Download or read book Ice Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-12-15 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book presents ways to mitigate the disastrous effects of snow/ice accumulation and discusses the mechanisms of new coatings deicing technologies. The strategies currently used to combat ice accumulation problems involve chemical, mechanical or electrical approaches. These are expensive and labor intensive, and the use of chemicals raises serious environmental concerns. The availability of truly icephobic surfaces or coatings will be a big boon in preventing the devastating effects of ice accumulation. Currently, there is tremendous interest in harnessing nanotechnology in rendering surfaces icephobic or in devising icephobic surface materials and coatings, and all signals indicate that such interest will continue unabated in the future. As the key issue regarding icephobic materials or coatings is their durability, much effort is being spent in developing surface materials or coatings which can be effective over a long period. With the tremendous activity in this arena, there is strong hope that in the not too distant future, durable surface materials or coatings will come to fruition. This book contains 20 chapters by subject matter experts and is divided into three parts— Part 1: Fundamentals of Ice Formation and Characterization; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered include: factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; icephobicities of superhydrophobic surfaces; anti-icing using microstructured surfaces; icephobic surfaces: features and challenges; bio-inspired anti-icing surface materials; durability of anti-icing coatings; durability of icephobic coatings; bio-inspired icephobic coatings; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.
Download or read book Adhesive Properties of Ice written by Hans Helmut Gunter Jellinek and published by . This book was released on 1957 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ice Adhesion written by Chang-Hwan Choi and published by John Wiley & Sons. This book was released on 2020-11-13 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book presents ways to mitigate the disastrous effects of snow/ice accumulation and discusses the mechanisms of new coatings deicing technologies. The strategies currently used to combat ice accumulation problems involve chemical, mechanical or electrical approaches. These are expensive and labor intensive, and the use of chemicals raises serious environmental concerns. The availability of truly icephobic surfaces or coatings will be a big boon in preventing the devastating effects of ice accumulation. Currently, there is tremendous interest in harnessing nanotechnology in rendering surfaces icephobic or in devising icephobic surface materials and coatings, and all signals indicate that such interest will continue unabated in the future. As the key issue regarding icephobic materials or coatings is their durability, much effort is being spent in developing surface materials or coatings which can be effective over a long period. With the tremendous activity in this arena, there is strong hope that in the not too distant future, durable surface materials or coatings will come to fruition. This book contains 20 chapters by subject matter experts and is divided into three parts— Part 1: Fundamentals of Ice Formation and Characterization; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered include: factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; icephobicities of superhydrophobic surfaces; anti-icing using microstructured surfaces; icephobic surfaces: features and challenges; bio-inspired anti-icing surface materials; durability of anti-icing coatings; durability of icephobic coatings; bio-inspired icephobic coatings; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.
Download or read book The Mechanical Properties of Sea Ice written by W. F. Weeks and published by . This book was released on 1967 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The review discusses the state of thinking of each of the main national groups investigating sea ice and gives an overall appraisal of the field as a whole. Emphasis is placed on (1) the physical basis for interpreting sea ice strength (phase relations, air volume, and structural considerations), (2) theoretical considerations (strength models, air bubbles and salt reinforcement, and interrelations between growth conditions and strength), (3) experimental results (tensile, flexural, shear, and compressive strength, elastic modulus, shear modulus and Poisson's ratio, time dependent effects, and creep), and (4) plate characteristics. The paper includes a review of problems in sea ice investigations, relates the chemical, crystallographic, mechanical, and physical aspects involved, and concludes by showing how to utilize this knowledge to solve practical problems. (Author).
Download or read book Technical Report written by Cold Regions Research and Engineering Laboratory (U.S.) and published by . This book was released on 1983 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Ice Release Processes written by Kazuhiko Itagaki and published by . This book was released on 1983 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ice accreted on high-speed rotors operating in supercooled fog can be thrown off by centrifugal force, creating severe unbalance and dangerous projectiles. A simple force balance analysis indicates that the strength of accreted ice and its adhesive strength can be obtained by measuring the thickness of the accretion, the location of the separation, the rotor speed, and the density. Such an analysis was applied to field and laboratory observations of self-shedding events. The results agree reasonably well with other observations. (Author).
Download or read book The Mechanics of Ice written by John W. Glen and published by . This book was released on 1975 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rubber to Rubber Adhesion written by Dinesh Kumar Kotnees and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: RUBBER TO RUBBER ADHESION Readers will get helpful ideas and in-depth knowledge about various aspects of rubber to rubber adhesion with particular reference to theory and practice. This book covers various aspects of rubber to rubber adhesion which is important theoretically, as well as having practical implications. Rubber is a polymer whose glass transition temperature is well below the room temperature and hence the chains are very mobile at room and higher temperatures, making the material very versatile. Rubber is used in a large number of applications ranging from underground mining to tire to space vehicles. In all these cases, compounded rubbers are used in laminates and joined. The higher the adhesion, the higher will be the joint strength. The principles taught in adhesion science and technology are extensively used to prepare better joints and more useful products. The book serves to satisfy a wide range of disciplines (polymers, materials, chemical, chemistry, mechanical, etc.) and starts with an introduction on rubber, then characterization of rubber, rubber surface and joints and, finally, other chapters on rubber to rubber adhesion. Scientific aspects to understand the technology are highlighted. It gives a comprehensive treatment on adhesion between unvulcanized elastomers, self-healing of elastomers, adhesion between compounded elastomers by co-crosslinking, adhesion between partially vulcanized compounded rubber and partially vulcanized compounded rubber, adhesion between vulcanized rubber and unvulcanized rubber- or partially vulcanized rubber, and adhesion between vulcanized rubber and vulcanized rubber. Audience The book will be used by academicians in polymer science, materials science, chemical and mechanical engineering, chemistry, R & D personnel, industry people, as well as rubber and adhesion practitioners.
Download or read book Special Report Corps of Engineers U S Army Cold Regions Research and Engineering Laboratory written by Cold Regions Research and Engineering Laboratory (U.S.) and published by . This book was released on 1972 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Regions Science and Engineering Monograph written by and published by . This book was released on 1975 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1979 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphysics of Wind Turbines in Extreme Loading Conditions written by Arash Soleiman Fallah and published by Academic Press. This book was released on 2024-01-18 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphysics of Wind Turbines in Extreme Loading Conditions addresses the extreme transient loading of wind turbines through a multiphysics modeling approach, notably by considering the dynamic effects and the nonlinearities of the physics involved in such situations. The book forms the basis for understanding multiphysic numerical simulations conducted on onshore and offshore wind turbines and subjected to extreme loading conditions, including storms, earthquakes, blasts, impacts, and tsunamis. The multiphysics approaches used in this book are explained in each chapter, with algorithms then turned into numerical codes to attain a realistic picture of the dynamic response in each scenario. With numerical methods and loading data explained, the complexity of potential problems encountered when extreme dynamic loads are discussed, along with loading types and their effects. The book fills a specific niche in wind power, namely extreme transient loading of wind turbine, offering information and industrial practices as wind energy makes it useful to practice engineers, designers, undergraduate and graduate students. - Defines best practices for unique scenarios which are not readily available in the wider literature, such as extreme load conditions, earthquake and storm scenarios - Includes multi-physics methods and specific applications within the demands of extreme conditions - Offers numerical simulations of both onshore and offshore wind turbines in one place
Download or read book WES Microthesaurus of Scientific and Technical Terms written by Waterways Experiment Station (U.S.) and published by . This book was released on 1977 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Arctic Bulletin written by and published by . This book was released on 1973 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: One issue each year devoted to the annual report.
Download or read book Techniques for Protecting Overhead Lines in Winter Conditions written by Masoud Farzaneh and published by Springer Nature. This book was released on 2022-02-10 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive review of the various options for improving the performance of overhead power lines in winter conditions, taking into account both mechanical and electrical aspects. Experience within the CIGRE community reveals many strategies to protect overhead power lines from damage caused by heavy build-up of ice and snow or electrical issues such as insulator icing flashovers. The initial approach is to consider the predicted ice loads from the available databases. This is supplemented with some fundamental aspects of icing physics that affect accretion rate as well as factors in ice shedding on traditional (metal, ceramic) and novel treated surfaces. These ice physics concepts structure the ways to categorize and evaluate methods to reduce or prevent icing on conductors and ground wires or to prevent flashover of insulators. Many utilities in cold climate regions have developed and used methods and strategies to reduce ice loads using anti-icing (AI) and / or de-icing (DI) methods. In general, AI methods are used before or early during ice build-up, while DI methods are activated during and sometimes after ice build-up. The book describes and discusses some historical, operational, or potential AI / DI systems in the ice physics context. This supports a comprehensive review of AI coatings including concepts, relevant material properties, application methods, and finally test methods for characterizing the long-term performance.
Download or read book CRREL Technical Publications 1950 1975 written by Cold Regions Research and Engineering Laboratory (U.S.) and published by . This book was released on 1992 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Coatings written by Frank N. Jones and published by John Wiley & Sons. This book was released on 2017-10-02 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to organic coatings, thoroughly revised and updated—now with coverage of a range of topics not covered in previous editions Organic Coatings: Science and Technology, Fourth Edition offers unparalleled coverageof organic coatings technology and its many applications. Written by three leading industry experts (including a new, internationally-recognized coatings scientist) it presents a systematic survey of the field, revises and updates the material from the previous edition, and features new or additional treatment of such topics as superhydrophobic, ice-phobic, antimicrobial, and self-healing coatings; sustainability, artist paints, and exterior architectural primers. making it even more relevant and useful for scientists and engineers in the field, as well as for students in coatings courses. The book incorporates up-to-date coverage of recent developments in the field with detailed discussions of the principles underlying the technology and their applications in the development, production, and uses of organic coatings. All chapters in this new edition have been updated to assure consistency and to enable extensive cross-referencing. The material presented is also applicable to the related areas of printing inks and adhesives, as well as areas within the plastics industry. This new edition Completely revises outdated chapters to ensure consistency and to enable extensive cross-referencing Correlates the empirical technology of coatings with the underlying science throughout Provides expert troubleshooting guidance for coatings scientists and technologists Features hundreds of illustrative figures and extensive references to the literature A new, internationally-recognized coatings scientist brings fresh perspective to the content. Providing a broad overview for beginners in the field of organic coatings and a handy reference for seasoned professionals, Organic Coatings: Science and Technology, Fourth Edition, gives you the information and answers you need, when you need them.
