Download or read book The Practical Safety Guide to Zero Harm written by Wayne Herbertson and published by . This book was released on 2008 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contemplating the contents of this book, one realizes the potential it contains to contribute to the reformation of attitudes on the job toward an environment of limiting if not eliminating physical harm in the workplace. Through the proposition of marrying behavior to attitude, feelings and skills in the workforce, safety in the organization can be lifted to its rightful place against the demanded outcomes of operational entities usually considered to be only financial success. This publication lifts the consideration of zero harm in the workplace to be not only of equal importance, but in fact to be the driver of success for the enterprise, not only economically but also of good corporate behavior. By patient demonstration this book will assist management to arrive at and set values compatible with the installation of processes to build skills, set attitudes, and encourage pride across the workforce to deliver superior outcomes with respect to safety. As demonstrated, a leadership focus extending from management through to individual team, and ultimately to total company commitment, can be put into practice to enable continuous improvement to occur through safety as a core value. Regulation and risk control is becoming a subject of heightened focus by government authorities, and management obligations continue to be raised with appropriate penalties extracted for non compliance. Procedures and processes to help the practitioner "continuously improve" his performance are laid out with clarity in this book, having been developed and tested thoroughly by professionals having had many years experience in building up procedures. This book is a must as a handbook and ready reference for all managers seeking continuous improvement in safety maturity and leadership.
Download or read book Practical Safety Guide to Zero Harm written by Wayne G. Herbertson and published by Booksurge Llc. This book was released on 2008-10 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contemplating the contents of this book, one realizes the potential it contains to contribute to the reformation of attitudes on the job toward an environment of limiting if not eliminating physical harm in the workplace. Through the proposition of marrying behavior to attitude, feelings and skills in the workforce, safety in the organization can be lifted to its rightful place against the demanded outcomes of operational entities usually considered to be only financial success. This publication lifts the consideration of zero harm in the workplace to be not only of equal importance, but in fact to be the driver of success for the enterprise, not only economically but also of good corporate behavior. By patient demonstration this book will assist management to arrive at and set values compatible with the installation of processes to build skills, set attitudes, and encourage pride across the workforce to deliver superior outcomes with respect to safety. As demonstrated, a leadership focus extending from management through to individual team, and ultimately to total company commitment, can be put into practice to enable continuous improvement to occur through safety as a core value. Regulation and risk control is becoming a subject of heightened focus by government authorities, and management obligations continue to be raised with appropriate penalties extracted for non compliance. Procedures and processes to help the practitioner "continuously improve" his performance are laid out with clarity in this book, having been developed and tested thoroughly by professionals having had many years experience in building up procedures. This book is a must as a handbook and ready reference for all managers seeking continuous improvement in safety maturity and leadership.
Download or read book Zero Harm How to Achieve Patient and Workforce Safety in Healthcare written by Craig Clapper and published by McGraw-Hill Education. This book was released on 2018-11-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the nation’s leading experts in healthcare safety—the first comprehensive guide to delivering care that ensures the safety of patients and staff alike. One of the primary tenets among healthcare professionals is, “First, do no harm.” Achieving this goal means ensuring the safety of both patient and caregiver. Every year in the United States alone, an estimated 4.8 million hospital patients suffer serious harm that is preventable. To address this industry-wide problem—and provide evidence-based solutions—a team of award-winning safety specialists from Press Ganey/Healthcare Performance Improvement have applied their decades of experience and research to the subject of patient and workforce safety. Their mission is to achieve zero harm in the healthcare industry, a lofty goal that some hospitals have already accomplished—which you can, too. Combining the latest advances in safety science, data technology, and high reliability solutions, this step-by-step guide shows you how to implement 6 simple principles in your workplace. 1. Commit to the goal of zero harm.2. Become more patient-centric.3. Recognize the interdependency of safety, quality, and patient-centricity.4. Adopt good data and analytics.5. Transform culture and leadership.6. Focus on accountability and execution. In Zero Harm, the world’s leading safety experts share practical, day-to-day solutions that combine the latest tools and technologies in healthcare today with the best safety practices from high-risk, yet high-reliability industries, such as aviation, nuclear power, and the United States military. Using these field-tested methods, you can develop new leadership initiatives, educate workers on the universal skills that can save lives, organize and train safety action teams, implement reliability management systems, and create long-term, transformational change. You’ll read case studies and success stories from your industry colleagues—and discover the most effective ways to utilize patient data, information sharing, and other up-to-the-minute technologies. It’s a complete workplace-ready program that’s proven to reduce preventable errors and produce measurable results—by putting the patient, and safety, first.
Download or read book The Practical Safety Guide to Zero Harm written by Wayne Herbertson and published by . This book was released on 2008-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Here is your reference dor developing the organizational strategies and process to achieve Zero Harm. The 'all you need' guide for safety implementation in your workplace. You will refer to this guide again and again. You will discover how to: create organizational readiness using an organizational design tool ; Make effective design choices to improve safety and productivity ; Apply the practical safety 7 steps to success ; Use simple processes that you can apply now ; Use links to our website - packed with valuable forms, checklists and other resources." - back cover.
Download or read book From Accidents to Zero written by Andrew Sharman and published by Routledge. This book was released on 2016-05-20 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: As leaders increasingly understand the importance of good safety practice to support their business objectives, safety and health practitioners develop better tools and solutions. However, there is still a gulf between these two groups where engagement, communication and shared understanding can be found lacking. From Accidents to Zero opens up the field of safety culture and breaks it down into bite-sized pieces to facilitate new, critical thought and inspire practical action. Based on the concept of creating safety, as opposed to just preventing accidents, each of the 26 chapters in this user-friendly book includes explanation, commentary, reflections and practical activities designed to systematically and sustainably improve workplace safety culture. Core topics range from behaviour to values, daily rituals to unsafe acts, felt leadership to trust. Andrew Sharman's practical guide blends current academic thinking with authoritative guidance and sets up the opportunity for all parts of the organization to close the gap by providing very clear steps to thinking and acting differently. It sparks insight into how both traditional methods and novel approaches can be brought to life in real world situations. From Accidents to Zero offers a clear route to culture change through over one hundred pragmatic ideas to motivate and lead people, influence behaviour and drive a positive evolution in workplace safety.
Download or read book Zero Harm How to Achieve Patient and Workforce Safety in Healthcare written by Craig Clapper and published by McGraw Hill Professional. This book was released on 2018-11-09 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the nation’s leading experts in healthcare safety—the first comprehensive guide to delivering care that ensures the safety of patients and staff alike. One of the primary tenets among healthcare professionals is, “First, do no harm.” Achieving this goal means ensuring the safety of both patient and caregiver. Every year in the United States alone, an estimated 4.8 million hospital patients suffer serious harm that is preventable. To address this industry-wide problem—and provide evidence-based solutions—a team of award-winning safety specialists from Press Ganey/Healthcare Performance Improvement have applied their decades of experience and research to the subject of patient and workforce safety. Their mission is to achieve zero harm in the healthcare industry, a lofty goal that some hospitals have already accomplished—which you can, too. Combining the latest advances in safety science, data technology, and high reliability solutions, this step-by-step guide shows you how to implement 6 simple principles in your workplace. 1. Commit to the goal of zero harm.2. Become more patient-centric.3. Recognize the interdependency of safety, quality, and patient-centricity.4. Adopt good data and analytics.5. Transform culture and leadership.6. Focus on accountability and execution. In Zero Harm, the world’s leading safety experts share practical, day-to-day solutions that combine the latest tools and technologies in healthcare today with the best safety practices from high-risk, yet high-reliability industries, such as aviation, nuclear power, and the United States military. Using these field-tested methods, you can develop new leadership initiatives, educate workers on the universal skills that can save lives, organize and train safety action teams, implement reliability management systems, and create long-term, transformational change. You’ll read case studies and success stories from your industry colleagues—and discover the most effective ways to utilize patient data, information sharing, and other up-to-the-minute technologies. It’s a complete workplace-ready program that’s proven to reduce preventable errors and produce measurable results—by putting the patient, and safety, first.
Download or read book Safety at the Sharp End written by Dr Margaret Crichton and published by Ashgate Publishing, Ltd.. This book was released on 2013-08-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety at the Sharp End is a general guide to the theory and practice of non-technical skills for safety. It covers the identification, training and evaluation of non-technical skills and has been written for use by individuals who are studying or training these skills on CRM and other safety or human factors courses. The material is also suitable for undergraduate and post-experience students studying human factors or industrial safety programmes.
Download or read book Workplace Safety written by Dan Hopwood and published by John Wiley & Sons. This book was released on 2006-08-28 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Workplace Safety: A Guide For Small & Mid-Sized Companies, by Dan Hopwood and Steve Thompson, uses a straight-forward approach to creating the basic elements of a successful safety program. This book will provide updated information and real world examples illustrating how to prevent as well as confront the common health and safety issues that arise in the workplace. It includes information on core OSHA regulatory requirements, safety needs assessment, workers' compensation and insurance, disaster and emergency planning, ergonomics, risk management and loss prevention, injury management, incident investigation, workplace security, best practices, and workplace safety culture formation.
Download or read book Forklift Safety written by George Swartz and published by Government Institutes. This book was released on 1999-06-01 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for the more than 1.5 million powered industrial truck operators and supervisors in general industry, as well as those in the construction and marine industries, this Second Edition provides an updated guide to training operators in safety and complying with OSHA's 1999 forklift standard. This edition of Forklift Safety includes a new chapter devoted to the new OSHA 1910.178 standard and new information regarding dock safety, narrow aisle trucks, off-dock incidents, tip-over safety, pallet safety, and carbon monoxide.
Download or read book Human Behavior in Hazardous Situations written by Jan M T Daalmans and published by Butterworth-Heinemann. This book was released on 2012-11-07 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Behavior in Hazardous Situations introduces a new generation within safety management, fully developed with neuropsychological insights, developed in collaboration with, and put to test by, the chemical and process industries. Until now, there has been little theoretical framework on how, and especially why, people behave the way they do in hazardous situations. Human Behavior in Hazardous Situations presents new theories, based on a human behavioral approach, to offer a fresh perspective on safety management. By way of case studies, practical tips and exercises, Dr Jan Daalmans demonstrates how this neuropsychological approach can be applied for those safety managers working in the Chemical, Process and Pharmaceutical industries. Presents new brain-based approaches to safety, with a historical perspective on the evolution of the safety management. Practical tips and guidance for those working in the chemical and process industries. Including exercises and case studies to demonstrate the practical application of techniques.
Download or read book Practical Guide to Safety Leadership written by Luke Daniel and published by Routledge. This book was released on 2017-12-12 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leaders can shape an organisation through their behaviours and their vision. If an organisation lacks a clear vision or there is disengagement by the leadership team, then the results can be disastrous. In such circumstances change is needed. When change is needed, the value of safety can become a change agent. From the disciplines of leadership and safety comes the emerging topic of safety leadership. Through safety leadership, workplace challenges can be rectified and the desired behaviours reinforced. These challenges can span from a lack of leadership engagement, poor safety performance, complacency or lack of safety ownership. Understanding how safety leadership differs from other leadership theories can give you a competitive edge which is not solely based upon financial quotas, but instead based upon the moral code of ensuring the health and well-being of your employees. This book goes beyond mere safety slogans or anecdotal stories that relate to safety leadership. Instead an empirical and research-based approach will be shared which can help improve the overall culture of an organisation as well as the safety of employees. Tools, case studies, theories and practical applications will be shared which can help create the blueprint for organisational change that you seek. Even when things are working well, constant innovation and adoption of best practices can help companies go from good to great and leave a lasting legacy for employees and customers alike. Detailing the mechanics of safety leadership, this book will drive the change and results you want.
Download or read book Occupational Health and Safety Management written by Charles D. Reese and published by CRC Press. This book was released on 2008-10-24 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed to provide safety and health students with an understanding of the how-tos of implementing an occupational safety and health initiative, the first edition of Occupational Health and Safety Management soon became a blueprint for occupational safety and health management for the smallest- to the largest-sized companies. Competently followin
Download or read book Safety Differently written by Sidney Dekker and published by CRC Press. This book was released on 2014-06-23 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, Safety Differently: Human Factors for a New Era is a complete update of Ten Questions About Human Error: A New View of Human Factors and System Safety. Today, the unrelenting pace of technology change and growth of complexity calls for a different kind of safety thinking. Automation and new technologies have resu
Download or read book Safety and Ethics in Healthcare A Guide to Getting it Right written by Professor Alan Merry and published by Ashgate Publishing, Ltd.. This book was released on 2012-10-01 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: A single coherent source of information on the various interlinking domains of patient safety, litigation and ethical behaviour, based on accounts of real-life situations and intended for all healthcare students, specialists and administrators.
Download or read book Next Generation Safety Leadership written by Clive Lloyd and published by CRC Press. This book was released on 2020-07-30 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next Generation Safety Leadership illustrates practical applications that bring theory to life through case studies and stories from the author's years of experience in high-risk industries. The book provides safety leaders and their organisations with a compelling case for change. A key predictor of safety performance is trust, and its associated components of integrity, ability and benevolence (care). The next generation of safety leaders will take the profession forward by creating trust and psychological safety. The book provides safety leaders with actionable goals to enable positive change and translates academic languages into practical applications. It leaves the reader with a clear strategy to move forward in developing a safety plan and utilizes stories, humor, and case studies set in high-risk industries. Written primarily for the safety community and can be used to influence day to day safety operations in high-risk organisations.
Download or read book A Definitive Guide to Behavioural Safety written by Tim Marsh and published by Taylor & Francis. This book was released on 2017-06-07 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes the case that far too much work undertaken under the banner of ‘behavioural safety’ is overly person-focused. ‘If you can walk on hot coals, you can do anything – so be safe’ needs to be dismissed out of hand, but also more advanced techniques based on coaching and empowerment fail to reflect the fact that, as ‘Just Culture’ models show, the great majority of causes of unsafe behaviour are environmental. Our methodologies mustn’t focus on the person with an open mind that there may be an underlying root cause; they must start from the statistically proven assumption that there is an underlying cause. This shift in mindset has a profound impact on the type of methodologies we must lead with, how they are used, how they are perceived, and last but certainly not least, their efficacy. A Definitive Guide to Behavioural Safety is a one-stop guide to all of the core theories and principles that underpin behaviour-based safety. All front-line behaviours that lead to incidents and injury are covered by the term behavioural safety, and getting to grips with the behaviours that might lead people to engage in unsafe or risky behaviour is crucial to prevention. In this book, internationally acclaimed behavioural safety expert Tim Marsh leads the reader through the three main strands: The awareness approach. The walk-and-talk approach. The Six Sigma safety or the Deming-inspired ‘full’ approach. Going through the very latest innovations in the field, the book covers the systemic approach to safety observation, measurement, intervention and analysis, but also incorporates emotional intelligence training aimed at enhancing supervisor–worker trust and communication more generally. A Definite Guide to Behavioural Safety is a perfect guide for any professional, whether you’re aiming to set up an ambitious and wide-ranging behavioural safety programme from scratch or you’re looking to refresh or extend an existing approach.
