Download or read book New Trends in Removal of Heavy Metals from Industrial Wastewater written by Maulin P. Shah and published by Elsevier. This book was released on 2021-04-23 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Trends in Removal of Heavy Metals from Industrial Wastewater covers the applicable technologies relating to the removal of heavy metals from wastewater and new and emerging trends in the field, both at the laboratory and industrial scale. Sections explore new environmentally friendly technologies, the principles of sustainable development, the main factors contributing to heavy metal removal from wastewater, methods and procedures, materials (especially low-cost materials originated from industrial and agricultural waste), management of wastewater containing heavy metals and wastewater valorization, recycling, environmental impact, and wastewater policies for post heavy metal removal. This book is an advanced and updated vision of existing heavy metal removal technologies with their limitations and challenges and their potential application to remove heavy metals/environmental pollutants through advancements in bioremediation. Finally, sections also cover new trends and advances in environmental bioremediation with recent developments in this field by an application of chemical/biochemical and environmental biotechnology. - Outlines the fate and occurrence of heavy metals in Wastewater Treatment Plants (WWTPs) and potential approaches for their removal - Describes the techniques currently available for removing heavy metals from wastewater - Discusses the emerging technologies in heavy metal removal - Covers biological treatments to remove heavy metals - Includes the valorization of heavy metal containing wastewater

Download or read book Trace Metals in the Environment written by Mario Alfonso Murillo-Tovar and published by BoD – Books on Demand. This book was released on 2021-01-07 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The occurrence of heavy metals in the environment, even in traces, represents a severe risk for the ecosystems and can be dangerous to human health. However, a better understanding of the main aspects involved is still needed to reduce its negative impact on the environment and health. This book covers the recent methods used for the evaluation of heavy metal pollution and the identification of its sources, descriptions of some of the processes involved in its mobility and transport, attempts to address health and environmental effects of heavy metals pollution, and presents alternative technologies for its removal and remediation from environmental samples. Therefore, this book is recommended for experts in the comprehensive management of metal contamination in different environmental compartments.

Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2005-03-11 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.

Download or read book Biosorption written by Jan Derco and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Municipal and industrial wastewaters contain a wide spectrum of pollutants. Their effective removal presents a challenge for water treatment technology. Biosorption of nutrients and pollutants has been used in sewage treatment since the discovery of the activated sludge process. It is a passive uptake process by which pollutants are adsorbed on the surface of cell walls and/or dissolved in structures of microorganism cells that are present in sludge. Sorbed pollutants remain in the sludge and can be potentially released back into the environment depending on their condition and the reversibility of the pollutant-sludge interaction. An overview of typical biosorption applications for the removal of nutrients, organic pollutants, and metals in wastewater treatment is provided in different areas of their use for the protection of aquatic ecosystems and human health. This book will be of interest to operators of wastewater treatment plants and sludge treatment and disposal facilities as well as to researchers and university students in the field of environmental engineering.

Download or read book Removal of Toxic Pollutants through Microbiological and Tertiary Treatment written by Maulin P. Shah and published by Elsevier. This book was released on 2020-08-20 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Removal of Toxic Pollutants through Microbiological and Tertiary Treatment: New Perspectives offers a current account of existing advanced oxidation strategies - including their limitations, challenges, and potential applications - in removing environmental pollutants through microbiological and tertiary treatment methods. The book introduces new trends and advances in environmental bioremediation technology, with thorough discussion of recent developments in the field. Updated information as well as future research directions in the field of bioremediation of industrial wastes is included. This book is an indispensable guide to students, researchers, scientists, and professionals working in fields such as microbiology, biotechnology, environmental sciences, eco-toxicology, and environmental remediation. The book also serves as a helpful guide for waste management professionals and those working on the biodegradation and bioremediation of industrial wastes and environmental pollutants for environmental sustainability. - Introduces various treatment schemes, including microbiological and tertiary technologies for bioremediation of environmental pollutants and industrial wastes - Includes pharmaceutical wastewater, oil refinery wastewater, distillery wastewater, tannery wastewater, textile wastewater, mine tailing wastes, plastic wastes, and more - Describes the role of relatively new treatment technologies and their approaches in bioremediation, including molecular and protein engineering technologies, microbial enzymes, bio surfactants, plant-microbe interactions, and genetically engineered organisms - Provides many advanced technologies in the field of bioremediation and phytoremediation, including electro-bioremediation technology, microbial fuel cell technology, nano-bioremediation technology, and phytotechnologies

Download or read book Nanohybrid and Nanoporous Materials for Aquatic Pollution Control written by Lin Tang and published by Elsevier. This book was released on 2018-10-12 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanohybrid and Nanoporous Materials for Aqueous Environmental Pollution Control gives a comprehensive treatment of fabrication methods and their application in environmental remediation, including adsorption, catalysis and signal transfer in pollutant detection. The design, fabrication and application of nanohybrid and nanoporous materials for environmental pollution control are described in detail, along with discussions on their synthesis, characterization, and applications in different aspects of pollutant treatment. Chapters introduce the design and synthesis of magnetic nanohybrid materials, advanced oxide process-photocatalytic degradation of environmental pollutants based on nanomaterials, and nanohybrids of iron based materials for reduction and oxidation of aqueous recalcitrant pollutant. Finally, challenges and suggestions in the application of nanomaterials for environmental pollution control are discussed, as is an analysis of the future perspective of nanomaterials for environmental application. - Presents the most up-to-date developments in this rapidly progressing field - Provides suggestions to address challenges and solve current problems related to the application of nanoporous materials - Discusses future trends and perspectives in the area of nanohybrid and nanoporous materials

Download or read book Electrochemical Water Treatment Methods written by Mika Sillanpää and published by Butterworth-Heinemann. This book was released on 2017-06-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Methods for Water Treatment: Fundamentals, Methods and Full Scale Applications covers all traditional, emerging and combined methods currently available for the treatment of surface, drinkable water and industrial wastewater. Topics covered include an overview of pollutants and treatment methods, an extended introduction to electrochemical processes in water treatment, electrochemical oxidation (including electrodesinfection, electrochemical reduction, electrocoagulation, electroflotation, and electrodialysis. In addition, emerging and combined methods are presented, as is a discussion on the available equipment necessary to scale up the operation of all methods. Electrochemical technologies have many common issues in terms of design, operation and performance. This book brings together a wealth of information on all different methods in a single source to provide broad insights and enable the connection between challenges and opportunities for different methods. The combination of technical information, design and case studies offered helps researchers better understand the challenges associated with scale up and implementation. - Covers all electrochemical methods for water treatment - Includes methods for the treatment of surface, drinking water and industrial wastewater - Presents discussions on equipment in the context of scaling up the operation

Download or read book Biosorption of Heavy Metals written by Bohumil Volesky and published by CRC Press. This book was released on 1990-08-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art volume represents the first comprehensively written book which focuses on the new field of biosorption. This fascinating work conveys essential fundamental information and outlines the perspectives of biosorption. It summarizes the metal-sorbing properties of nonliving bacterial, fungal, and algal biomass, plus highlights relevant metal-binding mechanisms. This volume also discusses the aspects of obtaining and processing microbial biomass and metal-chelating chemicals into industrially applicable biosorbent products. Microbiologists, chemists, and engineers with an interest in new technological and scientific horizons will find this reference indispensable.

Download or read book Heavy Metals In Water written by Sanjay K. Sharma and published by Royal Society of Chemistry. This book was released on 2014 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest research on dissolved heavy metals in drinking water and their removal.

Download or read book Environmental Nanotechnology for Water Purification written by Shahid Ul Islam and published by John Wiley & Sons. This book was released on 2020-07-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dyes, pigments and metals are extensively used in food, paper, carpet, rubber, plastics, cosmetics, and textile industries, in order to color and finish products. As a result, they generate a considerable amount of coloured wastewater rich in organic, inorganic, and mineral substances which are continuously polluting the water bodies and affecting human and aquatic life. Besides these industries, urban and agricultural activities also generate effluents high in biochemical oxygen demand (BOD) and chemical oxygen demand (COD). In recent years, considerable research work has been done in this area and is underway to eliminate heavy metals particularly mercury (Hg), chromium (Cr), lead (Pb), selenium and cadmium (Cd) and synthetic dyes from polluted waters which have high toxicity and carcinogenicity. Currently a number of methods are in operation to decontaminate the polluted waters. Among several purification technologies, use of nanoparticles/composites have gained much attention as efficient purification technology due to its many advantages such as simple synthesis, special chemical and physical properties, unique photocatalytic activity and beneficial antimicrobial properties and high efficiency. The book Environmental Nanotechnology for Water Purification comprehensively covers and provides new insights on all nanoparticles, composites and advanced methods employed in water purification.

Download or read book Biosorbents for Metal Ions written by D A John Wase and published by CRC Press. This book was released on 1997-08-05 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals can be dispersed, both naturally and by man's activities, into any of the Earth's elements - soil, water or air. Biological techniques for removing metal pollutants from soil, air or water are now attracting great interest, both because they are seen as more environmentally friendly than chemical treatments, and because, in some cases at lea

Download or read book Advances in Wastewater Treatment I written by Vimal Gandhi and published by Materials Research Forum LLC. This book was released on 2021-02-15 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents new materials and methods for waste water treatments; including advanced oxidation processes, membrane technologies, detection and removal of heavy metals and organic compounds, and the use of nanomaterials, low cost adsorbents and bio flocculants. Keywords: Wastewater Treatment, Organic Molecule Degradation, Bio Flocculants, Coagulants, Pyrene, Pharmaceutical Compounds, Photocatalytic Degradation, Nanocrystalline Titanium Dioxide, Arsenic Removal, Membrane Technology, Activated Charcoal, Adsorbent Derived from Egg Shells, Degradation of Polycyclic Aromatic Hydrocarbons, Colorimetric Analysis, Luminescence, Spectroscopy, Atomic Absorption, Mass Spectrometric and Biosensor Based Techniques.

Download or read book Wastewater Treatment written by Maulin P. Shah and published by Elsevier. This book was released on 2021-01-30 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater Treatment: Cutting-Edge Molecular Tools, Techniques and Applied Aspects reports new findings in existing molecular biology strategies, including their limitations, challenges and potential application to remove environmental pollutants through advancements made in cutting edge tools. In addition, the book introduces new trends and advances in environmental bioremediation with thorough discussions on recent developments in this field. - Describes the application of different omics tools in wastewater treatment plants (WWTPs) - Describes the role of microorganisms in WWTPs - Points out the reuse of treated wastewater through emerging technologies - Includes the recovery of resources from wastewater - Emphasizes the need for the use of cutting-edge molecular tools

Download or read book Advanced Industrial Wastewater Treatment and Reclamation of Water written by Swapnila Roy and published by Springer Nature. This book was released on 2021-11-20 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on industrial wastes that either join the streams or other natural water bodies directly, or are emptied into the municipal sewers, and their characteristics vary widely depending on the source of production and the raw material used by the industry, even during pre-industrial, industrial period and prospect of wastewater treatment for water resource conservation. The treatment of industrial wastewater can be done in part or as a whole either by the biological or chemical processes. Advanced treatment methods like membrane separation, ultra-filtration techniques and adsorption are elaborated. It would emphasize and facilitate a greater understanding of all existing available research, i.e., theoretical, methodological, well-established and validated empirical work, associated with the environment and climate change aspects.

Download or read book Biochemical Toxicology written by Muharrem Ince and published by BoD – Books on Demand. This book was released on 2020-07-29 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biochemical Toxicology - Heavy Metals and Nanomaterials provides an overview of biochemical contamination, nanomaterials and toxic metals, and measurement techniques. It explains and clarifies important studies and compares and develops new and groundbreaking measurement techniques in the fields of organic and inorganic pollution and nanoscience. It is highly recommended for professionals and readers interested in the environment and human health.

Download or read book Green Adsorbents for Pollutant Removal written by Grégorio Crini and published by Springer. This book was released on 2018-06-27 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume on adsorption using green adsorbents and is written by international contributors who are the leading experts in the adsorption field. The first volume provides an overview of fundamentals and design of adsorption processes. For people who are new to the field, the book starts by two overview chapters presenting the principles and properties of wastewater treatment and adsorption processes. The book also provides a comprehensive source of knowledge on acid-base properties of biosorbents. It discusses fractal-like kinetic models for fluid-solid adsorption, reports on the chemical characterization of oxidized activated carbons for metal removal, and the use of magnetic biosorbents in water treatment. Furthermore, the thermodynamic properties of metals adsorption by green adsorbents, and biosorption of polycyclic aromatic hydrocarbons and organic pollutants are reviewed, and finally the recent trends and impact of nanomaterials as green adsorbent and potential catalysts for environmental applications are summarized. The audience for this book includes students, environmentalists, engineers, water scientists, civil and industrial personnel who wish to specialize in adsorption technology. Academically, this book will be of use to students in chemical and environmental engineering who wish to learn about adsorption and its fundamentals. It has also been compiled for practicing engineers who wish to know about recent developments on adsorbent materials in order to promote further research toward improving and developing newer adsorbents and processes for the efficient removal of pollutants from industrial effluents. It is hoped that the book will serve as a readable and useful presentation not only for undergraduate and postgraduate students but also for the water scientists and engineers and as a convenient reference handbook in the form of numerous recent examples and appended information.

Download or read book Physico Chemical Wastewater Treatment and Resource Recovery written by Robina Farooq and published by BoD – Books on Demand. This book was released on 2017-05-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book on Physico-Chemical Treatment of Wastewater and Resource Recovery provides an efficient and low-cost solution for remediation of wastewater. This book focuses on physico-chemical treatment via advanced oxidation process, adsorption, its management and recovery of valuable chemicals. It discusses treatment and recovery process for the range of pollutants including BTX, PCB, PCDDs, proteins, phenols, antibiotics, complex organic compounds and metals. The occurrence of persistent pollutants poses deleterious effects on human and environmental health. Simple solutions for recovery of valuable chemicals and water during physico-chemical treatment of wastewater are discussed extensively. This book provides necessary knowledge and experimental studies on emerging physico-chemical processes for reducing water pollution and resource recovery.