Download or read book Piezoresistive Effect of p Type Single Crystalline 3C SiC written by Hoang-Phuong Phan and published by Springer. This book was released on 2017-04-06 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the piezoresistance in p-type 3C-SiC, which it investigates using experimental characterization and theoretical analysis. The gauge factor, the piezoresistive coefficients in two-terminal and four-terminal resistors, the comparison between single crystalline and nanocrystalline SiC, along with the temperature dependence of the piezoresistive effect in p-type 3C-SiC are also discussed. Silicon carbide (SiC) is an excellent material for electronic devices operating at high temperatures, thanks to its large energy band gap, superior mechanical properties and extreme chemical inertness. Among the numerous polytypes of SiC, the cubic single crystal, which is also well known as 3C-SiC, is the most promising platform for microelectromechanical (MEMS) applications, as it can be epitaxially grown on an Si substrate with diameters of up to several hundred millimeters. This feature makes 3C-SiC compatible with the conventional Si-based micro/nano processing and also cuts down the cost of SiC wafers. The investigation into the piezoresistive effect in 3C-SiC is of significant interest for the development of mechanical transducers such as pressure sensors and strain sensors used for controlling combustion and deep well drilling. Although a number of studies have focused on the piezoresistive effect in n-type 3C-SiC, 4H-SiC and 6H-SiC, comparatively little attention has been paid to piezoresistance in p-type 3C-SiC. In addition, the book investigates the piezoresistive effect of top-down fabricated SiC nanowires, revealing a high degree of sensitivity in nanowires employing an innovative nano strain-amplifier. The large gauge factors of the p-type 3C-SiC at both room temperature and high temperatures found here indicate that this polytype could be suitable for the development of mechanical sensing devices operating in harsh environments with high temperatures.
Download or read book Summaries of the UDAEC Basic Research Programs in Metallurgy Solid State Physics and Ceramics written by and published by . This book was released on 1965 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid State Physics written by and published by Academic Press. This book was released on 1960 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Physics
Download or read book TID written by and published by . This book was released on 1964 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tensor Properties of Solids Part One written by Richard Tinder and published by Springer Nature. This book was released on 2022-05-31 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensor Properties of Solids presents the phenomenological development of solid state properties represented as matter tensors in two parts: Part I on equilibrium tensor properties and Part II on transport tensor properties. Part I begins with an introduction to tensor notation, transformations, algebra, and calculus together with the matrix representations. Crystallography, as it relates to tensor properties of crystals, completes the background treatment. A generalized treatment of solid-state equilibrium thermodynamics leads to the systematic correlation of equilibrium tensor properties. This is followed by developments covering first-, second-, third-, and higher-order tensor effects. Included are the generalized compliance and rigidity matrices for first-order tensor properties, Maxwell relations, effect of measurement conditions, and the dependent coupled effects and use of interaction diagrams. Part I concludes with the second- and higher-order effects, including numerous optical tensor properties. Part II presents the driving forces and fluxes for the well-known proper conductivities. An introduction to irreversible thermodynamics includes the concepts of microscopic reversibility, Onsager's reciprocity principle, entropy density production, and the proper choice of the transport parameters. This is followed by the force-flux equations for electronic charge and heat flow and the relationships between the proper conductivities and phenomenological coefficients. The thermoelectric effects in solids are discussed and extended to the piezothermoelectric and piezoresistance tensor effects. The subjects of thermomagnetic, galvanomagnetic, and thermogalvanomagnetic effects are developed together with other higher-order magnetotransport property tensors. A glossary of terms, expressions, and symbols are provided at the end of the text, and end-of-chapter problems are provided on request. Endnotes provide the necessary references for further reading. Table of Contents: I. Equilibrium Tensor Properties of Solids / Introduction / Introduction to Tensor Notation, Tensor Transformations, Tensor Calculus, and Matrix Representation / Crystal Systems, Symmetry Elements, and Symmetry Transformations / Generalized Thermostatics and the Systematic Correlation of Physical Properties / The Dependent Coupled Effects and the Interrelationships Between First-Order Tensor Properties - Use of Interaction Diagrams / Third- and Fourth-Rank Tensor Properties - Symmetry Considerations / Second- and Higher-Order Effects - Symmetry Considerations / II. Transport Properties of Solids / Introduction to Transport Properties and the Thermodynamics of Irreversible Processes / Thermoelectric, Piezothermoelectric, and Diffusive Effects in Solids / Effect of Magnetic Field on the Transport Properties / Appendix A: Magnetic Tensor Properties, Magnetic Crystals, and the Combined Space-Time Transformations / Endnotes / Glossary / Biography / Index
Download or read book Solid State Physics Fluidics and Analytical Techniques in Micro and Nanotechnology written by Marc J. Madou and published by CRC Press. This book was released on 2011-06-13 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a clear theoretical understanding of MEMS and NEMS, Solid-State Physics, Fluidics, and Analytical Techniques in Micro- and Nanotechnology focuses on nanotechnology and the science behind it, including solid-state physics. It provides a clear understanding of the electronic, mechanical, and optical properties of solids relied on in integrated circuits (ICs), MEMS, and NEMS. After exploring the rise of Si, MEMS, and NEMS in a historical context, the text discusses crystallography, quantum mechanics, the band theory of solids, and the silicon single crystal. It concludes with coverage of photonics, the quantum hall effect, and superconductivity. Fully illustrated in color, the text offers end-of-chapter problems, worked examples, extensive references, and a comprehensive glossary of terms. Topics include: Crystallography and the crystalline materials used in many semiconductor devices Quantum mechanics, the band theory of solids, and the relevance of quantum mechanics in the context of ICs and NEMS Single crystal Si properties that conspire to make Si so important Optical properties of bulk 3D metals, insulators, and semiconductors Effects of electron and photon confinement in lower dimensional structures How evanescent fields on metal surfaces enable the guiding of light below the diffraction limit in plasmonics Metamaterials and how they could make for perfect lenses, changing the photonic field forever Fluidic propulsion mechanisms and the influence of miniaturization on fluid behavior Electromechanical and optical analytical processes in miniaturized components and systems The first volume in Fundamentals of Microfabrication and Nanotechnology, Third Edition, Three-Volume Set, the book presents the electronic, mechanical, and optical properties of solids that are used in integrated circuits, MEMS, and NEMS and covers quantum mechanics, electrochemistry, fluidics, and photonics. It lays the foundation for a qualitative and quantitative theoretical understanding of MEMS and NEMS.
Download or read book Tensor Properties of Solids Part Two written by Richard Tinder and published by Springer Nature. This book was released on 2022-05-31 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensor Properties of Solids presents the phenomenological development of solid state properties represented as matter tensors in two parts: Part I on equilibrium tensor properties and Part II on transport tensor properties. Part I begins with an introduction to tensor notation, transformations, algebra, and calculus together with the matrix representations. Crystallography, as it relates to tensor properties of crystals, completes the background treatment. A generalized treatment of solid-state equilibrium thermodynamics leads to the systematic correlation of equilibrium tensor properties. This is followed by developments covering first-, second-, third-, and higher-order tensor effects. Included are the generalized compliance and rigidity matrices for first-order tensor properties, Maxwell relations, effect of measurement conditions, and the dependent coupled effects and use of interaction diagrams. Part I concludes with the second- and higher-order effects, including numerous optical tensor properties. Part II presents the driving forces and fluxes for the well-known proper conductivities. An introduction to irreversible thermodynamics includes the concepts of microscopic reversibility, Onsager's reciprocity principle, entropy density production, and the proper choice of the transport parameters. This is followed by the force-flux equations for electronic charge and heat flow and the relationships between the proper conductivities and phenomenological coefficients. The thermoelectric effects in solids are discussed and extended to the piezothermoelectric and piezoresistance tensor effects. The subjects of thermomagnetic, galvanomagnetic, and thermogalvanomagnetic effects are developed together with other higher-order magnetotransport property tensors. A glossary of terms, expressions, and symbols are provided at the end of the text, and end-of-chapter problems are provided on request. Endnotes provide the necessary references for further reading. Table of Contents: I. Equilibrium Tensor Properties of Solids / Introduction / Introduction to Tensor Notation, Tensor Transformations, Tensor Calculus, and Matrix Representation / Crystal Systems, Symmetry Elements, and Symmetry Transformations / Generalized Thermostatics and the Systematic Correlation of Physical Properties / The Dependent Coupled Effects and the Interrelationships Between First-Order Tensor Properties - Use of Interaction Diagrams / Third- and Fourth-Rank Tensor Properties - Symmetry Considerations / Second- and Higher-Order Effects - Symmetry Considerations / II. Transport Properties of Solids / Introduction to Transport Properties and the Thermodynamics of Irreversible Processes / Thermoelectric, Piezothermoelectric, and Diffusive Effects in Solids / Effect of Magnetic Field on the Transport Properties / Appendix A: Magnetic Tensor Properties, Magnetic Crystals, and the Combined Space-Time Transformations / Endnotes / Glossary / Biography / Index
Download or read book Powder and Bulk Solids Handling Processes written by Koichi Iinoya and published by Routledge. This book was released on 2017-09-19 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing key issues in the instrumentation of powder handling processes, this up-to-date volumeserves as an excellent source of new ideas for designing on-line instruments, as well as a helpfulguide for understanding and applying measurement principles.Describing physical and chemical principles in clear, simple language, Powder and BulkSolids Handling Processes provides substantial background material that lists related industrialfields and the physical representation of powder properties . . . focuses on instrumentation,reviewing state variables in powder processes . . . discusses the sampling of particles from apowder bed or suspension flow as a basic method for evaluating powder handling processes ... andpresents incisive information on various methods and instruments used for on-line measurement ofpowder flow rate, particle concentration in suspension, level of powder in storage vessels, andmore.Complete with references, equations, illustrations, and tables, this volume is essential reading forchemical, mechanical, systems, ceramic, and civil engineers, instrumentation engineers in powderand bulk solid processes, and upper-level undergraduate and graduate students in chemical andmechanical engineering.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MEMS written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2005-11-29 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and updated, the new edition of the best-selling MEMS Handbook is now presented as a three-volume set that offers state-of-the-art coverage of microelectromechanical systems. Through chapters contributed by top experts and pioneers in the field, MEMS: Design and Fabrication presents a comprehensive look at the materials, procedures, tools, and techniques of MEMS fabrication. New chapters in this edition examine the materials and fabrication of polymer microsystems and optical diagnostics for investigating the entrance length in microchannels. Rigorous yet accessible, this volume provides the practical knowledge needed for work in cutting-edge MEMS applications.
Download or read book Electronic Properties of Materials written by H. Thayne Johnson and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 1697 pages. Available in PDF, EPUB and Kindle. Book excerpt: HIS FIRST EDITION OF Electronic Properties of Force Materials Laboratory, where Air Force respon T Materials: A Guide to the Literature initiates a sibility for these contracts has resided. Mr. John W. plan for making available the indexing work of the Atwood is Project Manager at Hughes Aircraft Electronic Properties Information Center. Since the Company. inception of EPIC in June, 1961, a basic objective has Professional members of EPIC are Charles L. M. been to use techniques and procedures that would Blocher, Donald L. Grigsby, Dana H. Johnson, allow maximum distribution and use of EPIC output. Thomas J. Lyndon, John T. Milek, Meta S. Neu Accordingly, data processing and reproduction tech berger, and Emil Schafer. All have ably contributed niques were established to reproduce and distribute to this work. Mr. Johnson and Mrs. Neuberger have easily and economically a few copies of what was been primarily responsible for the indexing effort; then a card index. Mr. Lyndon has supervised the classical library pro As the program advanced, it became apparent that cedures and the clerical effort; Mr. Blocher and Mr. a few copies of the index were not enough. The index Grigsby have controlled the indexing vocabulary, the should be available to all, instead of just a select few. cross-references, and the data processing input; and However, this would have meant so many copies that Mr. Schafer has prepared the very excellent glossary, the cost would have drained funds from the program with the assistance of Mr. Milek.
Download or read book Group IV Semiconductor Nanostructures 2006 Volume 958 written by Leonid Tsybeskov and published by . This book was released on 2007-03-28 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on advances in materials science and device applications of nanostructures composed of Si, Ge, diamond, SiGe and SiCGe. Continuous progress in the development of reproducibly grown quantum dots, wires and wells has produced a new class of functional materials and devices with characteristic dimensions less than 50nm. The broad spectrum of these devices ranges from commercially offered high-mobility transistors using strained Si to exploratory SiGe nanostructures for integrated optical interconnects and THz lasers. This book brings together researchers from chemistry, physics, biology, materials science and engineering to share and discuss both the challenges and progress towards a new generation of Si(SiGe, SiCGe)-based novel functional structures and devices. Topics include: light emission and photonic devices; Ge, SiGe and diamond nanostructures; strains, Si/Ge films and layers and Si nanocrystals.
Download or read book International Symposium on Micro Machine and Human Science Proceedings written by and published by . This book was released on 1998 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ferroelectric Materials and Ferroelectricity written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a joint effort of the Research Materials Information Center (RMIC) of the Solid State Division at Oak Ridge National Laboratory and the Libraries and Information Systems Center at Bell Telephone Laboratories (BTL) Murray Hill, N. J. The Research Materials Information Center has, since 1963, been answering inquiries on the avail ability, preparation, and properties of inorganic solid-state research materials. The preparation of bibliographies has been essential to this function, and the interest in ferroelectrics led to the compila tion of the journal and report literature on that subject. The 1962 book Ferroelectric Crystals, by Jona and Shirane, was taken as a cutoff point, and all papers through mid-1969 received by the Center have been included. The Libraries and Information Systems Center of BTL has, over a period of years, developed a proprie tary package of computer programs called BELDEX, which formats and generates indexes to biblio graphic material. This group therefore undertook to process RMIC's ferroelectric references by BELDEX so that both laboratories could have the benefit of an indexed basic bibliography in this important research area.
Download or read book Hall Effect Devices written by R.S. Popovic and published by CRC Press. This book was released on 2003-12-01 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of a very popular 1991 book describing the physics and technology of semiconductor electronic devices exploiting the Hall effect. These are magnetic field sensitive devices such as Hall elements, magnetoresistors, and magnetotransistors. Hall effect devices are commonly used as magnetic field sensors and as means for char
Download or read book Transducers 01 Eurosensors XV written by Ernst Obermeier and published by Springer. This book was released on 2016-05-12 with total page 1763 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference is the premier international meeting for the presentation of original work addressing all aspects of the theory, design, fabrication, assembly, packaging, testing and application of solid-state sensors, actuators, MEMS, and microsystems.
Download or read book Bell Telephone System Technical Publications written by Bell Telephone Laboratories, inc and published by . This book was released on with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
