Download or read book The Production of Paraffin and Paraffin Oils written by R. Henry Brunton and published by . This book was released on 1881 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wax Deposition written by Zhenyu Huang and published by CRC Press. This book was released on 2016-03-09 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wax Deposition: Experimental Characterizations, Theoretical Modeling, and Field Practices covers the entire spectrum of knowledge on wax deposition. The book delivers a detailed description of the thermodynamic and transport theories for wax deposition modeling as well as a comprehensive review of laboratory testing for the establishment of appropr
Download or read book Paraffin written by Fathi Samir Soliman and published by BoD – Books on Demand. This book was released on 2020-09-09 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paraffin waxes make up the majority of commercial waxes. Waxes are characterized by the carbon number, hardness, crystal shape, composition, and molecular weight. These characteristics determine the condition of separating the wax. Paraffin wax is widely used in different industries such as ink, paper, cosmetics, ceramics using powder injection molding and energy storage as phase change materials. Consumption of wax products has increased in the world; especially for food, pharmaceutical products, cosmetics, as well as specialty products. The increase of profitability of wax production will lie in the improvement of blending and modification techniques for macro and micro-crystalline waxes used as the base materials.
Download or read book Handbook of Petroleum Product Analysis written by James G. Speight and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the reader to the production of the products in arefinery • Introduces the reader to the types of test methodsapplied to petroleum products, including the need forspecifications • Provides detailed explanations for accuratelyanalyzing and characterizing modern petroleum products • Rewritten to include new and evolving testmethods • Updates on the evolving test methods and new testmethods as well as the various environmental regulations arepresented
Download or read book Paraffin and Congealing oil Problems written by Carl Ernest Reistle and published by . This book was released on 1932 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paraffins written by F. Asinger and published by Elsevier. This book was released on 2016-03-05 with total page 923 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paraffins: Chemistry and Technology deals primarily with fundamentals of those methods and processes for the manufacture and chemical treatment of the paraffinic hydrocarbons. The present book, the first edition of which was published by the Akademie-Verlag GmbH, Berlin, in 1956, and an unchanged reprint of which of the first edition was necessary in 1959, has been revised, in 1962, for translation into English. The book begins with a discussion of the production and manufacture of the paraffinic hydrocarbons. Separate chapters then cover the catalytic hydrogenation of carbon monoxide by means of the Fischer-Tropsch synthesis; the chlorination, sulfochlorination, and oxidation the paraffins along with the corresponding products; and the direct nitration of the paraffinic hydrocarbons. Subsequent chapters deal with the sulfoxidation and other substitution reactions of the paraffinic hydrocarbons and isomerization of the paraffinic hydrocarbons. The book is directed primarily to the chemist involved in research and development. It will also give the advanced student a picture of the many-sided possibilities of the use of the paraffinic hydrocarbons, which were long regarded as extraordinarily unreactive.
Download or read book Paraffin Products written by G. Mózes and published by Elsevier. This book was released on 1983-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paraffin Products
Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. It reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance. Where known, it also details the environmental aspects of the chemicals discussed and their success in the field.
Download or read book Ultrasonic Techniques for Fluids Characterization written by Malcolm J.W. Povey and published by Academic Press. This book was released on 1997-07-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive and practical guide to the use of ultrasonic techniques for the characterization of fluids. Focusing on ultrasonic velocimetry, the author covers the basic topics and techniques necessaryfor successful ultrasound measurements on emulsions, dispersions, multiphase media, and viscoelastic/viscoplastic materials. Advanced techniques such as scattering, particle sizing, and automation are also presented. As a handbook for industrial and scientific use, Ultrasonic Techniques for Fluids Characterization is an indispensable guide to chemists and chemical engineers using ultrasound for research or process monitoring in the chemical, food processing, pharmaceutical, cosmetic, biotechnology,and fuels industries. Appeals to anyone using ultrasound to study fluids Provides the first detailed description of the ultrasound profiling technique for dispersions Describes new techniques for measuring phase transitions and nucleation, such as water/ice and oil/fat Presents the latest ultrasound techniques for particle sizing in concentrated systems Explains new techniques for compressibility measurements in dispersions and fluids, including cell suspensions Contains a detailed treatment of ultrasound scattering theory Written by one of the leading researchers in the field Includes over 350 references to the primary literature
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essential Rubber Formulary Formulas for Practitioners written by Chellappa Chandrasekaran and published by William Andrew. This book was released on 2007-03-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author, a seasoned rubber technologist of four decades, provides more than 180 essential rubber formularies, some of which have never been published, that are used by practitioners the world over on a frequent basis. A special feature of the formulations is that they are designed for factory scale applications. The opening chapter of this indispensable book gives practical information on compounding techniques, coloring, ingredients, as well as a whole section on typical rubber testing methods. The book concludes with appendices useful for the technologist that include seven conversion tables and three tables on scorching of rubber, specific gravity and volume cost, equivalent chemical names for trade names. Designing a rubber formula on the factory floor demands knowledge of the whole undertaking, such as the physical nature of ingredients, the interaction of additives and the base rubber during compounding and processing, as well as making sure that the finished product conforms to specification and requirements. This book provides all the necessary knowledge for practitioners and students alike.
Download or read book Destructive Distillation written by Edmund James Mills and published by . This book was released on 1892 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Nanoparticles written by Abdel Salam Hamdy Makhlouf and published by William Andrew. This book was released on 2018-08-09 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Nanoparticles: Classifications, Synthesis Methods, Properties and Characterization explores the nanoparticles and architecture of nanostructured materials being used today in a comprehensive, detailed manner. This book focuses primarily on the characterization, properties and synthesis of nanoscale materials, and is divided into three major parts. This is a valuable reference for materials scientists, and chemical and mechanical engineers working in R&D and academia, who want to learn more about how nanoparticles and nanomaterials are characterized and engineered. Part one covers nanoparticles formation, self-assembly in the architecture nanostructures, types and classifications of nanoparticles, and signature physical and chemical properties, toxicity and regulations. Part two presents different ways to form nanometer particles, including bottom-up and top-down approaches, the classical and non-classical theories of nanoparticles formation and self-assembly, surface functionalization and other surface treatments to allow practical use. Part three covers characterization of nanoparticles and nanostructured materials, including the determination of size and shape, in addition to atomic and electronic structures and other important properties. Includes new physical and chemical techniques for the synthesis of nanoparticles and architecture nanostructures Features an in-depth treatment of nanoparticles and nanostructures, including their characterization and chemical and physical properties Explores the unusual properties of materials that are developed by modifying their shape and composition and by manipulating the arrangement of atoms and molecules Explains important techniques for the synthesis, fabrication and the characterization of complex nano-architectures
Download or read book Flow Assurance Solids in Oil and Gas Production written by Jon Steinar Gudmundsson and published by CRC Press. This book was released on 2017-09-13 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precipitation and deposition of solids are a major challenge in the production of oil and gas. Flow assurance solids are formed because of unavoidable changes in temperature, pressure and composition of the oil-gas-water flowstream, from reservoir conditions to processing conditions. The advent of subsea production and the increased exploitation of heavy crudes have made flow assurance issues dominant in ensuring efficient and safe exploitation of hydrocarbon assets. Five troublesome flow assurance solids are described in the book: asphaltene, paraffin wax, natural gas hydrate, naphthenate and inorganic scale. These big-five solids are presented in stand-alone chapters. Each chapter is designed to be readable without clutter. Derivations of equations and descriptions of supporting details are given in several appendices. The book is intended for professional engineers and natural scientist working in E&P companies, engineering companies, service companies and specialized companies. An understanding of the big-five solids is required throughout the lifetime of oil and gas assets, from early development to abandonment. The technical, safety and environmental risks associated with deposition problems in near-wellbore formations, production tubing, wellhead equipment, flowlines and processing facilities, are relevant for decisions in the oil and gas industry and in outside regulatory and financial entities.
Download or read book Molecularly Imprinted Sensors written by Songjun Li and published by Elsevier. This book was released on 2012-07-30 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular imprinting is a rapidly growing field with wide-ranging applications, especially in the area of sensor development, where the process leads to improved sensitivity, reliability, stability, and reproducibility in sensing materials. Molecularly Imprinted Sensors in Analytical Chemistry addresses the most recent advances and challenges relating to molecularly imprinted polymer sensors, and is the only book to compile this information in a single source. From fundamentals to applications, this material will be valuable to researchers working in sensing technologies for pharmaceutical separation and chemical analysis, environmental monitoring and protection, defense and security, and healthcare. Provides a systematic introduction to the different types of MIP-based sensors and reviews the basic principles behind each type of sensor Includes state-of-the-art methodology supported by comparisons and discussions from leading experts in the field Covers all types of sensing modes (optical, electrochemical, thermal, acoustic, etc.), materials and platforms Appeals to a multidisciplinary audience of scientists and graduate students in a wide variety of fields, including chemistry, biology, biomedical science and engineering, and materials science and engineering
Download or read book Lubricant Base Oil and Wax Processing written by Avilino Sequeira and published by CRC Press. This book was released on 1994-08-09 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides state-of-the-art information on all processes currently used to manufacture lubricant base oils and waxes-offering practical, timesaving solutions for specific on-the-job problems. Furnishes helpful lists of conversion factors, construction cost data, and process licensors, as well as a glossary of essential petroleum processing terms.
