Download or read book The Processing and Recovery of the Platinum group Elements written by Nicholas Mark Lindsay and published by . This book was released on 1988 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrometallurgy 94 written by Institution of Mining & Metallurgy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrometallurgy '94 contains the 78 papers that were presented at the international symposium organized by the Institution of Mining and Metallurgy and the Society of Chemical Industry and held in Cambridge, England, in July 1994. In the papers specific attention is paid to the concept of sustainable development and the associated ideas of cleaner technology, recycling and waste minimization that have particular relevance to the extractiona nd processing of metals and other mineral products. The papers, by authors from 30 contries, are grouped under the headings: Hydrometallurgy and Sustainable Development; Materials Production and the Environment; Fundamentals; Leaching; Bioprocessing; Gold Solution Purification; Effluent Treatment; Processes; and Recycling.
Download or read book High temperature Cyanide Leaching of Platinum group Metals from Automobile Catalysts process Development Unit written by Robert J. Kuczynski and published by . This book was released on 1992 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author’s previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book Reviews extraction of multiple metals from the same tropical or arctic ore Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Proceedings of the Platinum Group Metals Seminar 1985 written by E. D. Zysk and published by . This book was released on 1986 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Proceedings of the Platinum Group Metals Seminar 1985 held October 6-9, 1985 in Washington, D.C., USA."--Verso of t.p.
Download or read book Element Recovery and Sustainability written by Andrew Hunt and published by Royal Society of Chemistry. This book was released on 2013-07-18 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increased consumption of electronic equipment has brought with it a greater demand for rare earth elements and metals. Adding to this is the growth in low carbon technologies such as hybrid fuel vehicles. It is predicted that the global supply of rare earth elements could soon be exhausted. A sustainable approach to the use and recovery of rare earth elements is needed, and this book addresses the political, economic and research agendas concerning them. The problem is discussed thoroughly and a multi-disciplinary team of authors from the chemistry, engineering and biotechnology sectors presents a range of solutions, from traditional metallurgical methods to innovations in biotechnology. Case studies add value to the theory presented, and indirect targets for recovery, such as municipal waste and combustion ash are considered. This book will be essential reading for researchers in academia and industry tackling sustainable element recovery, as well as postgraduate students in chemistry, engineering and biotechnology. Environmental scientists and policy makers will also benefit from reading about potential benefits of recovery from waste streams.
Download or read book Pt Platinum written by Gary J.K. Acres and published by Springer. This book was released on 1985-12-30 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like most supplement volumes of the platinum-group metal series,Platinum Suppl. Vol. A 1 has been written by an international team of specialists. It comprises technological data of all six platinum-group metals and their technically relevant alloys and compounds. The volume starts with a review on the recovery of the platinum-group metals (23 pages); the next 42 pages are devoted to processes for separating and refining the PGM in order to obtain metals of high purity. The electrodeposition of the PGM and their alloys is treated on 26 pages.The by far most extensive section deals with PGMand their alloys and compounds in catalysis. After a historicalsurvey and alist of important reviewson PGMcatalysis,the catalytic properties of the metals are treated in a general way, followed by unsupported metals and alloys including preparation of catalysts and their reactions in various industrial processes. The role of supported metals and alloys is described in asimilar manner. This isfollowed byan extensive description of the preparation and the reactions of PGM compounds with various nonmetals and their catalytically active role in a number of industrial processes (226 pages). The last chapter (21 pages) is a compilation of data on the medical use of cytostatic platinum compounds. Gelnhausen, December 1985 Kurt Swars IX Table of Contents Page Technology ofthe Platinum-Group Metals. ............................... 1 1 Review on the Recovery ofthe Platinum-Group Metals . 1.1 Historical Perspective , , , . Period of Discovery, 1750 to 1820 , , . First Industrial Period 1820 to 1900 , , , .
Download or read book Amagnite Process for the Recovery of Platinum written by Platinum Metals Co. (Philadelphia) and published by . This book was released on 1918* with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rare Metal Technology 2020 written by Gisele Azimi and published by Springer Nature. This book was released on 2020-01-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Rare metals include strategic metals that are in increasing demand and subject to supply risks. Metals represented include neodymium, dysprosium, scandium and others; platinum group metals including platinum, palladium, iridium, and others; battery related metals including lithium, cobalt, nickel, and aluminum; electronics-related materials including copper and gold; and refectory metals including titanium, niobium, zirconium, and hafnium. Other critical materials such as gallium, germanium, indium and silicon are also included. Papers cover various processing techniques, including but not limited to hydrometallurgy (solvent extraction, ion exchange, precipitation, and crystallization), electrometallurgy (electrorefining and electrowinning), pyrometallurgy, and aeriometallurgy (supercritical fluid extraction). Contributions are focused on primary production as well as secondary production through urban mining and recycling to enable a circular economy. A useful resource for all involved in commodity metal production, irrespective of the major metal Provides knowledge of cross-application among industries Extraction and processing of rare metals that are the main building block of many emerging critical technologies have been receiving significant attention in recent years. The technologies that rely on critical metals are prominent worldwide, and finding a way to extract and supply them effectively is highly desirable and beneficial.
Download or read book Rare Metal Technology 2017 written by Hojong Kim and published by Springer. This book was released on 2017-02-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Topics include the extraction and processing of elements like antimony, arsenic, gold, indium, palladium, platinum, rare earth metals including yttrium and neodymium, titanium, tungsten, and vanadium. Rare processing techniques are covered, including direct extraction processes for rare-earth recovery, biosorption of precious metals, fluorination behavior of uranium and zirconium mixture of fuel debris treatment, and recovery of valuable components of commodity metals such as zinc, nickel, and metals from slag.
Download or read book Resource Recovery and Recycling from Metallurgical Wastes written by S.R. Ramachandra Rao and published by Elsevier. This book was released on 2011-08-29 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource recovery and recycling from millions of tons of wastes produced from industrial activities is a continuing challenge for environmental engineers and researchers. Demand for conservation of resources, reduction in the quantity of waste and sustainable development with environmental control has been growing in every part of the world. Resource Recovery and Recycling from Metallurgical Wastes brings together the currently used techniques of waste processing and recycling, their applications with practical examples and economic potentials of the processes. Emphasis is on resource recovery by appropriate treatment and techniques. Material on the subject is scatterend in waste management and environmental related journals, conference volumes and government departmental technical reports. This work serves as a source book of information and as an educational technical reference for practicing scientists and engineers, as well as for students. Describes the currently used and potential techniques for the recovery of valuable resources from mineral and metallurgical wastes Discusses the applications to specific kinds of wastes with examples from current practices, as well as eht economics of the processes Presents recent and emerging technologies of potentials in metal recycling and by-product utilization
Download or read book The Recovery of Platinum group Metals and Gold from Sources Containing Same written by and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A process for the recovery of platinum group metals (PGMs) and gold from source materials having a high chromium content, low nickel and copper contents, and generally a low sulphur content, is described. The source material is formed into a feed mixture (pelletized if necessary) containing 2 to 30 per cent chromium; 5 to 15 per cent iron, slagging agents providing a basicity of from 0,4 to 1,5; and carbon or silicon reductants sufficient to reduce the greater proportion of the iron oxides present and some of the chromium present. The feed mixture is smelted optionally in a plasma-arc furnace at a minimum temperature of 1400 degrees C, and preferably above 1500 degrees C, to form a collector metal phase of Fe-Cr-Ni-Si-C which is crushed or granulated and the material is treated hydrometallurgically to recover collected PGMs and gold.
Download or read book Noble and Precious Metals written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2018-07-04 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of copper, silver, gold and platinum in jewelry as a measure of wealth is well known. This book contains 19 chapters written by international authors on other uses and applications of noble and precious metals (copper, silver, gold, platinum, palladium, iridium, osmium, rhodium, ruthenium, and rhenium). The topics covered include surface-enhanced Raman scattering, quantum dots, synthesis and properties of nanostructures, and its applications in the diverse fields such as high-tech engineering, nanotechnology, catalysis, and biomedical applications. The basis for these applications is their high-free electron concentrations combined with high-temperature stability and corrosion resistance and methods developed for synthesizing nanostructures. Recent developments in all these areas with up-to-date references are emphasized.
Download or read book Pt Platinum written by Gary J.K. Acres and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like most supplement volumes of the platinum-group metal series,Platinum Suppl. Vol. A 1 has been written by an international team of specialists. It comprises technological data of all six platinum-group metals and their technically relevant alloys and compounds. The volume starts with a review on the recovery of the platinum-group metals (23 pages); the next 42 pages are devoted to processes for separating and refining the PGM in order to obtain metals of high purity. The electrodeposition of the PGM and their alloys is treated on 26 pages.The by far most extensive section deals with PGMand their alloys and compounds in catalysis. After a historicalsurvey and alist of important reviewson PGMcatalysis,the catalytic properties of the metals are treated in a general way, followed by unsupported metals and alloys including preparation of catalysts and their reactions in various industrial processes. The role of supported metals and alloys is described in asimilar manner. This isfollowed byan extensive description of the preparation and the reactions of PGM compounds with various nonmetals and their catalytically active role in a number of industrial processes (226 pages). The last chapter (21 pages) is a compilation of data on the medical use of cytostatic platinum compounds. Gelnhausen, December 1985 Kurt Swars IX Table of Contents Page Technology ofthe Platinum-Group Metals. ............................... 1 1 Review on the Recovery ofthe Platinum-Group Metals . 1.1 Historical Perspective , , , . Period of Discovery, 1750 to 1820 , , . First Industrial Period 1820 to 1900 , , , .
Download or read book Critical Mineral Resources of the United States written by K. J. Schulz and published by Geological Survey. This book was released on 2017 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the importance and dependence of specific mineral commodities increase, so does concern about their supply. The United States is currently 100 percent reliant on foreign sources for 20 mineral commodities and imports the majority of its supply of more than 50 mineral commodities. Mineral commodities that have important uses and face potential supply disruption are critical to American economic and national security. However, a mineral commodity's importance and the nature of its supply chain can change with time; a mineral commodity that may not have been considered critical 25 years ago may be critical today, and one considered critical today may not be so in the future. The U.S. Geological Survey has produced this volume to describe a select group of mineral commodities currently critical to our economy and security. For each mineral commodity covered, the authors provide a comprehensive look at (1) the commodity's use; (2) the geology and global distribution of the mineral deposit types that account for the present and possible future supply of the commodity; (3) the current status of production, reserves, and resources in the United States and globally; and (4) environmental considerations related to the commodity's production from different types of mineral deposits. The volume describes U.S. critical mineral resources in a global context, for no country can be self-sufficient for all its mineral commodity needs, and the United States will always rely on global mineral commodity supply chains. This volume provides the scientific understanding of critical mineral resources required for informed decisionmaking by those responsible for ensuring that the United States has a secure and sustainable supply of mineral commodities.
Download or read book The Carcinogenicity of Metals written by Alan B. G. Lansdown and published by Royal Society of Chemistry. This book was released on 2013-10-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book re-evaluates epidemiological and occupational health studies, experimental studies in animals and in vitro experiments relating to the toxicity of 27 metal and metalloid elements for which evidence of carcinogenicity has been presented. Human carcinogenic risk is substantiated in relation to arsenic, beryllium, thorium, chromium, radioactive elements, probably lead, and some nickel and cobalt compounds, and respirable silica particles, but the carcinogenicity of iron, aluminium, titanium, tungsten, antimony, bismuth, mercury, precious metals, and certain related compounds in humans is unresolved. The toxicity and carcinogenicity of each element is specific but correlates poorly with its position in the Periodic Table. Carcinogenicity differs according to the valency of the ion and its ability to interact with and penetrate membranes in target cells and to bind, denature or induce mutations by genotoxic or epigenetic mechanisms. This important text comprehensively examines each of the elements providing detailed information on the carcinogenicity and toxicity and detailing the most up-to-date research in this area. The book is an essential tool for toxicologists, medicinal and biochemists, and environmental scientists working in both industry and academia.
Download or read book Platinum group Elements written by Louis J. Cabri and published by Published for the Geology division of CIM by the Canadian Institute of Mining and Metallurgy. This book was released on 1981 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
