Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Download or read book Pressuremeter Testing written by R. J. Mair and published by Elsevier. This book was released on 2013-10-22 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.

Download or read book Cone Penetration Testing in Geotechnical Practice written by T. Lunne and published by CRC Press. This book was released on 2002-09-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on the specification, performance, use and interpretation of the Electric Cone Penetration Test (CPU), and in particular the Cone Penetration Test with pore pressure measurement (CPTU) commonly referred to as the "piezocone test".

Download or read book Unsaturated Soil Mechanics in Geotechnical Practice written by Geoffrey E Blight and published by CRC Press. This book was released on 2013-07-11 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are other books on unsaturated soil mechanics, but this book is different. Unsaturated soil mechanics is only one aspect of a continuous range of soil mechanics studies that extends from the rheology of high water content soil slurries to the mechanics of soft soils, to stiff saturated soils, to unsaturated soils, and, at the far end of the r

Download or read book Pressuremeters in Geotechnical Design written by B.G. Clarke and published by CRC Press. This book was released on 1994-10-20 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of pressuremeters in predicting in situ soil properties is increasing as the technique becomes established as a reliable method of site investigation. This book provides a thorough review of the topic and its use in site investigation.

Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

Download or read book From Research to Practice in Geotechnical Engineering written by James E. Laier and published by ASCE Publications. This book was released on 2008 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Research to Practice in Geotechnical Engineering, GSP 180, honors Dr. John H. Schmertmann, Professor Emeritus and P.E., for his contributions to civil engineering. It begins with his biography, a list of his students and writings, followed by reprints of his selection of 16 representative papers from his career. Twenty-eight new, mostly invited papers follow on a great variety of subjects, including: the installation and testing of piles; pile-structure interaction; liquefaction and its mitigation; case histories of settlement and landslide mitigation and capping a superfund landfill; and computer modeling. The authors include six members of the National Academy of Engineering. This GSP concludes with a paper by one of these, Dr. Schmertmann, which itself concludes with a suggestion for improving your technical writing. Everyone working in the geotechnical profession will find something interesting and useful herein.

Download or read book In Situ Tests in Geotechnical Engineering written by Jacques Monnet and published by John Wiley & Sons. This book was released on 2015-12-07 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-situ tests that are performed in geotechnics to identify and characterize the soil. These measurements are then used to size the Civil Engineering works This book is intended for engineers, students and geotechnical researchers. It provides useful information for use and optimal use of in-situ tests to achieve a better book adaptation of civil engineering on the ground

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book The Pressuremeter and Its New Avenues written by Gerard Ballivy and published by CRC Press. This book was released on 1995-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter testing activities are of great interest for scientists and engineers concerned with the mechanical behaviour of civil engineering materials. The proceedings include the first Menard Lecture presented by Professor Branko Ladanyi and 57 technical papers from 16 countries. They are related to the application of pressuremeter testing to granular and alluvial soils, clay, rock, concrete and permafrost, and geotechnical design. It also includes a session on technological developments in the design, fabrication and installation of pressuremeters.

Download or read book In Situ Testing in Geomechanics written by Fernando Schnaid and published by CRC Press. This book was released on 2009-01-13 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demanding a thorough knowledge of material behaviour and numerical modelling, site characterisation and in situ test interpretation are no longer just basic empirical recommendations. Giving a critical appraisal of the understanding and assessment of the stress-strain-time and strength characteristics of geomaterials, this book explores new interpretation methods for measuring properties of a variety of soil formations. Emphasis is given to the five most commonly encountered in situ test techniques: standard penetration tests cone penetration tests vane test pressuremeter tests dilatometer tests Ideal for practising engineers in the fields of geomechanics and environmental engineering, this book solves numerous common problems in site characterisation. It is also a valuable companion for students coming to the end of their engineering courses and looking to work in this sector.

Download or read book Pressuremeters written by British Geotechnical Society and published by Thomas Telford. This book was released on 1990 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology, data interpretation and applications of pressure meters have progressed rapidly. Covering the design and construction of pressure meters, this text also discusses their uses, including developments in the field.

Download or read book Cavity Expansion Methods in Geomechanics written by Hai-Sui Yu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavity expansion theory is a simple theory that has found many applications in geotechnical engineering. In particular, it has been used widely to analyse problems relating to deep foundations, in-situ testing, underground excavation and tunnelling, and wellbore instability. Although much research has been carried out in this field, all the major findings are reported in the form of reports and articles published in technical journals and conference proceedings. To facilitate applications and further development of cavity expansion theory, there is a need for the geotechnical community to have a single volume presentation of cavity expansion theory and its applications in solid and rock mechanics. This book is the first attempt to summarize and present, in one volume, the major developments achieved to date in the field of cavity expansion theory and its applications in geomechanics. Audience: Although it is intended primarily as a reference book for civil, mining, and petroleum engineers who are interested in cavity expansion methods, the solutions presented in the book will also be of interest to students and researchers in the fields of applied mechanics and mechanical engineering.

Download or read book The Pressuremeter and Foundation Engineering written by F. Baguelin and published by . This book was released on 1978 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book In Situ Testing Methods in Geotechnical Engineering written by Alan J. Lutenegger and published by CRC Press. This book was released on 2021-05-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Situ Testing Methods in Geotechnical Engineering covers the field of applied geotechnical engineering related to the use of in situ testing of soils to determine soil properties and parameters for geotechnical design. It provides an overview of the practical aspects of the most routine and common test methods, as well as test methods that engineers may wish to include on specific projects. It is suited for a graduate-level course on field testing of soils and will also aid practicing engineers. Test procedures for determining in situ lateral stress, strength, and stiffness properties of soils are examined, as is the determination of stress history and rate of consolidation. Readers will be introduced to various approaches to geotechnical design of shallow and deep foundations using in situ tests. Importantly, the text discusses the potential advantages and disadvantages of using in situ tests.

Download or read book Geotechnical and Geophysical Site Characterization written by An-Bin Huang and published by CRC Press. This book was released on 2008-04-04 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical and Geophysical Site Characterization collects the papers presented at the Third International Conference on Site Characterization (ISC 3) that took place in Taipei from April 1-4, 2008. The subjects covered include new developments in mechanical in-situ testing and interpretation techniques, statistical analysis of test data, geo