Download or read book The Manufacture of High Temperature Superconducting Tapes and Films written by Kurt A. Richardson and published by Universal-Publishers. This book was released on 1999-11 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomena of superconductivity has enormous industrial potential, but the penetration of superconductor-based products has, thus far, been slow. An indisputable fact is that there are prizes, and profits, for the teams that solve the critical problems in understanding and processing these complex materials. The continuous processing of superconducting tapes and wires is a necessary stage that will open up the industrial market to the designers of a diverse range of time and energy saving devices, particularly in ultra-fast computing and lossless power transmission. The aim of the research reported herein was to investigate the fabrication of superconducting tapes and films via two different processes, namely: the established PIT technique, and a less well known electrochemical route. The PIT research yielded partially textured (a characteristic not found in previously reported thallium-based PIT tapes) and high purity tapes with promising transport properties. The main subject of this work is the electrodeposition of superconducting films with particular emphasis on the optimisation of the deposition process, as opposed to the optimisation of the post-deposition heat treatment. This is not a well researched area. Therefore the research herein deals with the mechanisms of the deposition process in order to achieve a high standard of reproducibility in producing a variety of superconductor precursor films. The heat-treatment of the as-deposited films was determined, and results are presented concerning the characteristics of the resulting superconducting films. An attempt was made to fabricate, for the first time via electrodeposition, (Tl, Pb)-1223 films. Superconductivity was successfully observed in both Bismuth- and Thallium-based films. Extensive further work is required, but the impact upon society from superconducting devices draws ever nearer.
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-07-07 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperature superconductors, focusing on materials aspects; this timely book coincides with a recent major break-through of the discovery of iron-based superconductors. It provides an overview of materials aspects of high-temperature superconductors, combining introductory aspects, description of new physics, material aspects, and a description of the material properties This title is suitable for researchers in materials science, physics and engineering. Also for technicians interested in the applications of superconductors, e.g. as biomagnets
Download or read book High Temperature Superconducting Materials Science and Engineering written by Donglu Shi and published by Elsevier. This book was released on 1995-02-20 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fascinating field of high-temperature superconductivity. Basic concepts–including experimental techniques and theoretical issues–are discussed in a clear, systematic manner. In addition, the most recent research results in the measurements, materials synthesis and processing, and characterization of physical properties of high-temperature superconductors are presented. Researchers and students alike can use this book as a comprehensive introduction not only to superconductivity but also to materials-related research in electromagnetic ceramics. Special features of the book: presents recent developments in vortex-state properties, defects characterization, and phase equilibrium introduces basic concepts for experimental techniques at low temperatures and high magnetic fields provides a valuable reference for materials-related research discusses potential industrial applications of high-temperature superconductivity includes novel processing technologies for thin film and bulk materials suggests areas of research and specific problems whose solution can make high-Tc superconductors a practical reality
Download or read book High Temperature Superconducting Magnetic Levitation written by Jia-Su Wang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors begin this book with a systematic overview of superconductivity, superconducting materials, magnetic levitation, and superconducting magnetic levitation - the prerequisites to understand the latter part of the book - that forms a solid foundation for further study in High Temperature Superconducting Magnetic Levitation (HTS Maglev). This book presents our research progress on HTS Maglev at Applied Superconductivity Laboratory (ASCLab) of Southwest Jiaotong University (SWJTU), China, with an emphasis on the findings that led to the world‘s first manned HTS Maglev test vehicle "Century". The book provides a detailed description on our previous work at ASCLab including the designing of the HTS Maglev test and measurement method as well as the apparatus, building "Century", developing the HTS Maglev numerical simulation system, and making new progress on HTS Maglev. The final parts of this book discuss research and prototyping efforts at ASCLab in several adjacent fi elds including HTS Maglev bearing, Flywheel Energy Storage System (FESS) and HTS maglev launch technology. We hope this book becomes a valuable source for researchers and engineers working in the fascinating field of HTS Maglev science and engineering. Contents Fundamentals of superconductivity Superconducting materials Magnetic levitation Superconducting magnetic levitation HTS Maglev experimental methods and set-up First manned HTS Maglev vehicle in the world Numerical simulations of HTS Maglev New progress of HTS Maglev vehicle HTS Maglev bearing and flywheel energy storage system HTS Maglev launch technology
Download or read book Processing of High Temperature Superconductors written by Amit Goyal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Included in this volume are papers on biaxial and triaxial crystallographic texturing, epitaxial growth on biaxially textured substrates, melt-processing of YBCO, and basic information about HTS materials concerning phase diagrams, measurement of physical properties, characterization, and effects of various defects including grain boundaries on supercurrent transmission. Proceedings of the symposium held at the 104th Annual Meeting of The American Ceramic Society, April 28-May1, 2002 in Missouri; Ceramic Transactions, Volume 140.
Download or read book High Temperature Superconductors HTS for Energy Applications written by Ziad Melhem and published by Elsevier. This book was released on 2011-12-21 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature superconductors (HTS) offer many advantages through their application in electrical systems, including high efficiency performance and high throughput with low-electrical losses. While cryogenic cooling and precision materials manufacture is required to achieve this goal, cost reductions without significant performance loss are being achieved through the advanced design and development of HTS wires, cables and magnets, along with improvements in manufacturing methods. This book explores the fundamental principles, design and development of HTS materials and their practical applications in energy systems. Part one describes the fundamental science, engineering and development of particular HTS components such as wires and tapes, cables, coils and magnets and discusses the cryogenics and electromagnetic modelling of HTS systems and materials. Part two reviews the types of energy applications that HTS materials are used in, including fault current limiters, power cables and energy storage, as well as their application in rotating machinery for improved electrical efficiencies, and in fusion technologies and accelerator systems where HTS magnets are becoming essential enabling technologies. With its distinguished editor and international team of expert contributors, High temperature superconductors (HTS) for energy applications is an invaluable reference tool for anyone involved or interested in HTS materials and their application in energy systems, including materials scientists and electrical engineers, energy consultants, HTS materials manufacturers and designers, and researchers and academics in this field. Discusses fundamental issues and developments of particular HTS components Comprehensively reviews the design and development of HTS materials and then applications in energy systems Reviews the use of HTS materials and cabling transmissions, fault alignment limiters, energy storage, generators and motors, fusion and accelerator
Download or read book High Temperature Superconductivity 1 written by A. V. Narlikar and published by Springer Science & Business Media. This book was released on 2004 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book High temperature Superconductivity Technology Transfer written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Energy Research and Development and published by . This book was released on 1988 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Research for Manufacturing written by Lynnette D Madsen and published by Springer. This book was released on 2016-01-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about applied materials research in industry. It presents various important topics and challenges and gives guidance to materials researchers who move to industry. The book focuses on the materials manufacturing issues for industrial application. It deals with developments and challenges in traditional materials areas, such as metals and ceramics, and new opportunities that have risen from nanotechnology and additive manufacturing. The chapters, written by senior people from large companies, include successful manufacturing undertakings, several distinct and unresolved manufacturing challenges, with the focus on approaches, timelines and the skills needed for future company research and development. The book provides a cross-section of current and future approaches valuable for new employees and academics working in industry.
Download or read book Advances in Cryogenic Engineering Materials written by R.W. Fast and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers by leading engineers and scientists in the field report the latest advances in low temperature materials science and technology and set priorities for new research. The topics covered include general superconductor theory, measurement, and processing; low temperature superconductors; high tem
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Superconductivity Bhtsc 92 Proceedings Of The Beijing International Conference written by Z X Zhao and published by World Scientific. This book was released on 1993-10-13 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will contain both invited and contributed papers which focus on the search for new high-Tc materials, characterization of their physical properties and microstructures, basic applications and the application of high-Tc superconductors.
Download or read book Introduction to High Temperature Superconductivity written by Thomas Sheahen and published by Springer Science & Business Media. This book was released on 2006-02-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing from physics, mechanical engineering, electrical engineering, ceramics, and metallurgy, high-temperature superconductivity (HTSC) spans nearly the entire realm of materials science. This volume presents each of those disciplines at an introductory level, such that readers will ultimately be able to read the literature in the field.
Download or read book High Temperature Superconductors and Novel Inorganic Materials written by Gustaaf Tendeloo and published by Springer Science & Business Media. This book was released on 1999 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into high-Tc materials demands the co-operation of physicists, chemists and materials scientists to discover the best solutions to the most important challenges presented by the field. In the fifth annual Workshop on High Temperature Superconductors and Novel Inorganic Materials Engineering, the topic is extended beyond high-Tc superconductivity to include other advanced oxide materials, mainly colossal magnetoresistance materials, which are closely related to the ceramic superconductors. This book covers the synthesis, characterisation (both structural and physical) and engineering of this class of materials.
Download or read book Second Generation HTS Conductors written by Amit Goyal and published by Springer Science & Business Media. This book was released on 2006-06-26 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third method invented is called the Rolling-assisted-biaxially-textured-substrates (RABiTS). The book is divided into four sections. The first section discusses the three methods to fabricate biaxially textured substrates, upon which, epitaxial YBCO or other HTS materials can be deposited to realize a single-crystal-like HTS wire. The second section includes chapters on various methods of HTS deposition such as pulsed laser ablation (PLD), thermal co-evaporation, sputtering, pulsed electron beam deposition, ex-situ BaF2 by co-evaporation flowed by annealing, chemical solution based ex-situ processes, jet vapor deposition, metal organic chemical vapor deposition (MOCVD), and liquid phase epitaxy (LPE). The third section includes detailed chapters on other HTS materials such as the various Tl-based and Hg-based conductors. These Second-Generation HTS conductors, also referred to as "Coated conductors" represent one of the most exciting developments in HTS technology.
Download or read book Microstructure and Properties of High Temperature Superconductors written by I. A. Parinov and published by Springer Science & Business Media. This book was released on 2007-09-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive presentation of all types of HTSC and includes a broad overview on HTSC computer simulations and modeling. Especial attention is devoted to the Bi-Sr-Ca-Cu-O and Y-Ba-Cu-O families that today are the most perspective for applications. The book includes a great number of illustrations and references. The monograph is addressed to students, post-graduate students and specialists, taking part in the development, preparation and researching of new materials.
Download or read book High Temperature Superconductor Cable Concepts for Fusion Magnets written by Christian Barth and published by KIT Scientific Publishing. This book was released on 2014-07-20 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three concepts of high temperature superconductor cables carrying kA currents (RACC, CORC and TSTC) are investigated, optimized and evaluated in the scope of their applicability as conductor in fusion magnets. The magnetic field and temperature dependence of the cables is measured; the thermal expansion and conductivity of structure, insulation and filling materials are investigated. High temperature superconductor winding packs for fusion magnets are calculated and compared with corresponding low temperature superconductor cases.
