Download or read book Iowa State Journal of Research written by Iowa. State College, Cedar Falls and published by . This book was released on 1979 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer. This book was released on 1982-02-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing. house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 25 (thesis year 1980) a total of 10,308 theses titles from 27 Canadian and 214 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 25 reports theses submitted in 1980, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Coagulation and Flocculation in Water and Wastewater Treatment written by John Bratby and published by IWA Publishing. This book was released on 2006-10-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coagulation and Flocculation in Water and Wastewater Treatment provides a comprehensive account of coagulation and flocculation techniques and technologies in a single volume covering theoretical principles to practical applications. Thoroughly revised and updated since the 1st Edition it has been progressively modified and increased in scope to cater for the requirements of practitioners involved with water and wastewater treatment. A thorough gamut of treatment scenarios is attempted, including turbidity, color and organics removal, including the technical aspects of enhanced coagulation. The effects of temperature and ionic content are described as well as the removal of specific substances such as arsenic and phosphorus. Chemical phosphorus removal is dealt with in detail, Rapid mixing for efficient coagulant utilization, and flocculation are dealt with in specific chapters. Water treatment plant waste sludge disposal is dealt with in considerable detail, in an Appendix devoted to this subject. Invaluble for water scientists, engineers and students of this field, Coagulation and Flocculation in Water and Wastewater Treatment is a convenient reference handbook in the form of numerous examples and appended information.
Download or read book Encyclopedia of Chemical Technology Alkanolamines to antibiotics glycopeptides written by and published by . This book was released on 1992 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Chemical Technology written by and published by . This book was released on 1978 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alphabetical arrangement of entries that reflect current topics of interest to scientists, chemists, and engineers, e.g., health, safety, toxicology, and new materials. Comprehensive coverage. Each entry consists of lengthy signed article, with illustrations and bibliography.
Download or read book Polysaccharides as a Green and Sustainable Resources for Water and Wastewater Treatment written by Nurudeen A. Oladoja and published by Springer. This book was released on 2017-05-16 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief critically reviews the structure and applications of polysaccharide based materials as a green and sustainable resource in water and water treatment operations. The authors present a fascinating insight into the application of this renewable resource in water and wastewater treatment operations approached from multiple perspectives: mechanistic insight into the coagulation efficiency of polysaccharides based coagulants; progress and prospects of polysaccharide composites as adsorbent for water and wastewater treatment; structural modifications of polysaccharides for enhanced performance as adsorbents; tuning polysaccharides framework for optimal coagulation efficiency; and tapping into microbial polysaccharides for water and wastewater purifications.This brief is aimed at professionals active in the science and engineering aspects of water and wastewater treatment operations.
Download or read book The Science and Technology of Industrial Water Treatment written by Zahid Amjad and published by CRC Press. This book was released on 2010-04-05 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral scale deposits, corrosion, suspended matter, and microbiological growth are factors that must be controlled in industrial water systems. Research on understanding the mechanisms of these problems has attracted considerable attention in the past three decades as has progress concerning water treatment additives to ameliorate these concerns.
Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more
Download or read book Surface Charging and Points of Zero Charge written by Marek Kosmulski and published by CRC Press. This book was released on 2009-05-14 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Detailed Resource Available on Points of Zero ChargeWith their work growing in complexity, chemists involved with surface phenomena-related projects have outgrown the common resources available to them on points of zero charge (PZC) of oxides. Reporting on a limited number of materials in a limited number of scenarios, these resources ofte
Download or read book Treatment of Micropollutants in Water and Wastewater written by Jurate Virkutyte and published by IWA Publishing. This book was released on 2010-08-14 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years there has been a growing concern over the increasing concentration of micropollutants originating from a great variety of sources including pharmaceutical, chemical engineering and personal care product industries in rivers, lakes, soil and groundwater. As most of the micropollutants are polar and persistent compounds, they are only partially or not at all removed from wastewater and thus can enter the environment posing a great risk to the biota. It is hypothesized that wastewater is one of the most important point sources for micropollutants. Treatment of Micropollutants in Water and Wastewater gives a comprehensive overview of modern analytical methods and will summarize novel single and hybrid methods to remove continuously emerging contaminants - micropollutants from the aqueous phase. New trends (e.g. sensor technology, nanotechnology and hybrid treatment technologies) are described in detail. The book is very timely because the new techniques are still in the development phase and have to be realized not only in the laboratory but also on a larger scale. The content of the book is divided into chapters that present current descriptive and analytical methods that are available to detect and measure micropollutants together with detailed information on various chemical, biological and physicochemical methods that have evolved over the last few decades. Treatment of Micropollutants in Water and Wastewater will also enable readers to make well informed choices through providing an understanding of why and how micropollutants must be removed from water sources, and what are the most appropriate and available techniques for providing a cost and technologically effective and sustainable solutions for reaching the goal of micropollutant-free water and wastewater. The book will be suitable for water and wastewater professionals as well for students and researchers in civil engineering, environmental engineering and process engineering fields.
Download or read book Handbook of Flotation Reagents Chemistry Theory and Practice written by Srdjan M. Bulatovic and published by Elsevier. This book was released on 2007-02-19 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Flotation Reagents: Chemistry, Theory and Practice is a condensed form of the fundamental knowledge of chemical reagents commonly used in flotation and is addressed to the researchers and plant metallurgists who employ these reagents. Consisting of three distinct parts: 1) provides detailed description of the chemistry used in mineral processing industry; 2) describes theoretical aspects of the action of flotation reagents3) provides information on the use of reagents in over 100 operating plants treating Cu, Cu/Zn, Cu/Pb, Zn, Pb/Zn/Ag, Cu/Ni and Ni ores.* Looks at the theoretical aspects of flotation reagents* Examines the practical aspects of using chemical reagents in operating plants* Provides guidelines for researchers and engineers involved in process design and development
Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2005-03-11 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.
Download or read book Drinking Water and Health written by National Research Council and published by National Academies Press. This book was released on 1977-01-01 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most recent volume in the Drinking Water and Health series contains the results of a two-part study on the toxicity of drinking water contaminants. The first part examines current practices in risk assessment, identifies new noncancerous toxic responses to chemicals found in drinking water, and discusses the use of pharmacokinetic data to estimate the delivered dose and response. The second part of the book provides risk assessments for 14 specific compounds, 9 presented here for the first time.
Download or read book Drinking Water Quality written by N. F. Gray and published by Cambridge University Press. This book was released on 2008-04-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive review of the problems associated with the supply of drinking water in the developed world. Since the first edition of this book was published, water companies and regulators have been presented with numerous new challenges - global warming has seriously affected water supplies and water quality; advances in chemical and microbial analysis have revealed many new contaminants in water that were previously undetectable; and recent terrorist attacks have demonstrated how vulnerable water supplies are to contamination or disruption. This new edition includes an overview of the current and emerging problems, with potential solutions. It has been completely updated, and includes the WHO Revised Drinking Water Guidelines. An ideal textbook for courses in environmental science, hydrology, environmental health and environmental engineering; it also provides an authoritative reference for practitioners and professionals in the water supply industry.
Download or read book Materials Handbook written by John A. Vaccari and published by McGraw Hill Professional. This book was released on 2002-07-09 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Materials Handbook is an encyclopedic, A-to-Z organization of all types of materials, featuring their key performance properties, principal characteristics and applications in product design. Materials include ferrous and nonferrous metals, plastics, elastomers, ceramics, woods, composites, chemicals, minerals, textiles, fuels, foodstuffs and natural plant and animal substances --more than 13,000 in all. Properties are expressed in both U.S. customary and metric units and a thorough index eases finding details on each and every material. Introduced in 1929 and often known simply as "Brady's," this comprehensive, one-volume, 1244 page encyclopedia of materials is intended for executives, managers, supervisors, engineers, and technicians, in engineering, manufacturing, marketing, purchasing and sales as well as educators and students. Of the dozens of families of materials updated in the 15th Edition, the most extensive additions pertain to adhesives, activated carbon, aluminides, aluminum alloys, catalysts, ceramics, composites, fullerences, heat-transfer fluids, nanophase materials, nickel alloys, olefins, silicon nitride, stainless steels, thermoplastic elastomers, titanium alloys, tungsten alloys, valve alloys and welding and hard-facing alloys. Also widely updated are acrylics, brazing alloys, chelants, biodegradable plastics, molybdenum alloys, plastic alloys, recyclate plastics, superalloys, supercritical fluids and tool steels. New classes of materials added include aliphatic polyketones, carburizing secondary-hardening steels and polyarylene ether benzimidazoles. Carcinogens and materials likely to be cancer-causing in humans are listed for the first time.
Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.
Download or read book Mineral Processing and the Environment written by G.P. Gallios and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral processing technologies have been used for decades to protect the environment and many examples of such applications are given here. The book covers four major subject areas: fundamentals; environmental pollution and its prevention; separation processes; and innovative techniques. Audience: Scientists, engineers and technologists conducting both applied and basic research into the different environmental aspects of mineral processing.
