Download or read book Mechanics and Physics of Bubbles in Liquids written by Leen van Wijngaarden and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: A IUTAM (International Union of Theoretical and Applied Mechanics) Sympo sium 'Mechanics and Physics of Bubbles in Liquids' was held at Pasadena, Calif., USA from 15 through 19 June 1981. The present volume contains the printed version of nearly all papers read at the Symposium. The study of the behaviour of bubbles in liquids was originally stimu lated by problems in cavitation and in boiling ofliquids. Today research is initiated by problems in many other fields as well. In this respect a growing interest from the side of biomechanics may be mentioned. Ordering of the papers could be done either according to the various mechanical and physical aspects of the subject or according to the fields of application. The presentaton at the Symposium contained a bit of both; there was a session on physico-chemical aspects for example and also a session on biological applications. The subdivision in this volume follows roughly the sessions in the Symposium. Most of them start with a paper of a survey nature, reporting progress made in recent years. Here, as in other fields of engineering science, one notes the important part played by experimental techniques and by numerical analysis.
Download or read book Bubble Systems written by Alexander A. Avdeev and published by Springer. This book was released on 2016-04-29 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a systematic analysis of bubble system mathematics, using the mechanics of two-phase systems in non-equilibrium as the scope of analysis. The author introduces the thermodynamic foundations of bubble systems, ranging from the fundamental starting points to current research challenges. This book addresses a range of topics, including description methods of multi-phase systems, boundary and initial conditions as well as coupling requirements at the phase boundary. Moreover, it presents a detailed study of the basic problems of bubble dynamics in a liquid mass: growth (dynamically and thermally controlled), collapse, bubble pulsations, bubble rise and breakup. Special emphasis is placed on bubble dynamics in turbulent flows. The analysis results are used to write integral equations governing the rate of vapor generation (condensation) in non-equilibrium flows, thus creating a basis for solving a number of practical problems. This book is the first to present a comprehensive theory of boiling shock with applications to problems of critical discharge and flashing under the fast decompression conditions. Reynolds’ analogy was the key to solving a number of problems in subcooled forced-flow boiling, the theoretical results of which led to easy-to-use design formulas. This book is primarily aimed at graduate and post-graduate students specializing in hydrodynamics or heat and mass transfer, as well as research expert focused on two-phase flow. It will also serve as a comprehensive reference book for designers working in the field of power and aerospace technology.
Download or read book Bubble growth and drop sizes for slashing liquids written by Ralph Brown, J. Louis York and published by . This book was released on 1960 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by and published by . This book was released on 1961 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boiling Heat Transfer And Two Phase Flow written by L S Tong and published by Routledge. This book was released on 2018-05-04 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated, this graduate text describes the current state of boiling heat transfer and two-phase flow, in terms through which students can attain a consistent understanding. Prediction of real or potential boiling heat transfer behaviour, both in steady and transient states, is covered to aid engineering design of reliable and effective systems.
Download or read book The Nature of Liquid Film Evaporation During Nucleate Boiling written by Robert R. Sharp and published by . This book was released on 1964 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics Of Multiphase Media written by Robert Iskanderovich Nigmatulin and published by CRC Press. This book was released on 1990-09-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of a monograph on current knowledge of phenomena and the theory and analysis of multiphase systems, offering a systematic treatment of energy, mass and momentum exchange in multiphase systems along with other applications which include shock hardening of metals and boiling heat transfer.
Download or read book Flow and Heat or Mass Transfer in the Chemical Process Industry written by Dimitrios V. Papavassiliou and published by MDPI. This book was released on 2018-09-28 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Flow and Heat or Mass Transfer in the Chemical Process Industry" that was published in Fluids
Download or read book Natural Convection Heat Transfer in Boiling of Metals written by V. I. Subbotin and published by . This book was released on 1971 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Fluid Dynamics written by Richard W. Johnson and published by CRC Press. This book was released on 2016-04-06 with total page 1544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Fluid Dynamics offers balanced coverage of the three traditional areas of fluid dynamics—theoretical, computational, and experimental—complete with valuable appendices presenting the mathematics of fluid dynamics, tables of dimensionless numbers, and tables of the properties of gases and vapors. Each chapter introduces a different fluid dynamics topic, discusses the pertinent issues, outlines proven techniques for addressing those issues, and supplies useful references for further research. Covering all major aspects of classical and modern fluid dynamics, this fully updated Second Edition: Reflects the latest fluid dynamics research and engineering applications Includes new sections on emerging fields, most notably micro- and nanofluidics Surveys the range of numerical and computational methods used in fluid dynamics analysis and design Expands the scope of a number of contemporary topics by incorporating new experimental methods, more numerical approaches, and additional areas for the application of fluid dynamics Handbook of Fluid Dynamics, Second Edition provides an indispensable resource for professionals entering the field of fluid dynamics. The book also enables experts specialized in areas outside fluid dynamics to become familiar with the field.
Download or read book Initiation of Cooling Due to Bubble Growth on a Heating Surface written by Robert C. Hendricks and published by . This book was released on 1964 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non equilibrium Evaporation and Condensation Processes written by Yuri B. Zudin and published by Springer Nature. This book was released on 2021-02-27 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This present book is concerned with analytical approaches to statement and solution of problems of non-equilibrium evaporation and condensation. From analytical solutions, one is capable to understand and represent in a transparent form the principal laws, especially in the study of a new phenomenon or a process. This is why analytical methods are always employed on the first stage of mathematical modeling. Analytical solutions are also used as test models for validation of results numerical solutions. Non-equilibrium evaporation and condensation processes play an important role in a number of fundamental and applied problems: laser methods for processing of materials, depressurization of the protection cover of nuclear propulsion units, solar radiation on a comet surface, explosive boiling of superheated liquid, thermodynamic principles of superfluid helium. Analytical relations provide an adequate description of the essence of a physical phenomenon.
Download or read book Cavitation and Bubble Dynamics written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2014 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation and Bubble Dynamics deals with fundamental physical processes of bubble dynamics and cavitation for graduate students and researchers.
Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Butterworth-Heinemann. This book was released on 2013-10-25 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers with minichannel and microchannel flow passages are becoming increasingly popular due to their ability to remove large heat fluxes under single-phase and two-phase applications. Heat Transfer and Fluid Flow in Minichannels and Microchannels methodically covers gas, liquid, and electrokinetic flows, as well as flow boiling and condensation, in minichannel and microchannel applications. Examining biomedical applications as well, the book is an ideal reference for anyone involved in the design processes of microchannel flow passages in a heat exchanger. - Each chapter is accompanied by a real-life case study - New edition of the first book that solely deals with heat and fluid flow in minichannels and microchannels - Presents findings that are directly useful to designers; researchers can use the information in developing new models or identifying research needs
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics and Physics of Bubbles in Liquids written by Leen van Wijngaarden and published by Springer Science & Business Media. This book was released on 1982-03-31 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: A IUTAM (International Union of Theoretical and Applied Mechanics) Sympo sium 'Mechanics and Physics of Bubbles in Liquids' was held at Pasadena, Calif., USA from 15 through 19 June 1981. The present volume contains the printed version of nearly all papers read at the Symposium. The study of the behaviour of bubbles in liquids was originally stimu lated by problems in cavitation and in boiling ofliquids. Today research is initiated by problems in many other fields as well. In this respect a growing interest from the side of biomechanics may be mentioned. Ordering of the papers could be done either according to the various mechanical and physical aspects of the subject or according to the fields of application. The presentaton at the Symposium contained a bit of both; there was a session on physico-chemical aspects for example and also a session on biological applications. The subdivision in this volume follows roughly the sessions in the Symposium. Most of them start with a paper of a survey nature, reporting progress made in recent years. Here, as in other fields of engineering science, one notes the important part played by experimental techniques and by numerical analysis.
Download or read book Advances in Chemical Engineering written by and published by Academic Press. This book was released on 1966-01-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Engineering
