Download or read book The Role of Interparticle Heterogeneities in the Selenization Pathway of Cu Zn Sn S Nanoparticle Thin Films written by and published by . This book was released on 2015 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time energy dispersive x-ray diffraction (EDXRD) analysis has been utilized to observe the selenization of Cu-Zn-Sn-S nanoparticle films coated from three nanoparticle populations: Cu- and Sn-rich particles roughly 5 nm in size, Zn-rich nanoparticles ranging from 10 to 20 nm in diameter, and a mixture of both types of nanoparticles (roughly 1:1 by mass), which corresponds to a synthesis recipe yielding CZTSSe solar cells with reported total-area efficiencies as high as 7.9%. The EDXRD studies presented herein show that the formation of copper selenide intermediates during the selenization of mixed-particle films can be primarily attributed to the small, Cu- and Sn-rich particles. Moreover, the formation of these copper selenide phases represents the first stage of the CZTSSe grain growth mechanism. The large, Zn-rich particles subsequently contribute their composition to form micrometer-sized CZTSSe grains. In conclusion, these findings enable further development of a previously proposed selenization pathway to account for the roles of interparticle heterogeneities, which in turn provides a valuable guide for future optimization of processes to synthesize high quality CZTSSe absorber layers.

Download or read book Solar Energy Research Institute for India and the United States SERIIUS written by David Ginley and published by Springer Nature. This book was released on 2020-02-26 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development, functioning, and results of a successful binational program to promote significant scientific advances in Earth-abundant photovoltaics (PV) and concentrated solar power (CSP), advanced process/manufacturing technologies, multiscale modeling and reliability testing, and analysis of integrated solar energy systems. SERIIUS is a consortium between India and the United States dedicated to developing new solar technologies and assessing their potential impact in the two countries. The consortium consists of nearly 50 institutions including academia, national laboratories, and industry, with the goal of developing significant new technologies in all areas of solar deployment. In addition, the program focused on workforce development through graduate students, post-doctoral students, and an international exchange program. Particular emphasis was placed on the following efforts: Creating disruptive technologies in PV and CSP through high-impact fundamental and applied research and development (R&D). Identifying and quantifying the critical technical, economic, and policy issues for solar energy development and deployment in India. Overcoming barriers to technology transfer by teaming research institutions and industry in an effective project structure. Building a new platform for binational collaboration using a formalized R&D project structure, along with effective management, coordination, and decision processes. Creating a sustainable network and workforce development program from which to build large collaborations and fostering a collaborative culture and outreach programs. This includes using existing and new methodologies for collaboration based on advanced electronic and web-based communication to facilitate functional international teams. The book summarizes the general lessons learned from these experiences.

Download or read book Development of in situ methods for process monitoring and control and characterization of Cu Zn Sn S based thin films written by Van Duren, Stephan and published by Universitätsverlag der TU Berlin. This book was released on 2019-06-03 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, kesterite Cu2ZnSnS4 (CZTS) has become an interesting alternative to copper indium gallium (di)selenide (CIGS) due to its non-toxic and earth abundant constituents. A variety of methods is being used to fabricate kesterite thin films, such as coevaporation, sputtering, electrodeposition, spray pyrolysis and others. Most of them include an annealing step to stimulate elemental mixing and interdiffusion. Although conversion efficiencies of kesterite solar cells have increased among different research groups, the record value of 12.6% set by IBM in 2014 has not been broken yet. Therefore, experimental and theoretical studies are needed to predict the effect of the secondary phases and detrimental defects on the electronical properties of the CZTS based solar devices. The work presented here studies non-destructive techniques for in situ process control and monitoring. With the aim to detect phases and phase transitions to optimize crucial processing steps such as pre-annealing of metal precursors, high temperature annealing and vacuum deposition of Cu-Sn-Zn-S based thin films. The research consists of three parts in which Raman spectroscopy, X-ray diffraction (XRD) and reflectometry are used to explore this objective. In the first part Raman spectroscopy is investigated as an in situ monitoring technique during high temperature annealing of thin films. It investigates whether the occurrence of CZTS can be monitored when it is created from annealing a Mo/CTS/ZnS layered thin film. CuS, SnS, ZnS and CTS (Cu-Sn-S) films are prepared by physical vapor deposition. The Raman scattering intensity was compared to investigate whether their specific vibrational modes can be distinguished from each other at room temperature. Then, the CTS film is annealed between 50 and 550 °C in order to investigate whether CTS vibrational modes can be identified at elevated temperatures and to see which transitions take place within the thin film. Also, a CZTS reference film is annealed between 50 and 550 °C for reference purposes. The temperature dependence of the main CZTS modes is examined to investigate whether it can be used for in situ temperature control. Finally, a ZnS layer is deposited on the unannealed CTS film to obtain a Mo/CTS/ZnS layered film. This film is used to study the conversion of CTS/ZnS into CZTS at elevated temperatures. It was found that Raman spectroscopy can successfully be used to monitor formation of CZTS by identifying its main vibrational mode during the annealing process. The intensity of the CTS modes reduces at elevated temperatures. At 450 °C, the main CZTS mode at 338 cm-1 can be clearly identified. The second part also focuses on high temperature annealing. However, in this part the focus lies on annealing of the metal precursor films. It is explored whether specific alloys benefit or hinder the formation of secondary phases during formation of the CZTS absorber films. Also, to what extent this influences solar cell performance. In situ XRD was investigated for in situ monitoring of the pre-annealing process. Cu-poor metal precursor films are prepared by sputtering deposition. The precursors are annealed at 150 °C, 200 °C, 300 °C and 450 °C in a three zone tube furnace. The effect on the structural properties is analysed by XRD to study the formation mechanism of alloys. The precursor films are then sulfurized in a three zone tube furnace. The structural properties of the absorber are analysed and correlated with structures in the precursor. It is found that formation of SnS2 in the absorber is proportional to the remaining Sn in the pre-annealed precursor. Also, electron micrographs showed that pre-annealing temperature influences grain growth and surface precipitation of Sn-S and Zn-S. Pre-annealed absorbers at 450 °C did not exhibit these phases on the surface. Solar devices are fabricated from the absorber films and best performing devices were obtained from pre-annealed absorbers at 450 °C. They showed absence of Sn and SnS2 in, respectively, the precursor and absorber. It could be concluded that SnS2 phases are detrimental to device efficiency and that SnS2 XRD peak intensity follows an inverse proportionality with device efficiency. The third part explores reflectometry as a method to monitor a growing film during thermal evaporation in a physical vapor deposition (PVD) system. A set of six CZTS absorbers is examined by ex situ Raman spectroscopy and reflectometry to study the influence of secondary phases CuS and ZnS on reflection spectra. Composition strongly influences reflection spectra and CuS leaves a characteristic dip in the reflection spectrum at about 600 nm. An integration method was used to analyze this phenomenon quantitatively. Subsequently, a reflectometry setup is designed, developed and integrated in the PVD system. Four different CZTS co-evaporated and multi-layered films are deposited. Structural, morphological and vibrational properties are investigated. The reflection spectra are monitored during deposition and time-dependent reflection spectra are analyzed for characteristic aspects related to properties such as thickness, band gap and phase formation. CuS could not be detected in the films by the integration method due to the superposition of the CuS dip with developing interference fringes during film growth. However, in multilayered CTS/ZnS film it is found that the onset of ZnS deposition can be detected by increased reflection intensity due to reduced surface roughness. Additionally, the shifting onset of the interference fringes to lower photon energies can be used as a characteristic fingerprint during the deposition process. In conclusion, this work showed that Raman spectroscopy, XRD and reflectometry could be successfully implemented for in situ process control and monitoring of high temperature annealing and vacuum deposition of Cu-Sn-Zn-S based precursors and absorbers. The application of these in situ techniques can lead to the optimization of thin film material properties and solar cells. As such, this study has paved the way for further improvement of Cu-Sn-Zn-S based precursors and thin film absorbers. Innerhalb der letzten Jahre hat sich Kesterit Cu2ZnSnS4 (CZTS) aufgrund seiner ungiftigen Bestandteile und deren hoher Verfügbarkeit zu einer interessanten Alternative zu Kupfer Indium Gallium (di-)Selenid (CIGS) entwickelt. Zur Herstellung von Kesterit Dünnschichten wird eine Vielzahl von Methoden verwendet wie Ko-Verdampfung, Sputtern, Elektrodeposition, Spray Pyrolyse und andere. Die meisten davon beinhalten einen Temper-Schritt um die Durchmischung und Interdiffusion der Elemente zu stimulieren. Obwohl der Wirkungsgrad der Kersterit Solarzellen von verschiedenen Forschungsgruppen erhöht wurde, ist der Rekordwert von IBM von 12,6 % noch nicht gebrochen worden. Daher werden experimentelle und theoretische Studien benötigt, die den Einfluss von Fremdphasen und schädlichen Defekten auf die elektronischen Eigenschaften der CZTS Solarzellen vorhersagen. Die vorliegende Arbeit untersucht zerstörungsfreie Methoden für die in situ Prozesskontrolle und -überwachung. Dabei ist das Ziel, entscheidende Prozessschritte wie das Vortempern der Metall-Vorläufer sowie das Hochtemperatur-Tempern und die Vakuum-Abscheidung von Cu-Sn-Zn-S basierten Schichten zu optimieren. Die Untersuchung besteht aus drei Teilen, in denen Raman-Spektroskopie, Röntgendiffraktion (XRD) und Reflektometrie benutzt werden um dieses Ziel zu erreichen. Im ersten Teil wird die Ramanspektroskopie als in situ Methode zur Überwachung des Hochtemperatur-Temperns von Dünnschichten betrachtet. Es wird untersucht, ob das Entstehen von CZTS beim Tempern von gestapelten Mo/CTS/ZnS Dünnschichten beobachtet werden kann. CuS, SnS, ZnS und CTS (Cu-Sn-S) Schichten werden durch physikalische Gasabscheidung hergestellt. Die Intensität der Raman Streuung wurde vergleichen um zu untersuchen, ob die spezifischen Vibrations-Moden bei Raumtemperatur voneinander unterschieden werden können. Dann werden die CTS Schichten zwischen 50 °C und 550 °C getempert um zu untersuchen, ob die CTS Vibrations-Moden bei höheren Temperaturen identifiziert werden können und um festzustellen, welche Übergänge innerhalb der Schicht auftreten. Außerdem wurde eine CZTS Referenzschicht zwischen 50 °C und 550 °C für Referenzzwecke getempert worden. Die Temperaturabhängigkeit der CZTS Haupt-Moden werden betrachtet, um zu untersuche, ob sie für die in situ Temperaturüberwachung verwendet werden können. Abschließend wurde eine ZnS Schicht auf einem nicht getemperten CTS Film abgeschieden, um eine gestapelte Mo/CTS/ZnS Schicht zu erhalten. Diese Schicht wird verwendet, um die Umwandlung von CTS/ZnS zu CZTS bei erhöhten Temperaturen zu untersuchen. Es wurde festgestellt, dass Raman Spektroskopie erfolgreich verwendet werden kann, um die Bildung von CZTS zu überwachen, indem die Haupt-Vibrations-Moden während des Temperns identifiziert werden. Die Intensität der CTS Moden verringert sich bei höheren Temperaturen. Bei 450 °C kann die CZTS Hauptmode bei 338 cm-1 klar identifiziert werden. Der zweite Teil konzentriert sich ebenfalls auf das Hochtemperatur-Tempern. In diesem Teil liegt der Fokus allerdings auf dem Tempern der Metal-Vorläufer-Schichten. Es wird erforscht, ob bestimmte Legierungen die Entstehung von Fremdphasen während der Entstehung der CZTS Absorberschichten begünstigen oder hemmen und welchen Einfluss dies auf die Leistung der Solarzelle hat. In situ XRD wird verwendet, um die Prozesse des Vortemperns zu überwachen. Kupfer arme Metall-Vorläufer-Schichten werden durch Sputtern aufgetragen. Die Vorläufer werden bei 150 °C, 200 °C, 300 °C und 450 °C in einem Drei-Zonen-Röhren-Ofen getempert. Die Auswirkungen auf die strukturellen Eigenschaften werden mit XRD analysiert, um den Entstehungsmechanismus der Legierungen zu untersuchen. Die Vorläuferschichten werden dann in einem Drei-Zonen-Röhren-Ofen sulfurisiert. Die strukturellen Eigenschaften des Absorbers werden analysiert und mit der Struktur der Vorläufer korreliert. Es wurde festgestellt, dass die Entstehung von SnS2 im Absorber proportional zum verbleibenden Sn im vorgetemperten Vorläufer ist. Außerdem zeigen Bilder des Rasterelektronenmikroskops, dass die Temperatur des Vortemperns das Kornwachstum und das Abschieden von Sn-S und Zn-S an der Oberfläche beeinflusst. Bei 450 °C vorgetemperte Absorber weisen keine dieser Phasen an der Oberfläche auf. Solarzellen werden aus diesen Absorber-Schichten hergestellt und die besten Zellen entstanden aus den bei 450 °C vorgetemperten Absorbern. Bei diesen traten Sn und SnS2 weder im Vorläufer noch im Absorber auf. Es konnte geschlussfolgert werden, dass SnS2 Phasen schädlich für den Wirkungsgrad der Zellen sind und dass die Intensität der SnS2 XRD Peaks invers proportional zum Wirkungsgrad der Zellen ist. Der dritte Teil erforscht die Reflektometrie als Methode zur Überwachung des Schichtwachstums während des thermischen Verdampfens in einer Anlage zur physikalischen Gasabscheidung (PVD). Ein Satz aus sechs CZTS Absorbern wird mittels ex situ Raman-Spektroskopie und Reflektometrie vermessen, um den Einfluss der Fremdphasen CuS und ZnS auf die Reflexionsspektren zu untersuchen. Die Zusammensetzung beeinflusst die Reflexionsspektren stark und CuS hinterlässt eine charakteristische Senkung bei 600 nm im Reflexionsspektrum. Eine Integrationsmethode wurde verwendet um dieses Phänomen quantitativ zu analysieren. Anschließend wurde ein Reflektometrieaufbau entworfen, entwickelt und in die PVD-Anlage integriert. Vier verschiedene CZTS koverdampfte und Mehrschicht-Filme wurden abgeschieden. Strukturelle, morphologische und Vibrationseigenschaften werden untersucht. Die Reflexionsspektren werden während des Abscheidens aufgenommen und zeitabhängige Reflexionsspektren werden auf charakteristische Aspekte im Zusammenhang mit Eigenschaften wie Dicke, Bandlücke und Entstehung von Phasen untersucht. CuS konnte in den Schichten mit der Integrations-Methode wegen der Überlagerung der CuS Senkung mit dem entstehenden Interferenzmuster nicht detektiert werden. Allerdings wurde in gestapelten CTS/ZnS Schichten beobachtet werden, dass der Beginn der ZnS Abscheidung durch eine ansteigende Intensität der Reflektion aufgrund der verringerten Oberflächenrauigkeit detektiert werden kann. Zusätzlich kann die Verschiebung des Startpunkts der Interferenzen zu niedrigeren Photonenenergien als charakteristischer Fingerabdruck während des Abscheidungsprozesses verwendet werden. Zusammenfassend zeigt diese Arbeit, dass Raman-Spektroskopie, XRD und Reflektrometrie erfolgreich als in situ Prozesskontrolle und –überwachung bei Hochtemperatur-Tempern und Vakuum-Abscheidung von Cu-Sn-Zn-S basierten Vorläufern und Absorbern realisiert werden konnten. Die Anwendung dieser in situ Techniken kann zu einer Optimierung der Eigenschaften von Dünnschicht-Materialien und von Solarzellen führen. Als solche hat diese Untersuchung den Weg für weitere Verbesserung von Cu-Sn-Zn-S basierte Vorläufer und Dünnschicht-Absorber geebnet.

Download or read book Solution Processed Cu 2 ZnSn S X Se 1 x 4 Thin Films Based on Binary and Ternary Chalcogenide Nanoparticle Precursors and Their Application in Solar Cells written by and published by . This book was released on 2013 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Smart Materials in Analytical Chemistry written by Miguel de la Guardia and published by John Wiley & Sons. This book was released on 2019-01-22 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to smart materials and how they are used in sample preparation, analytical processes, and applications This comprehensive, two-volume handbook provides detailed information on the present state of new materials tailored for selective sample preparation and the legal frame and environmental side effects of the use of smart materials for sample preparation in analytical chemistry, as well as their use in the analytical processes and applications. It covers both methodological and applied analytical aspects, relating to the development and application of new materials for solid-phase extraction (SPE) and solid-phase microextraction (SPME), their use in the different steps and techniques of the analytical process, and their application in specific fields such as water, food, air, pharmaceuticals, clinical sciences and forensics. Every chapter in Handbook of Smart Materials in Analytical Chemistry is written by experts in the field to provide a comprehensive picture of the present state of this key area of analytical sciences and to summarize current applications and research literature in a critical way. Volume 1 covers New Materials for Sample Preparation and Analysis. Volume 2 handles Analytical Processes and Applications. Focuses on the development and applications of smart materials in analytical chemistry Covers both, methodological and applied analytical aspects, for the development of new materials and their use in the different steps and techniques of the analytical process and their application in specific fields Features applications in key areas including water, air, environment, pharma, food, forensic, and clinical Presents the available tools for the use of new materials suitable to aid recognition process to the sample preparation and analysis A key resource for analytical chemists, applied laboratories, and instrument companies Handbook of Smart Materials in Analytical Chemistry, 2V Set is an excellent reference book for specialists and advanced students in the areas of analytical chemistry, including both research and application environments.

Download or read book Photovoltaic Fundamentals written by Gary Cook and published by . This book was released on 1991 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chalcogenide Photovoltaics written by Roland Scheer and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive description of the most important material properties and device aspects closes the gap between general books on solar cells and journal articles on chalcogenide-based photovoltaics. Written by two very renowned authors with years of practical experience in the field, the book covers II-VI and I-III-VI2 materials as well as energy conversion at heterojunctions. It also discusses the latest semiconductor heterojunction models and presents modern analysis concepts. Thin film technology is explained with an emphasis on current and future techniques for mass production, and the book closes with a compendium of failure analysis in photovoltaic thin film modules. With its overview of the semiconductor physics and technology needed, this practical book is ideal for students, researchers, and manufacturers, as well as for the growing number of engineers and researchers working in companies and institutes on chalcogenide photovoltaics.

Download or read book Metal Nanocrystals written by Kallum M. Koczkur and published by American Chemical Society. This book was released on 2020-07-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our society depends heavily on metals. They are ubiquitous construction materials, critical interconnects in integrated circuits, common coinage materials, and more. Excitingly, new uses for metals are emerging with the advent of nanoscience, as metal crystals with nanoscale dimensions can display new and tunable properties. The optical and photothermal properties of metal nanocrystals have led to cancer diagnosis and treatment platforms now in clinical trials, while, at the same time, the ability to tune the surface features of metal nanocrystals is giving rise to designer catalysts that enable more sustainable use of precious resources. These are just two examples of how metal nanocrystals are addressing important social needs.

Download or read book Copper Zinc Tin Sulfide Based Thin Film Solar Cells written by Kentaro Ito and published by John Wiley & Sons. This book was released on 2014-12-11 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with an overview and historical background of Copper Zinc Tin Sulphide (CZTS) technology, subsequent chapters cover properties of CZTS thin films, different preparation methods of CZTS thin films, a comparative study of CZTS and CIGS solar cell, computational approach, and future applications of CZTS thin film solar modules to both ground-mount and rooftop installation. The semiconducting compound (CZTS) is made up earth-abundant, low-cost and non-toxic elements, which make it an ideal candidate to replace Cu(In,Ga)Se2 (CIGS) and CdTe solar cells which face material scarcity and toxicity issues. The device performance of CZTS-based thin film solar cells has been steadily improving over the past 20 years, and they have now reached near commercial efficiency levels (10%). These achievements prove that CZTS-based solar cells have the potential to be used for large-scale deployment of photovoltaics. With contributions from leading researchers from academia and industry, many of these authors have contributed to the improvement of its efficiency, and have rich experience in preparing a variety of semiconducting thin films for solar cells.

Download or read book Two Dimensional Transition Metal Dichalcogenides written by Narayanasamy Sabari Arul and published by Springer. This book was released on 2019-07-30 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced synthesis techniques adopted to fabricate two-dimensional (2D) transition metal dichalcogenides (TMDs) materials with its enhanced properties towards their utilization in various applications such as, energy storage devices, photovoltaics, electrocatalysis, electronic devices, photocatalysts, sensing and biomedical applications. It provides detailed coverage on everything from the synthesis and properties to the applications and future prospects of research in 2D TMD nanomaterials.

Download or read book Semiconductor Materials for Solar Photovoltaic Cells written by M. Parans Paranthaman and published by Springer. This book was released on 2015-09-16 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current status of semiconductor materials for conversion of sunlight to electricity, and highlights advances in both basic science and manufacturing. Photovoltaic (PV) solar electric technology will be a significant contributor to world energy supplies when reliable, efficient PV power products are manufactured in large volumes at low cost. Expert chapters cover the full range of semiconductor materials for solar-to-electricity conversion, from crystalline silicon and amorphous silicon to cadmium telluride, copper indium gallium sulfide selenides, dye sensitized solar cells, organic solar cells, and environmentally friendly copper zinc tin sulfide selenides. The latest methods for synthesis and characterization of solar cell materials are described, together with techniques for measuring solar cell efficiency. Semiconductor Materials for Solar Photovoltaic Cells presents the current state of the art as well as key details about future strategies to increase the efficiency and reduce costs, with particular focus on how to reduce the gap between laboratory scale efficiency and commercial module efficiency. This book will aid materials scientists and engineers in identifying research priorities to fulfill energy needs, and will also enable researchers to understand novel semiconductor materials that are emerging in the solar market. This integrated approach also gives science and engineering students a sense of the excitement and relevance of materials science in the development of novel semiconductor materials. · Provides a comprehensive introduction to solar PV cell materials · Reviews current and future status of solar cells with respect to cost and efficiency · Covers the full range of solar cell materials, from silicon and thin films to dye sensitized and organic solar cells · Offers an in-depth account of the semiconductor material strategies and directions for further research · Features detailed tables on the world leaders in efficiency demonstrations · Edited by scientists with experience in both research and industry

Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.

Download or read book Anisotropic Metal Chalcogenide Nanomaterials written by Geon Dae Moon and published by Springer. This book was released on 2018-12-14 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the recent advances in designing and synthesizing one- and two-dimensional metal chalcogenide nanostructures, along with their practical applications, helping readers understand what has happened, and what is currently happening in the field of nanotechnology. It also includes a comprehensive table showing 1D and 2D nanostructured metal chalcogenides, which presents the recent developments from a synthetic point of view. Further, it describes the wide applicability of anisotropic metal chalcogenides, such as in electronics, energy storage and conversion, and sensors. Lastly it discusses the current understanding of the thermodynamic and kinetic aspects associated with the forming mechanisms of anisotropic metal chalcogenide nanostructures. This book is a valuable reference resource for practitioners and researchers, enabling them to obtain a quick overview of anisotropic metal chalcogenide nanomaterials through synthetic approaches and related applications. Presenting representative applications of anisotropic metal chalcogenide nanomaterials that are important in the industrial sector, it is also of interest to academics and industry specialists.

Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data

Download or read book Nanotechnology in Endodontics written by Anil Kishen and published by Springer. This book was released on 2015-03-18 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed information on the emerging applications of nanomaterials and nanoparticles within endodontics, highlighting the exciting potential clinical impact of nanotechnology in the field. The range of applications covered is diverse, encompassing drug and gene delivery, tissue engineering, antibacterial strategies, dentin tissue stabilization, dentin pulp regeneration and use in restorative and endodontic materials. Important scientific background information relating to each application is provided, with clear coverage of basic principles. In addition, potential pitfalls are identified and explained. The cytotoxicity of nanomaterials and nanoparticles is also addressed in a separate chapter. The book will be of value both for endodontic practitioners and for all scientists and graduate students who are interested in the application of nanotechnology in endodontics.

Download or read book Semiconductor Nanocrystals written by Alexander L. Efros and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physics book that covers the optical properties of quantum-confined semiconductor nanostructures from both the theoretical and experimental points of view together with technological applications. Topics to be reviewed include quantum confinement effects in semiconductors, optical adsorption and emission properties of group IV, III-V, II-VI semiconductors, deep-etched and self assembled quantum dots, nanoclusters, and laser applications in optoelectronics.

Download or read book One Dimensional Nanostructures written by Tianyou Zhai and published by John Wiley & Sons. This book was released on 2012-10-19 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the latest research breakthroughs and applications Since the discovery of carbon nanotubes in 1991, one-dimensional nanostructures have been at the forefront of nanotechnology research, promising to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. With contributions from 68 leading international experts, this book reviews both the underlying principles as well as the latest discoveries and applications in the field, presenting the state of the technology. Readers will find expert coverage of all major classes of one-dimensional nanostructures, including carbon nanotubes, semiconductor nanowires, organic molecule nanostructures, polymer nanofibers, peptide nanostructures, and supramolecular nanostructures. Moreover, the book offers unique insights into the future of one-dimensional nanostructures, with expert forecasts of new research breakthroughs and applications. One-Dimensional Nanostructures collects and analyzes a wealth of key research findings and applications, with detailed coverage of: Synthesis Properties Energy applications Photonics and optoelectronics applications Sensing, plasmonics, electronics, and biosciences applications Practical case studies demonstrate how the latest applications work. Tables throughout the book summarize key information, and diagrams enable readers to grasp complex concepts and designs. References at the end of each chapter serve as a gateway to the literature in the field. With its clear explanations of the underlying principles of one-dimensional nanostructures, this book is ideal for students, researchers, and academics in chemistry, physics, materials science, and engineering. Moreover, One-Dimensional Nanostructures will help readers advance their own investigations in order to develop the next generation of applications.