Download or read book The Route to Patient Safety in Robotic Surgery written by Lorenzo Grespan and published by Springer. This book was released on 2018-12-13 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of a new technology in a consolidated field has the potential to disrupt usual practices and create a fertile ground for errors. An example is robotic surgery that is now used in most surgical specialties, pushed by technology developers and enthusiastic surgeons. To analyze the potential impact of robotic surgery on patient safety, a consortium of major European Universities started the project SAFROS whose findings are summarized and further elaborated in the three parts of this book. Part one describes safety in complex systems such as surgery, how this may disrupt the traditional surgical workflow, how safety can be monitored, and the research questions that must be posed. Part two of the book describes the main findings of this research, by identifying the risks of robotic surgery and by describing where its ancillary technologies may fail. This part addresses features and evaluation of anatomic imaging and modeling, actions in the operating room, robot monitoring and control, operator interface, and surgical training. Part three of the book draws the conclusions and offers suggestions on how to limit the risks of medical errors. One possible approach is to use automation to monitor and execute parts of an intervention, thus suggesting that robotics and artificial intelligence will be major elements of the operating room of the future.

Download or read book Handbook of Robotic and Image Guided Surgery written by Mohammad Hossein Abedin Nasab and published by Elsevier. This book was released on 2019-09-25 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. - A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field - A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries - Chapters are contributed by worldwide experts from both engineering and surgical backgrounds

Download or read book Safety Security and Reliability of Robotic Systems written by Brij B. Gupta and published by CRC Press. This book was released on 2020-12-30 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing demand of robots for industrial and domestic use, it becomes indispensable to ensure their safety, security, and reliability. Safety, Security and Reliability of Robotic Systems: Algorithms, Applications, and Technologies provides a broad and comprehensive coverage of the evolution of robotic systems, as well as industrial statistics and future forecasts. First, it analyzes the safety-related parameters of these systems. Then, it covers security attacks and related countermeasures, and how to establish reliability in these systems. The later sections of the book then discuss various applications of these systems in modern industrial and domestic settings. By the end of this book, you will be familiarized with the theoretical frameworks, algorithms, applications, technologies, and empirical research findings on the safety, security, and reliability of robotic systems, while the book’s modular structure and comprehensive material will keep you interested and involved throughout. This book is an essential resource for students, professionals, and entrepreneurs who wish to understand the safe, secure, and reliable use of robotics in real-world applications. It is edited by two specialists in the field, with chapter contributions from an array of experts on robotics systems and applications.

Download or read book Robotic Urologic Surgery written by Vipul R. Patel and published by Springer Science & Business Media. This book was released on 2011-08-31 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic Urologic Surgery, Second Edition is an updated and revised technical manual focusing on the various robotic approaches to robotic urologic surgical procedures. This book provides instructions on how to develop a successful robotics program, learn the various techniques, and improve outcomes. It also aids the reader with helpful hints to avoid pitfalls. Robotic Urologic Surgery, Second Edition includes up-to-date contributions from leading robotic urologic surgeons from around the world. The detailed body of data which this book provides is supported by schematic diagrams and anatomic photographs to illustrate the concept being discussed. Robotic Urologic Surgery, Second Edition is an essential guide for all urologists as a reference to establish a robotics program, refine their surgical technique, and provide information to patients.

Download or read book Surgical Robotics written by Jacob Rosen and published by Springer Science & Business Media. This book was released on 2011-01-15 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surgical robotics is a rapidly evolving field. With roots in academic research, surgical robotic systems are now clinically used across a wide spectrum of surgical procedures. Surgical Robotics: Systems Applications and Visions provides a comprehensive view of the field both from the research and clinical perspectives. This volume takes a look at surgical robotics from four different perspectives, addressing vision, systems, engineering development and clinical applications of these technologies. The book also: -Discusses specific surgical applications of robotics that have already been deployed in operating rooms -Covers specific engineering breakthroughs that have occurred in surgical robotics -Details surgical robotic applications in specific disciplines of surgery including orthopedics, urology, cardiac surgery, neurosurgery, ophthalmology, pediatric surgery and general surgery Surgical Robotics: Systems Applications and Visions is an ideal volume for researchers and engineers working in biomedical engineering.

Download or read book Robotic Surgery and Nursing written by Gongxian Wang and published by Springer Nature. This book was released on 2021-05-04 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in readable format and rich with clinical cases, this book systematically introduces surgical nursing during robotic surgery. The first part introduces the history of robotic surgery, operating room management, quality control of robotic surgical nursing, management of safety, infection, and anaesthesia. The second part introduces key points of nursing during robotic surgery in urology, general surgery, gynaecology, heart, chest and otorhinolaryngology. It will be a helpful reference for practitioners those in the process of implanting or about to implant robotic surgery.

Download or read book Robotics in Plastic and Reconstructive Surgery written by Jesse C. Selber and published by Springer Nature. This book was released on 2021-07-30 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the current state of robotics in plastic and reconstructive surgery. It examines existing clinical applications, emerging and future applications and evolving technological platforms. Concise yet comprehensive, this book is organized into four sections. It begins with an introduction to robotic microsurgical training and robotic skills assessment, including crowd-sourced evaluation in surgery. Section two explores a variety of robotic clinical application, including robotic breast reconstruction, robotic mastectomy, robotic cleft palate surgery and robotic microsurgery in a urologic private practice. Following this, section three addresses the opportunities and challenges an interested surgeon might face when considering incorporating this technology into their practice. To close, the final section discusses new microsurgical robotic platforms and the potential directions this technology may take in the future. Supplemented with high quality videos and images, Robotics in Plastic and Reconstructive Surgery is an invaluable resource for both plastic surgeons and multi-specialty micro-surgeons.

Download or read book Transoral Robotic Surgery TORS written by Gregory S. Weinstein and published by Plural Publishing. This book was released on 2011-09-05 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Essential Clinical Anesthesia written by Charles Vacanti and published by Cambridge University Press. This book was released on 2011-07-11 with total page 1191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The clinical practice of anesthesia has undergone many advances in the past few years, making this the perfect time for a new state-of-the-art anesthesia textbook for practitioners and trainees. The goal of this book is to provide a modern, clinically focused textbook giving rapid access to comprehensive, succinct knowledge from experts in the field. All clinical topics of relevance to anesthesiology are organized into 29 sections consisting of more than 180 chapters. The print version contains 166 chapters that cover all of the essential clinical topics, while an additional 17 chapters on subjects of interest to the more advanced practitioner can be freely accessed at www.cambridge.org/vacanti. Newer techniques such as ultrasound nerve blocks, robotic surgery and transesophageal echocardiography are included, and numerous illustrations and tables assist the reader in rapidly assimilating key information. This authoritative text is edited by distinguished Harvard Medical School faculty, with contributors from many of the leading academic anesthesiology departments in the United States and an introduction from Dr S. R. Mallampati. This book is your essential companion when preparing for board review and recertification exams and in your daily clinical practice.

Download or read book WHO Guidelines for Safe Surgery 2009 written by World Health Organization (Genève). World Alliance for Patient Safety and published by . This book was released on 2009 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Confronted with worldwide evidence of substantial public health harm due to inadequate patient safety, the World Health Assembly (WHA) in 2002 adopted a resolution (WHA55.18) urging countries to strengthen the safety of health care and monitoring systems. The resolution also requested that WHO take a lead in setting global norms and standards and supporting country efforts in preparing patient safety policies and practices. In May 2004, the WHA approved the creation of an international alliance to improve patient safety globally; WHO Patient Safety was launched the following October. For the first time, heads of agencies, policy-makers and patient groups from around the world came together to advance attainment of the goal of "First, do no harm" and to reduce the adverse consequences of unsafe health care. The purpose of WHO Patient Safety is to facilitate patient safety policy and practice. It is concentrating its actions on focused safety campaigns called Global Patient Safety Challenges, coordinating Patients for Patient Safety, developing a standard taxonomy, designing tools for research policy and assessment, identifying solutions for patient safety, and developing reporting and learning initiatives aimed at producing 'best practice' guidelines. Together these efforts could save millions of lives by improving basic health care and halting the diversion of resources from other productive uses. The Global Patient Safety Challenge, brings together the expertise of specialists to improve the safety of care. The area chosen for the first Challenge in 2005-2006, was infection associated with health care. This campaign established simple, clear standards for hand hygiene, an educational campaign and WHO's first Guidelines on Hand Hygiene in Health Care. The problem area selected for the second Global Patient Safety Challenge, in 2007-2008, was the safety of surgical care. Preparation of these Guidelines for Safe Surgery followed the steps recommended by WHO. The groundwork for the project began in autumn 2006 and included an international consultation meeting held in January 2007 attended by experts from around the world. Following this meeting, expert working groups were created to systematically review the available scientific evidence, to write the guidelines document and to facilitate discussion among the working group members in order to formulate the recommendations. A steering group consisting of the Programme Lead, project team members and the chairs of the four working groups, signed off on the content and recommendations in the guidelines document. Nearly 100 international experts contributed to the document (see end). The guidelines were pilot tested in each of the six WHO regions--an essential part of the Challenge--to obtain local information on the resources required to comply with the recommendations and information on the feasibility, validity, reliability and cost-effectiveness of the interventions.

Download or read book Computer integrated Surgery written by Russell H. Taylor and published by MIT Press. This book was released on 1996 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.

Download or read book Core Topics in Airway Management written by Ian Calder and published by Cambridge University Press. This book was released on 2005-01-06 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an easy-to-read introduction to this important topic that will be of value to a wide spectrum of healthcare professionals including anaesthetists, intensivists, ODPs, theatre and recovery nurses. Concise but comprehensive chapters from experts in the field cover everything from basic anatomy, physiology and applied physics, through the various methods of maintaining the airway under anaesthesia (supraglottic devices, tracheal intubation, tubes/cuffs, endobronchial and double-lumen tubes) to the problem airway (obstruction by infection, tumour or a foreign body, ENT and maxillo-facial surgery, aspiration, obstetrics, trauma, cervical spine disease, intensive care, the 'lost' airway, extubation and recovery), the paediatric airway, disinfection and cleaning of equipment and finally morbidity, mortality and medico-legal issues. 'Real' clinical scenarios, with patient management questions and model answers, are included throughout, to bring to life some of the key problems encountered in day-to-day practice and enhance the book's utility as a teaching and self-learning tool.

Download or read book Impact of AI and Robotics on the Medical Tourism Industry written by Hassan, Viana and published by IGI Global. This book was released on 2024-03-18 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the ancient world, health seekers traversed vast distances to pursue well-being. Fast forward to the 21st century, and the concept of medical tourism has evolved into a global industry worth billions of dollars. The burgeoning demand for quality healthcare has pushed traditional boundaries, necessitating a more sophisticated and interconnected healthcare ecosystem. Integrating Artificial Intelligence (AI) into medical practices empowers individuals to actively manage their health while providing healthcare practitioners with invaluable insights for tailored patient care. Impact of AI and Robotics on the Medical Tourism Industry delves into the transformative impact of AI and robotics on this dynamic sector. It explores how AI can encourage and assist patients in their health plans while augmenting healthcare practitioners' capabilities to utilize specific patient data to offer unique guidance. It dissects real-world examples, such as Cleveland Clinic Abu Dhabi's integration of robotic surgery, showcasing how these technologies revolutionize traditional medical practices.

Download or read book Internet of Things written by Nitin Goyal and published by CRC Press. This book was released on 2022-02-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference text discusses intelligent robotic and drone technology with embedded Internet of Things (IoT) for smart applications. The text discusses future directions of optimization methods with various engineering and science fundamentals used in robotics and drone-based applications. Its emphasis is on covering deep learning and similar models of neural network-based learning techniques employed in solving optimization problems of different engineering and science applications. It covers important topics including sensors and actuators in the internet of things (IoT), internet-of-robotics-things (IoRT), IoT in agriculture and food processing, routing challenges in flying Ad-hoc networks, and smart cities. The book will serve as a useful text for graduate students and professionals in the fields of electrical engineering, electronics engineering, computer science, and mechanical engineering.

Download or read book Surgical Patient Care written by Juan A. Sanchez and published by Springer. This book was released on 2017-05-29 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses exclusively on the surgical patient and on the perioperative environment with its unique socio-technical and cultural issues. It covers preoperative, intraoperative, and postoperative processes and decision making and explores both sharp-end and latent factors contributing to harm and poor quality outcomes. It is intended to be a resource for all healthcare practitioners that interact with the surgical patient. This book provides a framework for understanding and addressing many of the organizational, technical, and cultural aspects of care to one of the most vulnerable patients in the system, the surgical patient. The first section presents foundational principles of safety science and related social science. The second exposes barriers to achieving optimal surgical outcomes and details the various errors and events that occur in the perioperative environment. The third section contains prescriptive and proactive tools and ways to eliminate errors and harm. The final section focuses on developing continuous quality improvement programs with an emphasis on safety and reliability. Surgical Patient Care: Improving Safety, Quality and Value targets an international audience which includes all hospital, ambulatory and clinic-based operating room personnel as well as healthcare administrators and managers, directors of risk management and patient safety, health services researchers, and individuals in higher education in the health professions. It is intended to provide both fundamental knowledge and practical information for those at the front line of patient care. The increasing interest in patient safety worldwide makes this a timely global topic. As such, the content is written for an international audience and contains materials from leading international authors who have implemented many successful programs.

Download or read book Corporate Sustainability in Times of Virus Crises written by Kıymet Tunca Çalıyurt and published by Springer Nature. This book was released on 2023-05-05 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses the effect of biological risk on business and management by considering case studies from Malaysia, Lebanon, and G20 countries during the COVID-19 pandemic. Covering a wide range of topics, such as effects of virus risk on corporate sustainability, COVID-19 and CSR activities, governance practices and regulations for derivative products in emerging markets, risk management during a pandemic, and AI applications in the health sector, this book assists top management in redesigning business models and organisational management in a post-pandemic world and in becoming better equipped to tackle future biological risks or pandemic events.

Download or read book Research Handbook on Public Management and COVID 19 written by Helen Dickinson and published by Edward Elgar Publishing. This book was released on 2024-02-12 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the extensive global impact of COVID-19, this forward-looking Research Handbook examines the pandemic from a public management perspective, exploring the roles and responses of public managers and considering how public organisations will be reshaped in the future.