Download or read book The Product Consistency Test for the DWPF Wasteform written by and published by . This book was released on 1990 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: The preliminary specifications on the glass wasteform to be produced by the Defense Waste Processing Facility (DWPF) require extensive characterization of the glass product both before actual production begins and then during production. To aid in this characterization, a leach test was needed that was easily reproducible, could be performed remotely on highly radioactive samples, and could yield results rapidly. Several standard leach tests were examined with a variety of test configurations. Using existing tests as a starting point, the DWPF Product Consistency Test (PCT) was developed in which crushed glass samples are exposed to 90°C deionized water for seven days. Based on extensive testing, including a seven-laboratory round robin and confirmatory testing with radioactive samples, the PCT is very reproducible, yields reliable results rapidly, and can be performed in shielded cell facilities with radioactive samples.

Download or read book Product Consistency Test Round Robin Conducted by the Materials Characterization Center Summary Report written by and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Savannah River Laboratory (SRL) Product Consistency Test (PCT) was developed as a short duration leach test that could be used to evaluate the consistency of Defense Waste Processing Facility (DWPF) glass. The goals were to develop a test that would be sensitive to glass composition and homogeneity, rapid enough to support quality control of the production process, and easily conducted remotely to facilitate working with highly radioactive materials. The long-term SRL goal is to show that the PCT can be used to demonstrate that DWPF glass meets the elemental and radionuclide release requirements of the Waste Acceptance Preliminary Specifications (WAPS). The Materials Characterization Center (MCC) at Pacific Northwest Laboratory (PNL) was requested by SRL to conduct a multi-laboratory round robin to evaluate the effectiveness of the PCT methodology. 12 figs., 10 tabs.

Download or read book Development of an ASTM Standard Glass Durability Test the Product Consistency Test PCT for High Level Radioactive Waste Glass written by and published by . This book was released on 1994 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nation's first, and the world's largest, facility to immobilize high-level nuclear waste in durable borosilicate glass has started operation at the Savannah River Site (SRS) in Aiken, South Carolina. The product specifications on the glass wasteform produced in the Defense Waste Processing Facility (DWPF) required extensive characterization of the glass product before actual production began and for continued characterization during production. To aid in this characterization, a glass durability (leach) test was needed that was easily reproducible, could be performed remotely on highly radioactive samples, and could yield results rapidly. Several standard leach tests were examined with a variety of test configurations. Using existing tests as a starting point, the DWPF Product Consistency Test (PCT was developed in which crushed glass samples are exposed to 90 " 2°C deionized water for seven days. Based on extensive testing, including a seven-laboratory round robin and confirmatory testing with radioactive samples, the PCT is very reproducible, yields reliable results rapidly, and can be performed in shielded cell facilities with radioactive samples.

Download or read book Evaluation of Experimental Factors that Influence the Application and Discrimination Capability of the Product Consistency Test written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be fabricated in the Defense Waste Processing Facility (DWPF) where the glass will be poured into stainless steel canisters for eventual disposal in a geologic repository. In order to comply with the Waste Acceptance Preliminary Specifications (WAPS) the durability of the glass needs to be measured during production in order to demonstrate its long term stability and radionuclide release properties. A durability test, designated the Product Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely differing compositions. The PCT was determined to be very reproducible, yield reliable results rapidly, and be easily performed in shielded cell facilities with radioactive samples. In the study attached, Battelle Pacific Northwest Laboratory independently verified the optimum PCT test parameters for glasses of very similar composition. During this study the following four parameters were investigated: the test duration, necessity for leachate filtration, necessity for sample washing, and the optimum ratio of the sample surface area to leachant volume. 6 refs., 17 tabs.

Download or read book Radioactive Waste Management written by and published by . This book was released on 1981 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Glass as a Waste Form and Vitrification Technology written by National Research Council and published by National Academies Press. This book was released on 1997-03-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries XI written by Connie C. Herman and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains papers presented at the Ceramic/Glass Science and Technology for Nuclear and Environmental Industries symposium. Topics include nuclear and environmental technology applications in the ceramic industry; nuclear waste forms and fuels processing and technology - ceramic forms; nuclear waste forms processing and technology - steam reforming; panel discussion on nuclear waste forms durability, testing, and disposal status; nuclear waste forms and fuels processing and technology - glass forms; and advances in nuclear waste form testing and characterization methods.

Download or read book Waste Forms Technology and Performance written by National Research Council and published by National Academies Press. This book was released on 2011-09-05 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Energy's Office of Environmental Management (DOE-EM) is responsible for cleaning up radioactive waste and environmental contamination resulting from five decades of nuclear weapons production and testing. A major focus of this program involves the retrieval, processing, and immobilization of waste into stable, solid waste forms for disposal. Waste Forms Technology and Performance, a report requested by DOE-EM, examines requirements for waste form technology and performance in the cleanup program. The report provides information to DOE-EM to support improvements in methods for processing waste and selecting and fabricating waste forms. Waste Forms Technology and Performance places particular emphasis on processing technologies for high-level radioactive waste, DOE's most expensive and arguably most difficult cleanup challenge. The report's key messages are presented in ten findings and one recommendation.

Download or read book Radioactive Waste Management and Contaminated Site Clean Up written by William E Lee and published by Elsevier. This book was released on 2013-10-31 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioactive waste management and contaminated site clean-up reviews radioactive waste management processes, technologies, and international experiences. Part one explores the fundamentals of radioactive waste including sources, characterisation, and processing strategies. International safety standards, risk assessment of radioactive wastes and remediation of contaminated sites and irradiated nuclear fuel management are also reviewed. Part two highlights the current international situation across Africa, Asia, Europe, and North America. The experience in Japan, with a specific chapter on Fukushima, is also covered. Finally, part three explores the clean-up of sites contaminated by weapons programmes including the USA and former USSR. Radioactive waste management and contaminated site clean-up is a comprehensive resource for professionals, researchers, scientists and academics in radioactive waste management, governmental and other regulatory bodies and the nuclear power industry. Explores the fundamentals of radioactive waste including sources, characterisation, and processing strategies Reviews international safety standards, risk assessment of radioactive wastes and remediation of contaminated sites and irradiated nuclear fuel management Highlights the current international situation across Africa, Asia, Europe, and North America specifically including a chapter on the experience in Fukushima, Japan

Download or read book Vitrification Technologies for Treatment of Hazardous and Radioactive Waste written by and published by . This book was released on 1992 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Issues and Waste Management Technologies in the Materials and Nuclear Industries XII written by Alex Cozzi and published by John Wiley & Sons. This book was released on 2009-09-24 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents a special collection of articles from a select group of invited prominent scientists from academia, national laboratories and industry who presented their work at the symposia on Environmental and Energy Issues at the 2008 Materials Science and Technology (MS&T’08) conference held in Pittsburgh, PA. These articles represent a summary of the presentations focusing on topics in nuclear, environmental, and green engineering were held, including a discussion of Waste Glass Leach Testing and Modeling.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of the Defense Waste Processing Facility DWPF Environmental Assessment EA Glass Standard Reference Material Revision 1 written by and published by . This book was released on 1993 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste at the Savannah River Site (SRS) will be immobilized by vitrification in borosilicate glass. The glass will be produced and poured into stainless steel canisters in the Defense Waste Processing Facility (DWPF). Other waste form producers, such as West Valley Nuclear Services (WVNS) and the Hanford Waste Vitrification Project (HWVP), will also immobilize high-level radioactive waste in borosilicate glass. The canistered waste will be stored temporarily at each facility for eventual permanent disposal in a geologic repository. The Department of Energy has defined a set of requirements for the canistered waste forms, the Waste Acceptance Product Specifications (WAPS). The current Waste Acceptance Primary Specification (WAPS) 1.3, the product consistency specification, requires the waste form producers to demonstrate control of the consistency of the final waste form using a crushed glass durability test, the Product Consistency Test (PCI). In order to be acceptable, a waste glass must be more durable during PCT analysis than the waste glass identified in the DWPF Environmental Assessment (EA). In order to supply all the waste form producers with the same standard benchmark glass, 1000 pounds of the EA glass was fabricated. The chemical analyses and characterization of the benchmark EA glass are reported. This material is now available to act as a durability and/or redox Standard Reference Material (SRM) for all waste form producers.

Download or read book Characterization of the Defense Waste Processing Facility DWPF Environmental Assessment EA Glass Standard Reference Material Site Characterization written by and published by . This book was released on 1992 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste at the Savannah River Site (SRS) will be immobilized by vitrification in borosilicate glass. The glass will be produced and poured into stainless steel canisters in the Defense Waste Processing Facility (DWPF). Other waste form producers, such as West Valley Nuclear Services (WVNS) and the Hanford Waste Vitrification Project (HWVP), will also immobilize high-level radioactive waste in borosilicate glass. The canistered waste will be stored temporarily at each facility for eventual permanent disposal in a geologic repository. The Department of Energy has defined a set of requirements for the canistered waste forms, the Waste Acceptance Preliminary Specifications (WAPS). The current Waste Acceptance Preliminary Specification (WAPS) 1.3, the product consistency specification, requires the waste form producers to demonstrate control of the consistency of the final waste form using a crushed glass durability test, the Product Consistency Test (PCT). In order to be acceptable, a waste glass must be more durable during PCT analysis than the waste glass identified in the DWPF Envirorunental Assessment (EA). In order to supply all the waste form producers with the same standard benchmark glass, 1000 pounds of the EA glass was fabricated. The chemical analyses and characterization of the benchmark EA glass are reported. This material is now available to act as a durability, analytic, and/or redox Standard Reference Material (SRM) for all waste form producers.

Download or read book Ceramic Materials for Energy Applications II Volume 33 Issue 9 written by Kevin M. Fox and published by John Wiley & Sons. This book was released on 2012-11-29 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dedicated to the innovative design and use of ceramic materials for energy applications, this issue brings readers up to date with some of the most important research discoveries and new and emerging applications in the field. Contributions come from the proceedings of three symposia, as well as the European Union–USA Engineering Ceramics Summit. The three symposia are: Ceramics for Electric Energy Generation, Storage, and Distribution; Advanced Ceramics and Composites for Nuclear and Fusion Applications; and Advanced Materials and Technologies for Rechargeable Batteries. An abundance of charts, tables, and illustrations are included throughout.

Download or read book Characterization of the Defense Waste Processing Facility DWPF Environmental Assessment EA Glass Standard Reference Material written by and published by . This book was released on 1992 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste at the Savannah River Site (SRS) will be immobilized by vitrification in borosilicate glass. The glass will be produced and poured into stainless steel canisters in the Defense Waste Processing Facility (DWPF). Other waste form producers, such as West Valley Nuclear Services (WVNS) and the Hanford Waste Vitrification Project (HWVP), will also immobilize high-level radioactive waste in borosilicate glass. The canistered waste will be stored temporarily at each facility for eventual permanent disposal in a geologic repository. The Department of Energy has defined a set of requirements for the canistered waste forms, the Waste Acceptance Preliminary Specifications (WAPS). The current Waste Acceptance Preliminary Specification (WAPS) 1.3, the product consistency specification, requires the waste form producers to demonstrate control of the consistency of the final waste form using a crushed glass durability test, the Product Consistency Test (PCT). In order to be acceptable, a waste glass must be more durable during PCT analysis than the waste glass identified in the DWPF Envirorunental Assessment (EA). In order to supply all the waste form producers with the same standard benchmark glass, 1000 pounds of the EA glass was fabricated. The chemical analyses and characterization of the benchmark EA glass are reported. This material is now available to act as a durability, analytic, and/or redox Standard Reference Material (SRM) for all waste form producers.

Download or read book Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries VII written by Gary L. Smith and published by John Wiley & Sons. This book was released on 2012-03-28 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composed from two symposia conducted at the 2001 Annual Meeting of The American Ceramic Society, this new volume details the advances in the state of knowledge in nuclear and waste materials science and technology. Highlighted are areas of rapid change such as in the application, development, and testing of ceramics and glasses in the nuclear and waste industries. As companies begin to focus on ¿green ceramics¿ and the manufacturing of environmentally friendly products, the development of innovative processing approaches and novel environmental treatment technologies soon follows. These are being developed to address more stringent regulations and to obtain an improved scientific understanding of the industrial processes and treatment technologies. This seventh volume in the series addresses current nuclear and environmental problems and provides solutions for them. It is an excellent resource for researchers and scientists involved in the ceramic and nuclear industries. roceedings of the symposium held at the 103rd Annual Meeting of The American Ceramic Society, April 22-25, 2001, in Indiana; Ceramic Transactions, Volume 132.