Download or read book The Rheology of Lubricants written by T. C. Davenport and published by . This book was released on 1973 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rheology and Elastohydrodynamic Lubrication written by B.O. Jacobson and published by Elsevier. This book was released on 1991-07-24 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a thorough overview on recent developments in lubricant rheology, elastohydrodynamic lubrication and the effects of surface roughness and particulate contamination in the lubricant on the overall behaviour of a heavily loaded lubricated contact. One of the aims of the book is to make clear to the reader that a Newtonian model for the lubricant behaviour does not have enough degrees of freedom to be able to describe the friction - traction behaviour of heavily loaded lubricated contacts or the oil film build-up and collapse under surface asperities for rough surfaces. The book contains quite a lot of experimental data of lubricants at high pressures, both solidification pressures, compressibilities and shear strength increase coefficients, which make it possible to estimate the friction and power loss in heavily loaded lubricated contacts for different pressures, temperatures, sliding speeds, and lubricant types. This is the first time that data of this type has been included in a textbook and it is hoped that the questions highlighted will serve to initiate and guide future research in this field.

Download or read book Proprietes Rheologiques Des Lubrifiants written by Jean Briant and published by Editions TECHNIP. This book was released on 1989 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Pressure Rheology for Quantitative Elastohydrodynamics written by Scott S. Bair and published by Elsevier. This book was released on 2007-03-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational elastohydrodynamics, a part of tribology, has existed happily enough for about fifty years without the use of accurate models for the rheology of the liquids used as lubricants. For low molecular weight liquids, such as low viscosity mineral oils, it has been possible to calculate, with precision, the film thickness in a concentrated contact provided that the pressure and temperature are relatively low, even when the pressure variation of viscosity is not accurately modelled in detail. Other successes have been more qualitative in nature, using effective properties which come from the fitting of parameters used in calculations to experimental measurements of the contact behaviour, friction or film thickness. High Pressure Rheology for Quantitative Elastohydrodynamics is intended to provide a sufficiently accurate framework for the rheology of liquids at elevated pressure that it may be possible for computational elastohydrodynamics to discover the relationships between the behaviour of a lubricated concentrated contact and the measurable properties of the liquid lubricant. The required high-pressure measurement techniques are revealed in detail and data are presented for chemically well-defined liquids that may be used as quantitative reference materials.* Presents the property relations required for a quantitative calculation of the tribological behaviour of lubricated concentrated contacts.* Details of high-pressure experimental techniques.* Complete description of the pressure and temperature dependence of viscosity for high pressures.* Some little-known limitations on EHL modelling.

Download or read book Lubricants and Special Fluids written by V. Stepina and published by Elsevier. This book was released on 1992-12-04 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: The constitution, properties, production and applications of lubricants and related fluids of all states of aggregation are reviewed in this volume. Special attention is devoted to synthetic lubricants and to additives for lubricants. Standards of quality are listed, together with systems of classification and the most important specifications and methods of testing the properties of lubricants and their performance in service. Future trends in lubricants are also discussed. Non-conventional lubricants and additives are examined in detail. The relationship between constitution and properties of lubricants, e.g., the viscosity -temperature -pressure relationship, the behaviour in ageing, the biodegradability, synergisms and antagonisms in the blends of lubricants, of additives and lubricant-additive are analyzed. Guidelines for the selection of lubricants and fluids in the design, service and maintenance of machines and machine parts are also given. The work will be of interest to all those involved in the research and development of petrochemical and machinery industries, as well as lecturers and students specializing in this field.

Download or read book The Rheology of Lubricants written by T. C. Davenport and published by John Wiley & Sons. This book was released on 1973 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Rheology of Lubricants written by Thomas C. Davenport and published by . This book was released on 1973 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Temperature Lubricant Rheology Measurement and Relevance to Engine Operation written by Robert B. Rhodes and published by ASTM International. This book was released on 1992 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers were presented at a symposium held in Austin, Texas, in December 1991. Subjects include a history of ASTM accomplishments in low temperature engine oil rheology from 1966-1992, critical aspects of pumping viscosity by mini-rotary viscometer, the scanning Brookfield technique of low temperatur

Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.

Download or read book The Rheology of Lubricants written by D. M. Binding and published by . This book was released on 1976 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants

Download or read book Lubricants Rheology and Tribology and Driveline Fluids written by Society of Automotive Engineers and published by . This book was released on 2003 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Technique for Determining the Rheology of Lubricants at High Pressures and High Shear Rates written by Kaliat Thazhathveettil Ramesh and published by . This book was released on 1985 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lubricant Properties An written by Jacques Denis and published by Editions OPHRYS. This book was released on 2000 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Rheology of Lubricants Under Impact Conditions written by Michael John Booth and published by . This book was released on 1969 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Rheology of Lubricating Grease written by Corneliu Balan and published by . This book was released on 2000 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oils Rheology Tribology and Driveline Fluids written by and published by . This book was released on 2004 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: