Download or read book The Magnetic Characterization of Permalloy and Permalloy Oxide Grown by RF Magnetron Sputtering written by Binod D.C. and published by . This book was released on 2019 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes the results on my thesis research. I investigated properties of Permalloy and Permalloy oxide thin films with Xray photoelectron spectroscopy (XPS), Xray diffractometry (XRD) and vibrating sample magnetometry (VSM). Focus was on properties that had not been investigated in detail by former graduate students from Dr. Geerts. The thesis also contains a literature study on the texture of Permalloy and Permalloy oxide RF sputtered films, and preliminary magnetic measurements performed on those samples and magnetic recording samples to learn more about the new MicroSense biaxial VSM. The first chapter first introduces different types of magnetic materials followed by a literature review of Permalloy and Permalloy oxide focused on texture and magnetic properties related to this thesis research. The second chapter starts by introducing the reader to the working principle of the MicroSense vibrating sample magnetometer (VSM). This chapter includes a discussion of the measurement principle, noise sources and systematic errors associated with the VSM measurement method. The available measurement procedures of the VSM lie in the heart of this chapter. The third chapter talks about the AJA Sputtering System which was used to deposit the Permalloy and Permalloy oxide thin films. It includes details on the sputtering system and describes the process used to make the samples. It includes the results of the XPS and magnetic studies on Permalloy oxide. The chapter also talks about the X-ray diffractometer (XRD) which was used to determine the texture of the Permalloy films and includes the XRD measurement results. The fourth chapter mainly focuses on the magnetic case studies on floppy and VHS samples to better understand the MicroSense VSM and its measurement methods. In addition, this chapter also contains the preliminary results on floppy, VHS tape, and Permalloy samples. And finally, the fifth chapter summarizes the most important results of this research work; this chapter also contains details about suggested future works.
Download or read book Nanopackaging written by James E. Morris and published by Springer Science & Business Media. This book was released on 2008-12-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of nanoscale electronics and systems packaging, and covers nanoscale structures, nanoelectronics packaging, nanowire applications in packaging, and offers a roadmap for future trends. Composite materials are studied for high-k dielectrics, resistors and inductors, electrically conductive adhesives, conductive "inks," underfill fillers, and solder enhancement. The book is intended for industrial and academic researchers, industrial electronics packaging engineers who need to keep abreast of progress in their field, and others with interests in nanotechnology. It surveys the application of nanotechnologies to electronics packaging, as represented by current research across the field.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1991 with total page 1240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetic Oxides written by Gerald F. Dionne and published by Springer Science & Business Media. This book was released on 2010-03-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Oxides offers a cohesive up-to-date introduction to magnetism in oxides. Emphasizing the physics and chemistry of local molecular interactions essential to the magnetic design of small structures and thin films, this volume provides a detailed view of the building blocks for new magnetic oxide materials already advancing research and development of nano-scale technologies. Clearly written in a well-organized structure, readers will find a detailed description of the properties of magnetic oxides through the prism of local interactions as an alternative to collective electron concepts that are more applicable to metals and semiconductors. Researchers will find Magnetic Oxides a valuable reference.
Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1995 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book JJAP Letters written by and published by . This book was released on 1995 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Power Impulse Magnetron Sputtering written by Daniel Lundin and published by . This book was released on 2019-09-13 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Power Impulse Magnetron Sputtering: Fundamentals, Technologies, Challenges and Applications is an in-depth introduction to HiPIMS that emphasizes how this novel sputtering technique differs from conventional magnetron processes in terms of both discharge physics and the resulting thin film characteristics. Ionization of sputtered atoms is discussed in detail for various target materials. In addition, the role of self-sputtering, secondary electron emission and the importance of controlling the process gas dynamics, both inert and reactive gases, are examined in detail with an aim to generate stable HiPIMS processes. Lastly, the book also looks at how to characterize the HiPIMS discharge, including essential diagnostic equipment. Experimental results and simulations based on industrially relevant material systems are used to illustrate mechanisms controlling nucleation kinetics, column formation and microstructure evolution. Includes a comprehensive description of the HiPIMS process from fundamental physics to applications Provides a distinctive link between the process plasma and thin film communities Discusses the industrialization of HiPIMS and its real world applications
Download or read book Ultrathin Magnetic Structures II written by Bretislav Heinrich and published by Springer Science & Business Media. This book was released on 2005-12-31 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to understand and control the unique properties of interfaces has created an entirely new field of magnetism, with profound impact in technology and serving as the basis for a revolution in electronics. Our understanding of the physics of magnetic nanostructures has also advanced significantly. This rapid development has generated a need for a comprehensive treatment that can serve as an introduction to the field for those entering it from diverse fields, but which will also serve as a timely overview for those already working in this area. The four-volume work Ultra-Thin Magnetic Structures aims to fulfill this dual need. The original two volumes – now available once more – are "An Introduction to the Electronic, Magnetic and Structural Properties" (Vol. I) and Measurement Techniques and Novel Magnetic Properties (this volume). Two new volumes, "Fundamentals of Nanomagnetism" and "Applications of Nanomagnetism," extend and complete this comprehensive work by presenting the foundations of spintronics.
Download or read book IEEE Translation Journal on Magnetics in Japan written by and published by . This book was released on 1987 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Japanese Technical Abstracts written by and published by . This book was released on 1987 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conference Papers Index written by and published by . This book was released on 1988 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monthly. Papers presented at recent meeting held all over the world by scientific, technical, engineering and medical groups. Sources are meeting programs and abstract publications, as well as questionnaires. Arranged under 17 subject sections, 7 of direct interest to the life scientist. Full programs of meetings listed under sections. Entry gives citation number, paper title, name, mailing address, and any ordering number assigned. Quarterly and annual indexes to subjects, authors, and programs (not available in monthly issues).
Download or read book Metallic Films for Electronic Optical and Magnetic Applications written by Katayun Barmak and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic films play an important role in modern technologies such as integrated circuits, information storage, displays, sensors, and coatings. Metallic Films for Electronic, Optical and Magnetic Applications reviews the structure, processing and properties of metallic films. Part one explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy. This part also encompasses the processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations. Chapters in part two focus on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties. Metallic Films for Electronic, Optical and Magnetic Applications is a technical resource for electronics components manufacturers, scientists, and engineers working in the semiconductor industry, product developers of sensors, displays, and other optoelectronic devices, and academics working in the field. Explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy Discusses processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations Focuses on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties
