Download or read book New Forests written by Sadanandan Nambiar and published by CSIRO PUBLISHING. This book was released on 2005-11-10 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no question that the timber industry needs to adopt sustainable practices that ensure a future for the industry. This book goes well beyond simply growing commercial tree plantations for wood production. It explores new forests that can supply environmental services such as salinity mitigation and carbon sequestration together with commercial wood production in an environment beyond the boundaries of traditional forestry. New Forests targets agricultural landscapes affected by salinity and which generally have rainfall less than 650 mm per year. The book addresses vital issues such as where tree planting might best be pursued, what species and technologies should be used for establishment and later management, how productivity can be improved, what mix of environmental services and commercial goods is optimum, and whether the likely net benefits justify the change in land use and requisite investment. While the book is focussed on the low-rainfall, agricultural, inland zone of the Murray-Darling Basin wherever possible the scope of most chapters has been expanded to synthesise generic information applicable to other regions in Australia and elsewhere. The authors provide a comprehensive account of all the issues relevant to the development of these new forests, covering soils, the bio-physical environment, water use and irrigation strategies - including the use of wastewater, silviculture, pests and diseases, wood quality and products, and economics and policy implications.
Download or read book Australian Forestry written by and published by . This book was released on 2002 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Biology of Reaction Wood written by Barry Gardiner and published by Springer Science & Business Media. This book was released on 2014-01-08 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a fundamental reference source on reaction wood for wood scientists and technologists, plant biologists, silviculturists, forest ecologists, and anyone involved in the growing of trees and the processing of wood. It brings together our current understanding of all aspects of reaction wood, and is the first book to discuss both compression wood and tension wood. Trees produce reaction wood to maintain the vertical orientation of their stems and the optimum angle of each branch. They achieve this by laying down fibre cell walls in which differences in physical and chemical structure from those of normal fibres are expressed as differential stresses across the stem or branch. This process, while of obvious value for the survival of the tree, causes serious problems for the utilisation of timber. Timber derived from trees containing significant amounts of reaction wood is subject to dimensional instability on drying, causing twisting, bending and splitting. It is also difficult to work as timber, and for the pulp and paper industry the cost of removing the increased amount of lignin in compression wood is substantial. This has both practical and economic consequences for industry. Understanding the factors controlling reaction wood formation and its effect on wood structure is therefore fundamental to our understanding of the adaptation of trees to their environment and to the sustainable use of wood. The topics covered include: -Morphology, anatomy and ultrastructure of reaction wood -Cell-wall polymers in reaction wood and their biosynthesis -Changes in tree proteomes during reaction wood formation -The biomechanical action and biological functions of reaction wood - Physical and mechanical properties of reaction wood from the scale of cell walls to planks -The detection and characterisation of compression wood -Effects of reaction wood on the performance of wood and wood-based products - Commercial implications of reaction wood and the influence of forest management on its formation
Download or read book Wood Structure and Properties 02 written by Stanislav Kurjatko and published by Arbora Publishers. This book was released on 2002 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agroforestry for Natural Resource Management written by Ian Nuberg and published by CSIRO PUBLISHING. This book was released on 2009-05-18 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its early days, agroforestry may have been viewed as the domain of the 'landcare enthusiast'. Today, integrating trees and shrubs into productive farming systems is seen as a core principle of sustainable agriculture. Agroforestry for Natural Resource Management provides the foundation for an understanding of agroforestry practice in both high and low rainfall zones across Australia. Three major areas are discussed: environmental functions of trees in the landscape (ecosystem mimicry, hydrology, protection of crops, animals and soil, biodiversity, aesthetics); productive functions of trees (timber, firewood, pulp, fodder, integrated multi-products); and the implementation of agroforestry (design, evaluation, establishment, adoption, policy support). The book also includes a DVD that features videos on forest measurement and harvesting, a Farm Forestry Toolbox and many regionally specific agroforestry resources. Written by leading researchers and practitioners from around Australia, Agroforestry for Natural Resource Management will be an essential resource for students in agroforestry courses, as well as a valuable introduction to the field for professionals in related areas.
Download or read book Canadian Journal of Forest Research written by and published by . This book was released on 2012 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Properties and Processing written by Miha Humar and published by MDPI. This book was released on 2020-05-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Download or read book Wood Quality and its Biological Basis written by John Barnett and published by John Wiley & Sons. This book was released on 2009-02-18 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is the most versatile raw material available to man. It isburned as fuel, shaped into utensils, used as a structuralengineering material, converted into fibres for paper production,and put to newer uses as a source of industrial chemicals. Its quality results largely from the chemical and physicalstructure of the cell walls of its component fibres, which can bemodified in nature as the tree responds to physical environmentalstresses. Internal stresses can accumulate, which are releasedcatastrophically when the tree is felled, often rendering thetimber useless. The quality of timber as an engineering materialalso depends on the structure of the wood and the way in which ithas developed in the living tree. Tree improvement for quality cannot be carried out without anunderstanding of the biological basis underlying wood formation andstructure. This volume brings together the viewpoints of bothbiologists and physical scientists, covering the spectrum from theformation of wood to its structure and properties, and relatingthese properties to industrial use. This is a volume for researchers and professionals in plantphysiology, molecular biology and biochemistry.
Download or read book Secondary Xylem Biology written by Yoon Soo Kim and published by Academic Press. This book was released on 2016-02-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Secondary Xylem Biology: Origins, Functions, and Applications provides readers with many lenses from which to understand the whole scope and breadth of secondary xylem. The book builds on a basic comprehension of xylem structure and development before delving into other important issues such as fungal and bacterial degradation and biofuel conversion. Chapters are written by recognized experts who have in-depth knowledge of their specific areas of expertise. It is a single information source containing high quality content, information, and knowledge related to the understanding of biology in woody plants and their applications. - Offers an in-depth understanding of biology in woody plants - Includes topics such as abiotic stresses on secondary xylem formation, fungal degradation of cell walls, and secondary xylem for bioconversion - Progresses from basic details of wood structure, to dynamics of wood formation, to degradation
Download or read book Textbook of Wood Technology written by Alexis John Panshin and published by McGraw-Hill Companies. This book was released on 1980 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Textbook of Wood Technology Structure identification uses and properties of the commercial woods of the United States written by Alexis John Panshin and published by . This book was released on 1964 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tropical Trees and Forests written by F. Halle and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Xylem Structure and the Ascent of Sap written by Melvin T. Tyree and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book was the first to provide an integrated description of sap ascension from an anatomical and functional point of view. The second edition opens with the three-dimensional aspects of wood anatomy. The cohesion-tension theory and new evidence are introduced in response to recent controversies over the mechanism of sap ascent in plants. The physiology, anatomy and biophysics of xylem dysfunction are discussed and new insights into hydraulic architecture are reviewed with special emphasis on physiological limits on maximum transpiration and how hydraulic architecture limits gas exchange, carbon gain and growth of plants. The text concludes with a description of xylem failure and pathology. The book highlights fascinating areas of current research with the aim to stimulate more work in the future.
Download or read book Bwa Yo written by Joel Timyan and published by . This book was released on 1996 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forest Pathology and Plant Health written by Matteo Garbelotto and published by MDPI. This book was released on 2018-04-13 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Forest Pathology and Plant Health" that was published in Forests
Download or read book Handbook of Essential Oils written by K. Husnu Can Baser and published by CRC Press. This book was released on 2009-12-28 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Egyptian hieroglyphs, Chinese scrolls, and Ayurvedic literature record physicians administering aromatic oils to their patients. Today society looks to science to document health choices and the oils do not disappoint. The growing body of evidence of their efficacy for more than just scenting a room underscores the need for production standards, quality control parameters for raw materials and finished products, and well-defined Good Manufacturing Practices. Edited by two renowned experts, the Handbook of Essential Oils covers all aspects of essential oils from chemistry, pharmacology, and biological activity, to production and trade, to uses and regulation. Bringing together significant research and market profiles, this comprehensive handbook provides a much-needed compilation of information related to the development, use, and marketing of essential oils, including their chemistry and biochemistry. A select group of authoritative experts explores the historical, biological, regulatory, and microbial aspects. This reference also covers sources, production, analysis, storage, and transport of oils as well as aromatherapy, pharmacology, toxicology, and metabolism. It includes discussions of biological activity testing, results of antimicrobial and antioxidant tests, and penetration-enhancing activities useful in drug delivery. New information on essential oils may lead to an increased understanding of their multidimensional uses and better, more ecologically friendly production methods. Reflecting the immense developments in scientific knowledge available on essential oils, this book brings multidisciplinary coverage of essential oils into one all-inclusive resource.
Download or read book The Commonwealth Forestry Review written by and published by . This book was released on 1958 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt:
