Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Microstructure and Properties of Materials written by J C M Li and published by World Scientific Publishing Company. This book was released on 2000-10-09 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials. There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials. Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Microstructure of Steels and Cast Irons written by Madeleine Durand-Charre and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.
Download or read book The Microstructure and Design of Alloys written by and published by . This book was released on 1973 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Alloy And Microstructural Design written by John Tien and published by Elsevier. This book was released on 2012-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy and Microstructural Design serves as a guide in translating theory into design and practice and provides text for an applications courses in physical and mechanical metallurgy. Coverage of the book includes a short history and introduction to metals and alloys; high-strength nonferrous alloys; and methods in strengthening metals for commercial use and high temperatures. The text also discusses the composite strengthening; the properties of composites; creep and stress rupture resistance and other factors related to them; fracture toughness; and mechanical equations of state. The book also covers the resistance of metals and alloys against fatigue, aqueous, stress, and hot corrosion, as well as in oxidation and hydrogen embrittlement. The monograph is recommended for practicing engineers in the field of metallurgy who need an easily understood guide with concise text and tables of handy information. The book will also serve as a good learning material for engineering undergraduates who are studying the strength of materials.
Download or read book Fundamental Aspects of Structural Alloy Design written by Robert Jaffee and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: FUNDAMENTAL ASPECTS OF STRUCTURAL ALLOY DESIGN is the proceedings of the tenth Battelle Colloquium in the Materials Sciences, held in Seattle, Washington, and Harrison Hot Springs, B.C., September 15-19, 1975. The theme of the conference was the emerging science of alloy design. Although the relationships of properties of alloys to their composition and structure have long been a dominant theme in physical metallurgy, it is only recently that metallurgists have turned their attention from the analytical, post hoc study of the structure-property relationship to the synthesis approach of alloy design. As usual in the Battelle colloquia, the first day started with a group of introductory lectures presented by leaders in the field, each emphasizing his personal approach to the problem. This provided a historical perspective for the colloquium. These papers, together with the banquet address of Professor J. R. Low, Jr., who was honored at the colloquium, comprise the introductory section of these proceedings. Alloy design is generally specific to a given application. Thus, the needs in alloy design in a number of important applications, gas turbines, electrical-power-generation equipment, airframes, pressure vessels, and nuclear applications were presented in a group of papers. An agenda discus sion on "Needs in Alloy Design" followed. These papers give the external constraints on alloy design applications, and criteria for mechanical, physical, and chemical properties for which the alloys must be designed.
Download or read book Handbook of Mechanical Alloy Design written by George E. Totten and published by CRC Press. This book was released on 2003-11-21 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering one of the field's most thorough treatments of material design principles, including a concise overview of fastener design, the Handbook of Mechanical Alloy Design provides an extensive overview of the effects of alloy compositional design on expected mechanical properties. This reference highlights the design elements that must be considered in risk-based metallurgical design and covers alloy design for a broad range of materials, including the increasingly important powder metal and metal matrix alloys. It discusses the design issues associated with carbon, alloy, and tool steels, microalloyed steels, and more. The Handbook of Mechanical Alloy Design is a must-have reference.
Download or read book Microstructure and Mechanical Properties of Structural Metals and Alloys written by Andrey Belyakov and published by MDPI. This book was released on 2019-06-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers collected in this special issue clearly reflect the modern research trends in materials science. These fields of specific attention are high-Mn TWIP steels, high-Cr heat resistant steels, aluminum alloys, ultrafine grained materials including those developed by severe plastic deformation, and high-entropy alloys. The major portion of the collected papers is focused on the mechanisms of microstructure evolution and the mechanical properties of metallic materials subjected to various thermo-mechanical, deformation or heat treatments. Another large portion of the studies is aimed on the elaboration of alloying design of advanced steels and alloys. The changes in phase content, transformation and particle precipitation and their effect on the properties are also broadly presented in this collection, including the microstructure/property changes caused by irradiation.
Download or read book Steels written by Robert William Kerr Honeycombe and published by John Wiley & Sons. This book was released on 1996-02-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The properties of steels depend critically on their microstructure. By examining the mechanical properties of steels in conjunction with microstructure, the first edition gave a clear description of the development and behavior of these materials - the very foundation of their widespread use. This new edition more explicitly links this theory with applications while retaining the style and purpose of its predecessor.
Download or read book High Entropy Alloys Microstructures and Properties written by David J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2015-08-04 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are relatively few revolutions in the venerable and rather staid field of metallurgy. One can count among them the advent of metallic glasses, of superplastic metals, or of memory-alloys. The latest revolution involves the relatively staid topic of alloy formulation, but is all the more startling because the resultant materials break every long-cherished rule of alloy design. In particular, the famous empirical rules of Hume-Rothery are completely ignored. That is, in the archetypal high-entropy alloy, five metals are alloyed together in equal proportions regardless of atomic-size difference, valence or crystal structure. Commonsense would tell any experienced metallurgist that that could result only in a uselessly brittle mass of intermetallic compounds. But in a truly paradigm-shifting manner, Professor J.W.Yeh of Taiwan correctly predicted that a high configurational entropy could suppress the appearance of detrimental intermetallic compounds and lead to simple familiar microstructures having very useful properties. High-Entropy Alloys can exhibit, for instance, astounding hardness and strength and also have a very good corrosion resistance. The present book summarises the microstructures and properties of all of the high-entropy alloys.
Download or read book High Entropy Alloys written by Anil Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-03-20 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an analysis of the state-of-the-art in high entropy alloys (HEA). In order to increase the qualities of an alloy, one major element is typically chosen and other elements are added to it in small amounts. In order to create multi-component alloys without a single major element, Professor J.W. Yeh described a novel method of alloy design in 2004. This method involved mixing elements in equiatomic or nearly equiatomic proportions. HEAs have a wide range of structural and physical properties and may find use in various applications. HEAs are intended to have high configurational entropy. The fundamental information now known in the subject, the range of different alloy systems and the features that have been investigated so far, the current major study fields, and the technological applications are presented in this book. Includes high entropy alloy fabrication and phase development. Discusses thermodynamic design criteria to develop HEAs. Covers the HEAs functioning characteristics. Compares the different processing routes used for the synthesis of HEAs
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Microstructure and Properties in Metals and Alloys written by Andrea Di Schino and published by Mdpi AG. This book was released on 2023-08-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure design is key in targeting the desired material's properties. Contributions related to microstructure design and characterization are collected in this Topic, together with their relation to the mechanical, fatigue, wear and corrosion resistance of different kinds of metals and alloys. The goal of this Topic is to present contributions related to the relationship between the microstructure and properties of metals and alloys for different applications, including aeronautical and aerospace applications. Different process routes are considered (thermo-mechanical routes and additive manufacturing) in this Topic. Contributions related to welding are also included.
Download or read book Structure and Properties of Engineering Alloys written by William Fortune Smith and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1993 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: A junior-senior level text and reference for use by materials engineers and mechanical engineers in courses entitled advanced physical metallurgy. Foundations of Materials Science and Engineering is designed for a first course in materials science and engineering for engineering students. Understanding that this might be a student's first exposure to materials science, the book presents essential topics in a clear, concise manner, without extraneous details to overwhelm newcomers. Industrial examples and photographs used throughout the book give students a look at the many ways material science and engineering are applied in the real world. Author: William F Smith, University of Central Florida. Publisher's note.
