Download or read book The Magnetic Resonance Force Microscope written by and published by . This book was released on 1997 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: The magnetic resonance force microscope (MRFM) marries the techniques of magnetic resonance imaging (MRI) and atomic force microscopy (AFM), to produce a three-dimensional imaging instrument with high, potentially atomic-scale, resolution. The principle of the MRFM has been successfully demonstrated in numerous experiments. By virtue of its unique capabilities the MRFM shows promise to make important contributions in fields ranging from three-dimensional materials characterization to bio-molecular structure determination. Here the authors focus on its application to the characterization and study of layered magnetic materials; the ability to illuminate the properties of buried interfaces in such materials is a particularly important goal. While sensitivity and spatial resolution are currently still far from their theoretical limits, they are nonetheless comparable to or superior to that achievable in conventional MRI. Further improvement of the MRFM will involve operation at lower temperature, application of larger field gradients, introduction of advanced mechanical resonators and improved reduction of the spurious coupling when the magnet is on the resonator.
Download or read book Design and Development of a Magnetic Resonance Force Microscope that Operates in Air written by Jayanth Gobbalipur Ranganath and published by . This book was released on 2004 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Resonance Force Microscopy (MRFM) is a new and rapidly developing technology that integrates the high-sensitivity of Atomic Force Microscopy with subsurface imaging capability of Magnetic Resonance Imaging. A micro-mechanical cantilever is used to detect force signals originating from magnetic resonance within a sample. While sub-micron resolution has been achieved in certain samples, and single electron-spin sensitivity has been demonstrated, all existing setups operate in vacuum and many at cryogenic temperatures. From the point-of-view of engineering, it would be an important step to improve the resolution so that the instrument can be operated in air and to explore useful samples that can be imaged thus. In this research, a Magnetic Resonance Force Microscope is designed and developed with the intention of being operated in air. Calculations are made to demonstrate its feasibility. It necessitates implementing a high-resolution, compact and easy-to-use motion sensor, and designing suitable electronics to improve the force-sensitivity of the detector. The achieved force sensitivity (~ 10-15 N / vHz) is comparable to the thermal-noise limited sensitivity at room temperature and pressure. The developed sensor also possesses potential applications outside MRFM. For MRFM, this sensor is integrated with the other key-elements of the microscope, including a micro-wave exciter and an electromagnet. The microwave exciter is used to excite a paramagnetic sample that would be imaged. The electromagnet applies a background field. This serves to increase the signal strength. A preliminary experiment is conducted and the problems encountered are discussed.
Download or read book Magnetic Resonance Force Microscopy And A Single spin Measurement written by Gennady P Berman and published by World Scientific. This book was released on 2006-09-20 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic resonance force microscopy (MRFM) is a rapidly evolving field which originated in 1990s and matured recently with the first detection of a single electron spin below the surface of a non-transparent solid. Further development of MRFM techniques will have a great impact on many areas of science and technology including physics, chemistry, biology, and even medicine. Scientists, engineers, and students from various backgrounds will all be interested in this promising field.The objective of this “multi-level” book is to describe the basic principles, applications, and the advanced theory of MRFM. Focusing on the experimental oscillating cantilever-driven adiabatic reversals (OSCAR) detection technique for single electron spin, this book contains valuable research data for scientists working in the field of quantum physics or magnetic resonance. Readers unfamiliar with quantum mechanics and magnetic resonance will be able to obtain an understanding and appreciation of the basic principles of MRFM.
Download or read book Magnetic Resonance Force Microscopy with a Permanent Magnet on the Cantilever written by and published by . This book was released on 1997 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The magnetic resonance force microscope (MRFM) is a microscopic 3-D imaging instrument based on a recent proposal to detect magnetic resonance signals mechanically using a micro-mechanical resonator. MRFM has been successfully demonstrated in various magnetic resonance experiments including electron spin resonance, ferromagnetic resonances and nuclear magnetic resonance. In order to apply this ultra-high, 3-D spatial resolution technique to samples of arbitrary size and shape, the magnetic particle which generates the field gradient (nabla){bold B}, (and, therefore, the force {bold F = (m {center_dot} (nabla)B)} between itself and the spin magnetization {bold m} of the sample) will need to be mounted on the mechanical resonator. Up to the present, all experiments have been performed with the sample mounted on the resonator. This is done, in part, to avoid the spurious response of the mechanical resonator which is generated by the variation of the magnetization of the magnetic particle as the external field is varied.
Download or read book Electronic Applications of Magnetic Resonance Force Microscopy written by and published by . This book was released on 1997 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the final report for Office of Naval Research Contract N0001495-C- 0124. Work under this recently completed contract has focused on improving the basic technology of magnetic resonance force microscopy (MRFM) and working towards the dual goals of dopant detection ill silicon and single electron spin detection. In addition, a number of important advances were achieved, including ultrasensitive force detection, magnetic resonance characterization of dangling bond defects in SiO2, and two and three-dimensional imaging of both paramagnetic and ferromagnetic resonance on the micronscale. Magnetic resonance force microscopy1, 2, 3 (MRPM) is a new scanning probe microscope technique that combines aspects of magnetic resonance imaging (MRI) and atomic force microscopy (APM). IBM's interest in MRFM is driven by the possibility of achieving non-invasive, three-dimensional imaging with atomic-resolution and elemental selectivity. If this goal can be realized, the technique would have a revolutionary impact on the field of microscopy and have many important applications. Potential applications include: 1) determining the sub-surface, three-dimensional structure of solid state materials, 2) imaging three-dimensional distributions of dopants in semiconductors with angstrom spatial resolution, 3) imaging defects and trapping sites in semiconductors, 4) imaging interactions between polymer molecules, 5) determining the three-dimensional atomic structure of macromolecules, such as proteins.
Download or read book Magnetic Resonance Force Microscopy written by Giorgio Moresi and published by Sudwestdeutscher Verlag Fur Hochschulschriften AG. This book was released on 2012-04 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, smaller and smaller electron and nuclear magnetic resonance structures are extensively studied both from an applied and from a fundamental point of view. The powerful tool of magnetic resonance imaging (MRI) has demonstrated that it is possible to visualize subsurface three dimensional structures with micrometer resolution containing 1012 nuclear spins; nuclear magnetic resonance (NMR) spectroscopy has the capacity to determine the three dimensional structure of biological macromolecules. Owing to the larger gyromagnetic ratio of electrons as compared to paramagnetic nuclei, electron spin resonance (ESR) has pushed detection sensitivity to 107 spins . Finally, a single electron spin has been detected by magnetic resonance force microscopy (MRFM), employing a device which combines two sensing technologies, namely magnetic resonance imaging (MRI) and atomic force microscopy (AFM). The ultimate goal of MRFM is to map the interior of a material sample, such as a complicated semiconductor structure or a bio-molecule, at atomic scale resolution.
Download or read book Essential Image Processing for Magnetic Resonance Force Microscopy written by and published by . This book was released on 2003 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report covers work performed on two-dimensional and three-dimensional reconstruction of magnetic images derived from synthetic data sets of a model magnetic-resonance force microscope. Specifically, Pixon LLC has employed its proprietary Pixon-method image reconstruction algorithm in order to perform the reconstructions. We find that the algorithm yields excellent results, in particular as regards image accuracy, resolution, and suppression of noise. A specific and robust regimen for performing the reconstructions within the Pixon-method paradigm has been developed. The regimen is robust against varying signal-to-noise ratio and varying tip-to-sample separation in the MRFM instrument model. Moreover, a data-capture scanning strategy has been discovered that optimizes performance of the reconstruction (resolution and sensitivity) while simultaneously minimizing the data acquisition time. These results should make straightforward the application of the algorithm in a real-world instrument. The results also favor adaptation of Pixon- method image reconstruction techniques to three-dimensional imaging with conventional magnetic-force microscopes.
Download or read book Magnetic Resonance Force Microscopy and a Single spin Measurement written by Gennady P. Berman and published by . This book was released on 2006 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Resonance Force Microscope Development written by and published by . This book was released on 1999 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our objectives were to develop the Magnetic Resonance Force Microscope (MRFM) into an instrument capable of scientific studies of buried structures in technologically and scientifically important electronic materials such as magnetic multilayer materials. This work resulted in the successful demonstration of MRFM-detected ferromagnetic resonance (FMR) as a microscopic characterization tool for thin magnetic films. Strong FMR spectra obtained from microscopic Co thin films (500 and 1000 angstroms thick and 40 x 200 microns in lateral extent) allowed us to observe variations in sample inhomogeneity and magnetic anisotropy field. We demonstrated lateral imaging in microscopic FMR for the first time using a novel approach employing a spatially selective local field generated by a small magnetically polarized spherical crystallite of yttrium iron garnet. These successful applications of the MRFM in materials studies provided the basis for our successful proposal to DOE/BES to employ the MRF M in studies of buried interfaces in magnetic materials.
Download or read book Signal Processing for Magnetic Resonance Force Microscopy written by Michael Yu Jin Ting and published by . This book was released on 2006 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Expanding the Limits of Magnetic Resonance Force Microscopy written by Neil Edward Jenkins and published by . This book was released on 2007 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Magnetic Resonance Force Microscopy written by Kai Wolfgang Eberhardt and published by . This book was released on 2008 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental considerations for the development of a nuclear magnetic resonance force microscope written by Tina Alexandra Barrett and published by . This book was released on 1999 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Resonance Force Microscopy at MilliKelvin Temperatures written by Geert Henricus Cornelius Jozef Wijts and published by . This book was released on 2013 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and construction of a nuclear magnetic resonance force microscope with special attention to micromechanical manipulations and interferometry written by Heiko Andreas Sommer and published by . This book was released on 1995 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics and Control of Magnetic Resonance Force Microscopy written by Kelly Bruland and published by . This book was released on 1997 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Magnetic Resonance Force Microscope written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key technologies required to bring the instrument to market with sensitivity to a few thousand protons were demonstrated including a novel cryogenic coarse approach mechanism and the first-ever batch fabrication of attoNewton-sensitive "ultrafloppy" cantilevers with individual nanomagnets on the tips. A prototype digital-signal-processor (DSP) based cantilever controller suitable for use in an MRFM instrument was developed. It is a significant accomplishment to be able to employ a DSP in a scanned probe microscope measurement. We have determined that this technology is suitable for optimization and manufacture of a commercial microscope, with initial applications in thin-film materials analysis. Eventual broad commercial and military applications will benefit from this technology including: research of advanced materials, advanced semiconductor-device research (e.g. individual impurity and defect characterization, assaying spin injection in spintronics devices), single-molecule analytical chemistry, infectious disease research, biotechnology, nanoelectronics, and new solid-state physics research.
