Download or read book GaN AIN InN and their Alloys Volume 831 written by Christian Wetzel and published by Cambridge University Press. This book was released on 2005-07-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses GaN and Related Alloys and reflects an emerging emphasis on the binaries of InN and AlN. The major thrust here is the topical development of thin-film growth, bulk growth techniques, methods to cover the full ternary and quaternary alloy ranges toward InN and AlN and their characterization; strategies for structural defect reduction and their characterization; ways to better control p-type doping and its characterization; device and defect physics, including polarization effects; physics of surfaces and interfaces; and device processing techniques. In addition, advances in MBE devices, high-power electronics, RF performance of electronics, UV emitters, high-efficiency light emitters, photo and chemical sensors, as well as new applications within the group-III nitrides, are also covered. The book captures the current status of this field and will be useful for researchers working with group-III nitrides, as well as for students who seek entry into this subject.

Download or read book Advances in Wrought Magnesium Alloys written by Colleen Bettles and published by Elsevier. This book was released on 2012-04-25 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book summarises the wealth of recent research on our understanding of process-property relationships in wrought magnesium alloys and the way this understanding can be used to develop a new generation of alloys for high-performance applications.After an introductory overview of current developments in wrought magnesium alloys, part one reviews fundamental aspects of deformation behaviour. These chapters are the building blocks for the optimisation of processing steps covered in part two, which discusses casting, extrusion, rolling and forging technologies. The concluding chapters cover applications of wrought magnesium alloys in automotive and biomedical engineering.With its distinguished editors, and drawing on the work of leading experts in the field, Advances in wrought magnesium alloys is a standard reference for those researching, manufacturing and using these alloys. - Summarises recent research on our understanding of process-property relationships in wrought magnesium alloys - Discusses the way this understanding can be used to develop a new generation of alloys for high-performance applications - Reviews casting, extrusion, rolling and forging technologies, fundamental aspects of deformation behaviour, and applications of wrought magnesium alloys in automotive and biomedical engineering

Download or read book Essential Readings in Magnesium Technology written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of the best papers in the history of Magnesium Technology, a definitive annual reference in the field of magnesium production and related light metals technologies. The volume contains a strong topical mix of application and fundamental research articles on magnesium technology. Section titles: 1.Magnesium Technology History and Overview 2.Electrolytic and Thermal Primary Production 3.Melting, Refining, Recycling, and Life-Cycle Analysis 4.Casting and Solidification 5.Alloy and Microstructural Design 6.Wrought Processing 7.Modeling and Simulation 8.Joining 9.Corrosion, Surface Treatment, and Coating

Download or read book Magnesium 2021 written by Alan Luo and published by Springer Nature. This book was released on 2021-05-28 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection from the 12th International Conference on Magnesium Alloys and Their Applications (Mg 2021)—the longest running conference dedicated to the development of magnesium alloys—covers the breadth of magnesium research and development, from primary production to applications to end-of-life management. Authors from academia, government, and industry discuss new developments in magnesium alloys and share valuable insights. Topics in this volume include but are not limited to the following: Primary production Alloy development Solidification and casting processes Forming and thermo-mechanical processing Other manufacturing process development (including joining and additive manufacturing) Corrosion and protection Modeling and simulation Structural, functional, biomedical, and energy applications Advanced characterization and fundamental theories Recycling and environmental issues

Download or read book Magnesium Technology 2014 written by Martyn Alderman and published by Springer. This book was released on 2016-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers in this collection represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. This volume covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications in such areas as hydrogen storage.

Download or read book Introduction to Texture Analysis written by Olaf Engler and published by CRC Press. This book was released on 2009-11-16 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping broke new ground by collating seventy years worth of research in a convenient single-source format. Reflecting emerging methods and the evolution of the field, the second edition continues to provide comprehensive coverage of the concepts, pra

Download or read book Fundamentals of Magnesium Alloy Metallurgy written by Mihriban O Pekguleryuz and published by Elsevier. This book was released on 2013-03-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and magnesium alloys offer a wealth of valuable properties, making them of great interest for use across a wide range of fields. This has led to extensive research focused on understanding the properties of magnesium and how these can be controlled during processing. Fundamentals of magnesium alloy metallurgy presents an authoritative overview of all aspects of magnesium alloy metallurgy, including physical metallurgy, deformation, corrosion and applications.Beginning with an introduction to the primary production of magnesium, the book goes on to discuss physical metallurgy of magnesium and thermodynamic properties of magnesium alloys. Further chapters focus on understanding precipitation processes of magnesium alloys, alloying behaviour of magnesium, and alloy design. The formation, corrosion and surface finishing of magnesium and its alloys are reviewed, before Fundamentals of magnesium alloy metallurgy concludes by exploring applications across a range of fields. Aerospace, automotive and other structural applications of magnesium are considered, followed by magnesium-based metal matrix composites and the use of magnesium in medical applications.With its distinguished editors and international team of expert contributors, Fundamentals of magnesium alloy metallurgy is a comprehensive tool for all those involved in the production and application of magnesium and its alloys, including manufacturers, welders, heat-treatment and coating companies, engineers, metallurgists, researchers, designers and scientists working with these important materials. - Overviews all aspects of magnesium alloy metallurgy - Discusses physical metallurgy of magnesium and thermodynamic properties of magnesium alloys - Reviews the formation, corrosion and surface finishing of magnesium and its alloys

Download or read book Magnesium Technology 2012 written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.

Download or read book Dislocation Modelling of Physical Systems written by M.F. Ashby and published by Elsevier. This book was released on 2013-10-22 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocation Modelling of Physical Systems contains the Proceedings of the International Conference held at Gainesville, Florida, USA on June 22-27, 1980. The book emphasizes the growing interest in relating dislocation theoretic concepts to engineering problems. Topic areas chosen ranged from the fundamental, such as properties of single dislocations, to the more applied, such as fracture. The papers are grouped specifically based on the main topics they discuss. These topics include fracture; point defects and dislocations; structure dependence of mechanical behavior; properties of single dislocations; plasticity and geometry of deformation; internal friction effects; and boundaries.

Download or read book Magnesium Technology 2020 written by and published by . This book was released on 2020 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2020 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.

Download or read book Recent Developments in the Study of Recrystallization written by Peter Wilson and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization is a phenomenon moderately well documented in the geological and metallurgical literature. This book provides a timely overview of the latest research and methods in a variety of fields where recrystallization is studied and is an important factor. The main advantage of a new look at these fields is the rapid increase in modern techniques, such as TEM, spectrometers and modeling capabilities, all of which are providing us with far better images and analysis than ever previously possible. This book will be invaluable to a wide range of research scientists; metallurgists looking to improve properties of alloys, those interested in how the latest equipment may be used to image grains and to all those who work with frozen aqueous solutions where recrystallization may be a problem.

Download or read book Cyclic Plasticity of Engineering Materials written by Guozheng Kang and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cyclic plasticity constitutive models for different materials. Analysis of cyclic plasticity in engineering structures. This book is an important reference for students, practicing engineers and researchers who study cyclic plasticity in the areas of mechanical, civil, nuclear, and aerospace engineering as well as materials science.

Download or read book Magnesium Alloys written by Frank Czerwinski and published by BoD – Books on Demand. This book was released on 2011-01-14 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists and engineers for decades searched to utilize magnesium, known of its low density, for light-weighting in many industrial sectors. This book provides a broad review of recent global developments in theory and practice of modern magnesium alloys. It covers fundamental aspects of alloy strengthening, recrystallization, details of microstructure and a unique role of grain refinement. The theory is linked with elements of alloy design and specific properties, including fatigue and creep resistance. Also technologies of alloy formation and processing, such as sheet rolling, semi-solid forming, welding and joining are considered. An opportunity of creation the metal matrix composite based on magnesium matrix is described along with carbon nanotubes as an effective reinforcement. A mixture of science and technology makes this book very useful for professionals from academia and industry.

Download or read book Structure and Mechanical Properties of Transition Group Metals Alloys and Intermetallic Compounds written by Tomasz Czujko and published by MDPI. This book was released on 2019-07-11 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Special Issue is to present the latest theoretical and experimental achievements concerning the mechanisms of microstructural change in metallic materials subject to different processing methods, and their effect on mechanical properties. It is my pleasure to present a series of compelling scientific papers written by scientists from the community of transition group metals, alloys, and intermetallic compounds.

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.

Download or read book Magnesium Technology 2016 written by Alok Singh and published by John Wiley & Sons. This book was released on 2016-02-03 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2016 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications. The collection includes more than 50 papers.

Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.