspire to minimize and eliminate the losses resulting from surfaces friction and wear which leads to a greater machining efficiency and to a better execution, fewer breakdowns and a significant saving. A great part is devoted to lubrication, of which the goal is to find the famous techniques using solid and liquid lubricant films applied for giving super low friction coefficients and improving the lubricant properties on surfaces.

Download or read book Microstructure and Wear of Materials written by K.-H. Zum Gahr and published by Elsevier. This book was released on 1987-03-01 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book will be useful not only to practising engineers and scientists, but also to advanced students interested in wear. It reviews our current understanding of the influence of microstructural elements and physical properties of materials (metals, polymers, ceramics and composites) on wear.The introductory chapters describe the relation between microstructure and mechanical properties of materials, surfaces in contact and the classification of wear processes. The following chapters are concerned with wear modes of great practical interest such as grooving wear, sliding wear, rolling-sliding wear and erosive wear. Our present understanding of abrasion, adhesion, surface fatigue and tribochemical reactions as the relevant wear mechanisms is discussed, and new wear models are presented. In addition to extensive experimental results, sketches have been widely used for clarifying the physical events.

Download or read book The Adult Hip written by Aaron G. Rosenberg and published by Lippincott Williams & Wilkins. This book was released on 2015-10-13 with total page 3426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set contains comprehensive coverage of management of disorders of the adult hip. It includes all arthroscopic and open procedures as well as extensive coverage of equipment and prostheses.

Download or read book Friction Science and Technology written by Peter J. Blau and published by CRC Press. This book was released on 1995-10-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers a multidisciplinary approach to static and kinetic friction, both with and without lubrication, and reviews the conventional and novel methods used to measure friction. The elementary problems found in the mechanics of sliding objects and machine components, and the effects of contact pressure, sliding speed, surface roughness, humidity and temperature on friction, are discussed.;College or university bookstores may order five or more copies at a special student price, available upon request.

Download or read book Bio tribocorrosion in biomaterials and medical implants written by Y. Yan and published by Elsevier Inc. Chapters. This book was released on 2013-09-30 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: Total joint replacement (TJR), or joint arthroplasty, is a widely used surgical procedure in which the entire joint is removed and replaced with a prosthetic joint. The most common types of TJR are total hip replacement (THR) and total knee replacement (TKR). The improvement and development of safer, longer lasting and better functioning implants are essential. Recent reports of potential problems caused by ion release in metal-on-metal (MoM) TJRs resulting in the formation of pseudo-tumours therefore need to be properly investigated. This chapter provides an overview of the evolution of TJR, followed by a review of the issues and the science around ion release. The potential corrosion issues and bio-tribocorrosion processes which prevail in TJRs, including orthopaedic implant materials, load-bearing joint replacement materials tribocorrosion, and protein adsorption, are also discussed.

Download or read book Fluid Film Lubrication Osborne Reynolds Centenary written by D. Berthe and published by Elsevier. This book was released on 1987-10-01 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thirteenth Leeds-Lyon Tribology Symposium was devoted to the topic of Fluid Film Lubrication in celebration of the centenary of the publication of the classical paper by Professor Osborne Reynolds in which he identified the mechanism of hydrodynamic lubrication.These proceedings contain more than seventy papers, written by authors from all over the world, covering the entire spectrum of fluid film lubrication. Of particular interest is the detailed consideration of a wide range of machine elements - bearings, seals, cams, rolling elements, as well as the in-depth, state-of-the-art, analytical contributions.

Download or read book Lubricants and Lubrication written by G. Dalmaz and published by Elsevier. This book was released on 1995-10-05 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings review progress in the development of lubricants and in the understanding of the phenomena of lubrication.The contents include papers on the impact of automotive technology and environmental factors upon lubricant requirements, elasto-hydrodynamic lubrication, boundary lubrication, machine elements, bio-tribology, metal forming, rheology, lubricated wear and very thin film (nano metre) lubrication. Presented by leading scientists from 22 different countries, these proceedings provide an up-to-date review of developments in this field.

Download or read book Progress in Lubrication and Nano and Biotribology written by Catalin I. Pruncu and published by CRC Press. This book was released on 2021-11-23 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is a multidisciplinary science that encompasses mechanical engineering, materials science, surface engineering, lubricants, and additives chemistry with tremendous applications. Progress in Lubrication and Nano- and Biotribology discusses the latest in lubrication engineering and nano- and biotribology. This book: Discusses green tribology and snakeskin tribology Explains biogreases and nanolubricant additives Explores applications in aerospace, additively manufactured parts, and severe environments Written for researchers and advanced students, this book encompasses a wide-ranging view of the latest in nano- and biotribology for a variety of cross-disciplinary applications.

Download or read book Elastohydrodynamics 96 written by C. Taylor and published by Elsevier. This book was released on 1997-07-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the latest issue of a collection of Proceedings each dealing with a different topic in Tribology. This volume contains the Proceedings from the 23rd Leeds-Lyon Symposium which addressed the topic of Elastohydrodynamics and was attended by many international experts in the field.The Keynote Address was presented by Professor Stathis Ioannides on the subject of "Tribology in Rolling Element Bearings" and was followed by fifteen other sessions covering a wide variety of general areas from "Experimental" to "Lubricant Properties". In addition, nine other invited technical papers were presented to support the sessions.

Download or read book Coatings Tribology written by Kenneth Holmberg and published by Elsevier. This book was released on 2009-03-18 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface coating field is a rapidly developing area of science and technology that offers new methods and techniques to control friction and wear. New coating types are continually being developed and the potential applications in different industrial fields are ever growing, ranging from machine components and consumer products to medical instruments and prostheses. This book provides an extensive review of the latest technology in the field, addressing techniques such as physical and chemical vapour deposition, the tribological properties of coatings, and coating characterization and performance evaluation techniques. Eleven different cases are examined in close detail to demonstrate the improvement of tribological properties and a guide to selecting coatings is also provided. This second edition is still the only monograph in the field to give a holistic view of the subject and presents all aspects, including test and performance data as well as insights into mechanisms and interactions, thus providing the level of understanding vital for the practical application of coatings. * An extensive review of the latest developments in the field of surface coatings* Presents both theory and practical applications* Includes a guide for selecting coatings